Rogue Monster Plate Storage Pin
Rogue Monster Plate Storage Pin
Fixation*
Longueur*
Taille de l'emballage*
Caractéristiques | |
| Marque | Rogue Fitness |
| Couleur(s) | Noir |
| Fabrication aux États-Unis | Oui |
| Longueur | 6.75" ou 12.75" (longueur chargeable) |
| Diamètre | 1.9" |
| Acier | Composants métalliques usinés en plaqué zinc noir |
| Autres caractéristiques | Tige usinée en acétal avec noyau en acier |
Description produit
Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.
Lire plus
Rogue Monster Plate Storage Pins
Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.
The Monster Plate Storage Pin is available in two styles (Keyhole and Keyless) and two lengths (6.75” or 12.75” loadable length). All versions are intended exclusively for use with Rogue Monster Series power racks, rigs, and wall-mount units, and are NOT compatible with our Monster Lite, Infinity, or Econ lines. You can order your Monster Pins in a multitude of package options: single, pair, 4-pack, or 8-pack.
Patented
Caractéristiques
Specifications:
- Made in the USA
- Bumper Plate Storage Posts - Exclusively for Rogue Monster Series Racks & Rigs
- Available Individually, in Pairs, or as 4-pack or 8-pack
- Post Diameter: 1.9"
- Post Lengths: 6.75" or 12.75" (loadable length)
- 12.75” Pin Capacity: 180LB of bumpers and up to 540LB of steel plates.
- 6.75” Pin Capacity: 180LB of steel plates / Ideal for storing your change plates and smaller increments of steel.
- Machined Acetal Sheath
- Acetal Washers
- Keyhole and Keyless options
- Threaded Nut comes standard for tightening (optional Knurled Knob also available)
- Metal Finish: Proprietary Matte Black
Livraison
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.
LES DEUX MODÈLES DE TIGE DE RANGEMENT MONSTER :
Keyhole Pin: Includes a specialized nub for installation into the keyholes of a Monster rack/rig. NOT compatible with standard 1” holes.
Keyless Pin: (no nub): Designed to be compatible with the keyholes AND the standard 1” holes of a Monster rack/rig.
Note: All metal parts of the post, regardless of the size and variation, are finished in Black Zinc.
Tube fileté avec revêtement en acétal
Consists of a 1" diameter threaded pin and 1.9" OD machined Acetal plastic sheath. Acetal is a high-end thermoplastic material noted for its light weight, low-friction, and wear-resistant qualities. It offers a unique combination of strength, rigidity, and dimensional stability beyond that of traditional plastic coatings, not to mention a more consistent, uniform appearance. We've also included (2) Acetal Washers that sandwich each side of the upright to keep the powder-coat protected from any damage.
Options avec trou à clé et sans clé
Customers can choose between our standard Keyhole Pin, which features a machined nut with a special nub designed to fit the keyhole of our Monster racks; or a Keyless variation, which is designed to fit the keyholes AND the standard 1” holes of a Monster rack. Both versions are made to ensure a tight fit that won’t allow sagging or spinning even when the post is fully loaded.
Écrou fileté ou bouton moleté au choix
The storage pin comes standard with a machined nut that goes through the threaded end of the post, on the opposite side of the upright from where the plates are stored. Users can tighten this nut with one of our 1" Monster Wrenches (these wrenches come standard with our Monster Racks but can also be Purchased a la carte). As an alternative, customers can also opt to purchase our new Monster Knurled Knob, which enables the adjustment of the post’s height WITHOUT the need of a wrench or other tools. Available as a single or a pair, this patent pending machined knob includes an acetal insert on one side (to protect the customer’s uprights) and a knurled outside surface with a black zinc finish. It measures 2.125" in diameter, weighs 0.57 LBS, and is compatible ONLY with our 1" threaded pins (or 1" hardware).