ORDER BEFORE 3PM EST 12/12 TO GET YOUR GEAR BEFORE CHRISTMAS. E-Gift Cards are available. Click for Details
Live Chat

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
601 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
601 Reviews
Made in U.S.A.
Hundo Pricing
KB-9LB (4KG) Rogue Kettlebell - E Coat
£30.91
KB-13LB (6KG) Rogue Kettlebell - E Coat
£36.06
KB-18LB (8KG) Rogue Kettlebell - E Coat
£41.21
KB-26LB (12KG) Rogue Kettlebell - E Coat
£46.36
KB-35LB (16KG) Rogue Kettlebell - E Coat
£61.82
KB-40LB (18KG) Rogue Kettlebell - E Coat
£66.97
KB-44LB (20KG) Rogue Kettlebell - E Coat
£72.12
KB-53LB (24KG) Rogue Kettlebell - E Coat
£80.36
KB-62LB (28KG) Rogue Kettlebell - E Coat
£92.73
KB-70LB (32KG) Rogue Kettlebell - E Coat
£103.03
KB-80LB (36KG) Rogue Kettlebell - E Coat
£113.33
KB-88LB (40KG) Rogue Kettlebell - E Coat
£128.79
Pounds Away From HundoPricing
500LB
Total Price:
£0.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"

Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).
Loading

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Note: *Due to the casting process, cast products may have minor variances in the finish.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

Loading
1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

Loading
2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

Loading
3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

Loading
4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

Loading
5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 601 Reviews
Siegfried N
Washington D.C.
★★★★★
★★★★★
5 weeks ago
Building towards a set!
Fantastic kettlebell, actually prefer e-coat to the powder coat, looks grippier than you'd think and isn't as rough on the hands even with chalk.
Yes, I recommend this product
Originally posted on roguefitness.com
Siegfried I
Washingon D.C
★★★★★
★★★★★
November 3
Quality seems to have slipped.
I unboxed my new 44 lb E-Coat today and found it had all sorts of pitting and divots as well as ugly grinder marks and an abrasive lip under the handle. This is a shame because this is the first kettlebell I've purchased from Rogue with this poor of fit and fimish. I've purchased a few of these, building a set over the years and have been impressed with the durability of the finish, but also with the quality of the castings underneath. And that makes me sad that they let this one ship.
Fresh out of the box
Originally posted on roguefitness.com

Response from Rogue Fitness:

November 3
We're sorry to see your kettlebell arrived like this! Our team has a replacement on the way to you now.
Garret S
Chicago, IL
★★★★★
★★★★★
October 20
Home Physical Therapy
I am using this for PT at home now for a broken arm injury. I love the fact I can get high quality equipment for use at home. Kick a$$ equipment, get some now!
Yes, I recommend this product
Originally posted on roguefitness.com
AlphaMedic
Texas
★★★★★
★★★★★
October 2
Coating too thin
I bought this 2-3 months ago and the grip is great. I wanted something made here in the States and was willing to pay a little more for it, but the coating is not very durable. I have some cheap CAP KBS that have been outside for over 10 years and do not have as much rust as this E-coated KB from Rogue. A little disappointed with it
Originally posted on roguefitness.com

Response from Rogue Fitness:

October 6
We're sorry to see this inconsistency with your kettlebell. This has been reviewed and we have sent out a replacement. We do recommend storing these indoors to prevent oxidation down the road.
ACab
Saginaw, MI
★★★★★
★★★★★
September 1
Quality product
I bought the 24kg Ecoat kettlebell. Packaging was perfect, came double boxed and no damage. The ECoat is a bit more slippery than powder coat but I have noticed that this is more durable. Quality product from Rogue. I’ll be buying more in the near future.
Yes, I recommend this product
Originally posted on roguefitness.com
Allendaniel
Philadelphia PA
★★★★★
★★★★★
July 9
Thoughtfully made and meets expectations
I am gradually moving through the Pavel program, “Simple and Sinister” and as I need a new bell, Rogue delivers. Great kettbells, and the E Coat is my preference.
Yes, I recommend this product
Originally posted on roguefitness.com
Dej Dej
New Jersey
★★★★★
★★★★★
June 30
Really heavy
I brought it a Month and half ago, I’m happy I did, I love using them at home.
Yes, I recommend this product
35 LB kettlebell.
Originally posted on roguefitness.com
Sweating on the coast
Sugar land Texas
★★★★★
★★★★★
June 23
Two year review
I bought this kettlebell two years ago and I have to say the finish is great for looks. It doesn’t chip like my other rouge kettlebells. I will have to say it does not hold Chalk like my other bells and it gets slick when I’m working out in my garage and sweating. Just keep that in mind when choosing a coating.
E-coat
One of my big boys. Holds chalk well
Beauties
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery