Rogue Vertical Plate Storage
Designed for use exclusively with Rogue’s Infinity Series racks and squat stands*, each one of these durable 13” storage pins can hold over 180 lbs of bumpers or cast iron plates. Simply mount the Vertical Plate Storage channel to any 2x3” Infinity upright using the provided detent pin and you’re good to go. The pin set-up also makes it easy to quickly remove a storage post or change its position at your convenience.
Rogue Vertical Plate Storage is available to order as a single or double unit.
Single Plate Storage: (1) 13” long, 7-gauge steel pin with 180+ LB storage capacity.
Double Plate Storage: (2) Connected 13” long, 7-gauge steel pins with 360+ LB storage capacity.
Important: Due to its larger size, the Double Plate Storage unit can limit the range where J-cups can be adjusted. For this reason, we recommend using two separate Single Plate Storage pins if you’re adding storage to a power rack of squat stand.
*Vertical Plate Storage is NOT recommended for the small S-1 Squat Stand, but IS compatible with the larger S-2 and S-3 stands.
- Made in the USA
- Length: 13”
- Plate Storage Capacity: 180+ lbs per post
- Detent Pin included
- Will mount ONLY to 2x3” Infinity uprights
Monster Lite Plate Storage Channel Pair (exclusively for Monster Lite rigs/racks)
Monster Plate Storage Channel Pair (exclusively for Monster rigs/racks)