Bolt your rack down.
These are the best solution we have found to bolt your Infinity Rig or rack to the ground. Traditional concrete wedge style anchors are a pain to use, once you sink the anchor in the ground grinding it off is the only way to remove it. Mangle the thread on a traditional anchor and you can forget about screwing on the nut.
The HD Concrete Anchor acts like a screw. Drill a 3/8" pilot hole with a masonry bit (a hammer drill helps here!) and you can drive the HD Concrete Anchor into the ground with a 9/16" socket. Want to move your rack? Simply unbolt the anchor, drill another pilot hole and bolt your rack back down. This anchor will make our life easier.
- Length: 3"
- Diameter: 3/8"
- Socket size: 9/16"
- Gear Specs
Length 3" Diameter 3/8" Other Product Specs Socket Size: 9/16" Made In USA No Free Shipping No 3 Ships Free No Echo Compatible Yes Infinity Compatible Yes Monster Lite Compatible Yes Monster Compatible Yes
- Images & Videos
Excellent anchorsReview by JimQualityI didn't use the ones from Rogue, but I bought the same ones from a local fastener company to anchor my R3 to the floor and they worked great. Mine said to drill the hole one size smaller then the fastener, so I used a 5/16" concrete bit. They screwed in easily once the hole was cleaned out and hold the rack perfectly. I used 2 per foot (8 total) and the rack is solid. Much easier to use then the wedge anchors.| Review for: Rogue HD Concrete Anchors