Gift CardsContact UsOrder Status
Live Chat

Rogue Bookshelf Divider 2.0 - 4-Pack

★★★★★
★★★★★
3.3
8 Reviews
Made in U.S.A.

Rogue Bookshelf Divider 2.0 - 4-Pack

★★★★★
★★★★★
3.3
8 Reviews
Made in U.S.A.
$95.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight3.25LB (Per Divider)
Length10.5"
Width1.75"
Height9.625"
Steel Notes1/4" thick laser cut and bent steel
Other Product SpecsSold in sets of 4
Product Description

Separate Your Bumpers

Sold in sets of four, Rogue’s fully redesigned Bookshelf Dividers are the best accessories for keeping your stored plates fully upright and stabilized. With Version 2.0, we’ve moved to a more efficient, single-piece construction using 1/4" thick laser cut and bent steel. The divider measures 9.625" tall and an expanded 1.75" wide, meaning it contacts more surface area of the plate. The steel is also bent so as to make the Bookshelf Divider compatible with any 43” or 70” mass storage shelves.

Read More

Rogue Bookshelf Divider 2.0

Separate Your Bumpers

Sold in sets of four, Rogue’s fully redesigned Bookshelf Dividers are the best accessories for keeping your stored plates fully upright and stabilized. With Version 2.0, we’ve moved to a more efficient, single-piece construction using 1/4" thick laser cut and bent steel. The divider measures 9.625" tall and an expanded 1.75" wide, meaning it contacts more surface area of the plate. The steel is also bent so as to make the Bookshelf Divider compatible with any 43” or 70” mass storage shelves.

When placed haphazardly on a horizontal plate rack without dividers, bumper plates of varying sizes can easily fall over and pile up, making it harder for the next athlete to locate and dig out the plates he needs. Rogue’s Bookshelf Dividers eliminate this problem, keeping bumpers upright and easily accessible, while also making it easier to arrange different sets of plates by size increments.

These weight storage rack dividers are a virtual necessity for large gyms or affiliates, and can help bring order to smaller home and garage gyms, as well.

Gear Specs

Specifications:

  • Made in the USA
  • Compatible with the horizontal 43” and 70” plate racks of the Rogue Mass Storage System
  • 4 triangular bookshelf dividers per set
  • 1/4" thick laser cut and bent steel
  • 1.75" width
  • Top of the divider measures 9.625" from the base plate
  • Improved, Lock-In Installation with no hardware required
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Recommended Products

Reviews

1 - 8 of 8 Reviews
ActionJackson883
Irvine, CA
★★★★★
★★★★★
Sep 2022
Not sure why all the hatin’, these are great
This work as perfectly As anything like this could. Yes, they move a little when there is weight leaned on them, but that’s better then them being drilled in. Looks great, works great, would recommend. .
Yes, I recommend this product
Book shelf stabilizers
Helpful?
Yes · 2
No · 0
EClark
Denver CO
★★★★★
★★★★★
Jun 2022
Functional, but not what I expected from Rogue
These bookshelf dividers tilt on the storage system when plates lean on them. There is a hole on one end of the divider which would infer some mechanical connection, but nothing provided. I will now need to customize these expensive dividers to make them function as I expected.
Helpful?
Yes · 4
No · 0
RC LaHaye
Greenwood SC
★★★★★
★★★★★
Jan 2022
They move way too much & do not stay in place.
For the price you would expect something that stays in place. These do not. Big fan of Rogue, but this product is not good.
Helpful?
Yes · 2
No · 0
BADCOMPANY
Queens, NY, United States
★★★★★
★★★★★
Apr 2021
Great, but not Superior
Like a review said earlier great idea however ,when a load of heavy plates lean up against it. Then it’s Shifted.So I think there needs to be a design almost like a barbell clamp to lock it in place ,so that way it doesn’t scratch your thousand or $1200 rack. If that happens then this will be superior.
Yes, I recommend this product
Helpful?
Yes · 4
No · 0
Juaninads
St. Louis
★★★★★
★★★★★
Sep 2020
As advertised
Overpriced a bit I for what they are and what they do. Easy to adjust and they latch down when you apply pressure from standing plates. They could be a little thinner.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Dan R
Tampa, FL
★★★★★
★★★★★
Apr 2020
Better than expected, but room for improvement
After reading the single review on these, I was skeptical and prepared to be disappointed, but just putting these on this morning, they stay put a lot better than I was expecting. As you can see from the video below, the back side does slide a little when plates rock against it, but I did not experience any of the “20 degree lean”. There are holes on the backside of each divider, which I may attempt to put a bolt through to secure them in place even further, but all in all, they work pretty well. I would recommend that in the future, Rogue include hardware to lock these down tight, either using the existing hole on each divider, or redesign the end with a threaded hole that would accept a screw, allowing you to tighten it down to the rack.
Helpful?
Yes · 8
No · 0
bonafyde27
San Ramon, CA
★★★★★
★★★★★
Apr 2020
Better than expected
This is a well made accessory that goes with the shelf. I always had trouble getting the bumper plates in and out but this divider helps so much.
Yes, I recommend this product
My new bookshelf divider
Helpful?
Yes · 1
No · 0
makeitraines
Dover, NH
★★★★★
★★★★★
Jan 2020
Don't stay put very well
This is supposed to be the new and improved version.. they don't stay put very well at all. Leaning a plate against them will slide the divider an inch or two over and causes it to lean at about 20 degrees. I know this may seem like a minor annoyance (and it is, EVERY time you put a plate against it), but for the price I expected much better.
Helpful?
Yes · 13
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery