Rogue S-2 Squat Stand
More Power Rack than Squat Stand!
|Product Weight||153 lbs.|
|Foot Print||48 x 48|
|Steel Notes||2 x 3 11 Gauge|
|Other Product Specs||Weight Capacity: Tested at 1,000 lbs.|
|Squat Stands||2x3" Steel, Pullup Bar|
|Made In USA||Yes|
|3 Ships Free||No|
Rogue S-2 Squat Stand
With 2x3” 11-gauge steel uprights, an adjustable fat/skinny pull-up bar, and a wide range of compatible accessories, the Rogue S-2 Squat Stand is more power rack than squat rack.
Built in Columbus, Ohio, the S-2 includes key innovations from the Rogue Infinity Series, including a unique upright/socket design, Westside hole spacing, 5/8” bolts and fasteners, and J-cups with protective UHMW plastic liners. It's a squat stand well suited to small home gyms and large-scale weight training facilities, with easy transitions from squats to bench, floor press to pull-ups, and anything in-between.
The S-2 Squat Stand’s 92” height gives you ample space for pull-ups under an 8-foot ceiling, while a compact 48x48” footprint leaves plenty of room for additions and customization. Compatible 2x3" accessories include Safety Spotter Arms , Rogue Landmines , and the Rogue Matador .
The Rogue S-2 Squat Stand and Bench ships with (1) S-2 Squat Stand and (1) Flat Utility Bench .
You can find helpful S-2 Squat Stand reviews and ratings, written by real customers, under the “Reviews” tab on this page. To compare the S-2 to other Rogue squat stands, visit themain page.
Rogue S-2 Squat Stand with Pull-up Bar:
- Made in Columbus, Ohio, USA
- Height: 92”
- Max Pull-up Bar Height for Fat/Skinny Bar: 80.5"
- Max Pull-up Bar Height for Single Skinny Bar: 88"
- Foot Print: 48x48”
- Weight: 153 lbs.
- Weight Capacity: 1,000+ lbs
- Steel: 2x3” 11-gauge steel tubing
- West Side hole pattern (1” through bench and clean pull zone, 2” spacing above and below)
- J-cups with UHMW plastic liner
- Fat and skinny pull-up bar options (2” or 1.25”)
Great RackReview by EcoRick
Wow! Great stand!Review by Steve Baker
Excellent !Review by Aussie FireBreather
Great piece of GearReview by RB
The only thing to keep in mind is that if you want to do KIPPING pull-ups you will need the floor mounting feet. No issues with dead hang pull-ups.
S2Review by Jake
NO WORRIES ANYMORE. This thing is a freaking rock and the versatility is exactly what I was looking for. My garage gym is OFFICIAL now, thank you Rogue for all you do. Gained more space in my garage AND added another pull-up/ring station.
Solid Quality!Review by Hector
Love it!Review by Flick45
I got the Stand with the Matador, Fat/skinny pull-up bar, flat bench, and mounting kit.
After putting it together and mounting it, this thing is virtually bomb proof.
The J-hooks fit so well, and the 'padding; on them protects the bar. The matador is a great piece and the fat pull-up bar is great for the grip. The bench is very sturdy.
I couldn't ask for more.
Great Rack and BenchReview by FerrousMaverick
The fat bar on the fat/skinny bar attachment is really fat. I can't get my thumbs around it, but it works if I use a false grip. That's tougher anyways.
The J-hooks are probably among the best I've used to date. They have enough padding so they won't wear your bar down, but they still hold the bar strongly. The hooks are also not too deep. You can rip the bar off the hooks when you are benching, which really helps when you don't have a spotter for a proper hand-off.
The bench is fantastic. It's nice and wide, providing great support for your shoulders. I understand it is competition height, so it's a great option for training for power lifting meets. Apparently the benches at the commercial gyms I've gone to are a bit lower than this, so it took a couple sessions to get used to it. Despite that, I've never felt more stable under the bar than when I'm on this bench.