Kabuki Kadillac Bar

★★★★★
★★★★★
4.8
19 Reviews
Made in U.S.A.

Kabuki Kadillac Bar

★★★★★
★★★★★
4.8
19 Reviews
Made in U.S.A.
£445.30
Excl. VAT
£371.08
Product Description

The Kabuki Strength Kadillac Bar is manufactured in Ohio by Rogue Fitness and includes the addition of knurled handles and our Signature Texture Black powdercoat finish.

Read More

Kabuki Kadillac Bar

The Kabuki Strength Kadillac Bar is manufactured in Ohio by Rogue Fitness and includes the addition of knurled handles and our Signature Texture Black powdercoat finish.

Cambered to the same angle as Kabuki’s Duffalo Bar, the Kadillac Bar is a specialty neutral grip / football bar that enables a full range of motion, with convenient rackability on any standard power rack (40.5” to 52.5”). The bar includes 1.33” diameter handles spaced 15.3”, 22.3”, and 29.2” apart, with 10°, 12.5°, and 15° grip angles. The variability of handle placement and angles offers countless variations in exercises and progressions, and also promotes optimal, stacked joint position and improved movement mechanics. 

Athletes can utilize the Kadillac Bar in both standard and reverse grip positions, and the precision-machined, zinc-plated sleeves (with 16.7” loadable length) enable the use of regular barbell collars. The sleeves are also removable, reducing the overall shipping cost. A 9/16” wrench and 7/32” hex key are included for easy assembly.

While the Kadillac Bar is primarily a bench press / neutral grip football barbell, it can also be used for curls, skull crushers, rows, lat pull-downs, and more.

Gear Specs

Specifications:

  • Manufactured by Rogue in Columbus, Ohio
  • Cambered Neutral Grip / Football Barbell
  • Unloaded Weight: 45LB
  • Total Bar Length: 87.5"
  • Fits racks 40.5” to 52.5”
  • 1/4” Laser-cut Frame with a cambered edge to help increase range of motion
  • 1.330” OD Handles: laser-cut and knurled with a 10°,12.5°, and 15° grip angle
  • Handle Spacing: 15.3” 22.3”, 29.2” (narrow, mid, and wide, measured from the center of the handle)
  • Standard and Reverse Grip options
  • Rogue Signature Texture Black Powder-coat finish
  • Sleeves: Zinc finish + 16.7” loadable length, fits standard barbell collars
  • Easy Assembly using included 9/16” wrench and 7/32” hex key


Browse More: Specialty Bars Available from Rogue


Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Product Specifications: Kabuki Kadillac Bar
Product Specifications: Kabuki Kadillac Bar

Gear Specs

BrandKabuki Strength
ColorBlack
Made In USAYes
Width7"
Other Product SpecsDistance between rackable portion of the bar: 40.5"
Loadable Sleeve Length16.7"
Bar Length87.5"
Distance Between Sleeves53.7"
Bar UseSpecialty
Bar Weight45LB
Sleeve CoatingBright Zinc

Key Features of the Kadillac Bar

Multiple Knurled Handles
1

Multiple Knurled Handles

Now manufactured by Rogue Fitness, the new Kadillac Bar includes a set of (6) 1.33” diameter handles spaced at 15.3”, 22.3”, and 29.2” apart. Combined with the cambered design of the bar, this creates three different angles for hand positioning, at 10°, 12.5°, or 15°. Along with enabling more types of exercises and progressions, this variation in grip options also promotes optimal, stacked joint position and improved movement mechanics for athletes of any size or experience level.

Beneficial Cambered Design
2

Beneficial Cambered Design

The 1/4” laser-cut frame of the Kadillac Bar is cambered or angled in the same manner as the Kabuki Duffalo Bar, and similarly can help reduce stress on the shoulders, biceps, and back, while enabling scapular retraction and superior joint centration. In the form of a multi-grip bar, the camber also improves stability and opens up a greater range of motion when the athletes uses the outer handles for exercises like the bench or rows.

