Monster Lite Pull-up Spheres

★★★★★
★★★★★
4.4
5 Avis
Fabrication aux États-Unis.

Monster Lite Pull-up Spheres

★★★★★
★★★★★
4.4
5 Avis
Fabrication aux États-Unis.
70,18 €
Excl. T.V.A.
58,00 €
3 articles livraison gratuite
Loading

3 articles livraison gratuite

Achetez 3 articles ou plus marqués "3 achats livraison gratuite" et ils seront tous livrés gratuitement

Caractéristiques

MarqueRogue Fitness
Couleur(s)Noir
Fabrication aux États-UnisOui
Diamètre3" / 5"
Description produit

The Monster Lite version of Roguess Pull-Up Spheres will mount easily to any 3" depth tubing with 0.625" diameter holes, making them compatible with our Monster Lite and Infinity Series* rigs and racks. A preferred grip strength tool among rock climbers, gymnasts, and martial artists, these powder-coated, 9-gauge steel 3" Spheres are sold in pairs.

Lire plus

Monster Lite Pull-up Spheres

The Monster Lite version of Rogues Pull-Up Spheres will mount easily to any 3" depth tubing with 0.625" diameter holes, making them compatible with our Monster Lite and Infinity Series* rigs and racks. A preferred grip strength tool among rock climbers, gymnasts, and martial artists, these powder-coated, 9-gauge steel 3" Spheres are sold in pairs.

Add a single set of Pull-Up Spheres to create a challenging new pull-up station or mount a sequenced series to turn your rig into a customized obstacle course. With a thread optimized for a 3" tube depth, these rack accessories can mount to either the side or bottom of any XML-70B or XML-43" crossmember with holes.

*Important: If mounting to an Infinity Series rack or rig, keep in mind that Monster Lite Pull-Up Spheres are optimized for the 3" depth of a 2x3" crossmember/upright.

See Also: Rogue's full selection of Grip Strength Training Tools

Caractéristiques

Monster Lite Pull-Up Spheres Specifications:

  • Fabrication aux États-Unis
  • Vendus par paires
  • 9-gauge Steel Construction with Black Powdercoat
  • Compatible with standard RML-3, RML-4, RML-6 Power Racks and Monster Lite Rigs with XML-70 Beam or 43” Monster Lite crossmembers
  • Thread optimized for 5/8" diameter holes, 3" depth of a crossmember/upright
  • For safety reasons, any rack should be securely fastened to the ground before using Pull-Up Spheres
Livraison

Livraison rapide Rogue

Le système de suivi de livraison Rogue vous permet de suivre votre commande de notre entrepôt au pas de votre porte. Commandez aujourd’hui, commencez à suivre aujourd’hui.

Produits recommandés

Avis

1 - 5 commentaires sur 5
Jonsunmc5
Massachusetts
★★★★★
★★★★★
Dec 2022
ML pull-up spheres
Great addition, for my monster rack even though it’s built for a monster lite. Just added a couple spacers and it works perfect!
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
STR8flexed
Sacramento
★★★★★
★★★★★
Aug 2021
Not bad
I like the way they look and they work well for a challenging neutral/hammer grip pull-ups. But, when doing hand pronates pull-ups it seems to be very hard on my fingers. I’m no expert but in the climbing literature there are known certain ways you should never hold onto climbing holds because it is prone to injuring certain finger pulls or ligaments, and I’m afraid if I grip these wrong I could also hurt myself. Or, it could be a combination of small hands and weak grip. I do like holding the ball with one hand and the pull-up bar with the other to do pull-ups or static hangs at the end of a workout for grip strength.
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
bill234
PA
★★★★★
★★★★★
Mar 2021
Excellent low profile attachment
Works great for hanging, pull-ups and neutral grip work. I got this to strengthen grip for Mountain Biking, great change up from bar pull-ups. Attached to the rack it looks badass and low-profile. Go with the 3” unless you’re a grip pro or think you must have the ‘bigger’ ones.
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
Joe from Toetown
Louisiana
★★★★★
★★★★★
May 2015
Legit.
I recently added the 3" spheres to my RML-390F and couldn't be happier. I couldn't fit the monkey bar crossmember due to low ceilings so these were a great alternative. They add a great variation from the standard pull-up bar. You can also do neutral grip pull ups on these, so it makes them pretty versatile. The 3" is a great size (I am 5'7" with pretty average sized hands) to work on grip strength. My only slight 'issue' was I didn't know how tight to crank these down. There is a rubber spacer and the more you tighten the nut, the more the spacer 'crushes.' I just tightened each until they felt solid and ended up with 5 threads showing on each screw. Works for me. Oh and the quality is excellent.. perfect powder coating and solid hardware. Well done Rogue. Well done.
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
Todd K
Salt Lake City, UT, United States
★★★★★
★★★★★
Mar 2015
Try the 3" spheres first...
Having large hands, I immediately jumped to the 5" sphere -- in hindsight, given the different stresses on grip and wrist, I would recommend starting with the 3" model to build the requisite hand strength to fully utilize this piece of equipment. Build quality is first rate, though the bolt threads are showing signs of oxidation (my rig is outdoors); not a galvanized / treated piece of hardware (like the fasteners shipped with Rogue rig products); does not impact the functionality of the rig. I touched it up with Krylon / Rustoleum textured paint to soothe my OCD eyes.
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
#RYOUROGUETaguez vos photos sur Instagram et Twitter avec #RYOUROGUE pour avoir une chance de figurer dans notre galerieVoir galerie complète