Recommended Products

Reviews

1 - 8 of 19 Reviews
Jaygrey
Sonora ,CA
★★★★★
★★★★★
January 24
Black finish
Great bar! Definitely helps shoulders. I ordered the matte black finish but when I slide my plate on it scratches the finish instantly. Not worth the extra money for matte black finish.
Yes, I recommend this product
Originally posted on roguefitness.com

Response from Rogue Fitness:

5 weeks ago
Thank you for the feedback on your Kabuki Kadillac Bar! What you are seeing are not scratches, and can be wiped off with a rag.
JasonTX
Texas
★★★★★
★★★★★
January 15
Amazing Product!
This is a fantastic product. Anyone that lifts hard enough, heavy enough, and long enough will develop some kind of injury history. It's just a given, if you push yourself hard enough for long enough. With that being said, I have some shoulder discomfort after a heavy bench press workout. I have pushed through for years and just considered it "normal soreness". I ran across this bar though recently, and after a ton of research decided to buy. All I can say it that I wish I would have gotten this bar years ago. The pump I get from using this bar is crazy, and it helps basically alleviate the majority of shoulder discomfort during/after a bench workout. The pump is probably due to the increased range of motion from the curvature of the bar, allowing you to lower your hands further on the eccentric phase of the lift than you could with a traditional straight bar, and the more natural hand angle change helps with the shoulder issues. I could write another paragraph about how much I like this bar, but instead I will leave you with this final thought. Buy this bar. Even if you don't have shoulder issues, you should still buy this bar. It's a great alternative to straight bar bench, and again, with the added range of motion and change in hand angle to a more natural position, it's great for muscular hypertrophy as well as strength. Hope this review helps anyone that was on the fence about this purchase.
Yes, I recommend this product
Originally posted on roguefitness.com
Homegymthesweetspot
The Netherlands
★★★★★
★★★★★
Dec 2023
Great bar!
Bought this 6months ago. Not using a straight bar a lot after this. The grip with is a little thicker, wich I like. The bar isn't wobbly and the curve is perfect. Three positions is enough. I use it for (incline) pressing, rows, curls and extensions. All the people who come over for a workout love this bar as well.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
M Webster
Cumming GA
★★★★★
★★★★★
Oct 2023
Excellent bar very well bult!!!
Took longer than expected t ship but it was worth the wait!! Great for Bench Presses as the hand angle takes the shoulder out of the movement.
Yes, I recommend this product
Originally posted on roguefitness.com
Nedd
Lexington sc
★★★★★
★★★★★
May 2023
Perfect
66 years old and can bench again with no shoulder problems.
Yes, I recommend this product
Originally posted on roguefitness.com
Ellijay, GA
★★★★★
★★★★★
May 2023
Love this bar!
I bought this bar a little while ago and it’s a great addition for my space! Love all of the different exercises I can do with it without putting my shoulder replacement in a precarious position. Quality is amazing and love the bar with the PMB sleeves! Seen people complain about the loudness of the sleeves but I think they are nitpicking with all that! Def purchasing more Kabuki x Rogue bars in the future!
Yes, I recommend this product
Kabuki x Rogue
Originally posted on roguefitness.com
Kentucky Mike
Louisville, KY
★★★★★
★★★★★
Mar 2023
Great bar, terrible sleeves
As others have said, the ribbed sleeves cause a screeching noise as you move plates on and off. The noise is bad enough, but the real frustration is that it is scraping the black corrosion resistant coating off the insides of my plates. So now I’m going to be fighting rust on my plates because of damage done by this expensive bar. Otherwise, I love it. Tremendous improvement in terms of stress on my shoulder impingement. Much better focus on chest and triceps than I get from a standard bar. Excellent knurling. Glad I got it, but I really wish they offered this with smooth sleeves. Two stars off may seem harsh for the sleeve problem, but a bar this expensive shouldn’t damage my other expensive equipment.
Yes, I recommend this product
Originally posted on roguefitness.com
pedrousf
GA
★★★★★
★★★★★
Mar 2023
Great for a few variations
Sleeve: PMB I bought this back in November and it has been a game changer to add some variation. So much less stress on shoulders. The new sleeve finish is tight so I don't even have to use collars. Probably not great if you are changing weight quickly but I don't need to do this often. The tool also came with a cool bottle opener.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery