Gift CardsContact UsOrder Status
Live Chat

Rogue Monster Plate Storage Pin

★★★★★
★★★★★
4.8
36 Reviews
Made in U.S.A.

Rogue Monster Plate Storage Pin

★★★★★
★★★★★
4.8
36 Reviews
Made in U.S.A.
£64.00
Excl. VAT
£53.33

Mount*

Length*

Pack Size*

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Length6.75" or 12.75" (loadable length)
Diameter1.9"
Steel NotesMachined Black Zinc plated metal components
Other Product SpecsMachined Acetal Plastic Post with steel core
Product Description

Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.

Read More

Rogue Monster Plate Storage Pins

Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.

The Monster Plate Storage Pin is available in two styles (Keyhole and Keyless) and two lengths (6.75” or 12.75” loadable length). All versions are intended exclusively for use with  Rogue Monster Series power racks, rigs, and wall-mount units, and are NOT compatible with our Infinity or Econ lines. You can order your Monster Pins in a multitude of package options: single, pair, 4-pack, or 8-pack.

Patented

Gear Specs

Specifications:

  • Made in the USA
  • Bumper Plate Storage Posts - Exclusively for Rogue Monster Series Racks & Rigs
  • Available Individually, in Pairs, or as 4-pack or 8-pack
  • Post Diameter: 1.9"
  • Post Lengths: 6.75" or 12.75" (loadable length)
  • 12.75” Pin Capacity: 180LB of bumpers and up to 540LB of steel plates.
  • 6.75” Pin Capacity: 180LB of steel plates / Ideal for storing your change plates and smaller increments of steel.
  • Machined Acetal Sheath
  • Acetal Washers
  • Keyhole and Keyless options
  • Threaded Nut comes standard for tightening (optional Knurled Knob also available)
  • Metal Finish: Proprietary Matte Black
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

​THE TWO STYLES OF MONSTER STORAGE PIN:

Keyhole Pin: Includes a specialized nub for installation into the keyholes of a Monster rack/rig. NOT compatible with standard 1” holes.

Keyless Pin: (no nub): Designed to be compatible with the keyholes AND the standard 1” holes of a Monster rack/rig.

Note: All metal parts of the post, regardless of the size and variation, are finished in Black Zinc.

Threaded Post w/ Acetal Cover
1

Threaded Post w/ Acetal Cover

Consists of a 1" diameter threaded pin and 1.9" OD machined Acetal plastic sheath. Acetal is a high-end thermoplastic material noted for its light weight, low-friction, and wear-resistant qualities. It offers a unique combination of strength, rigidity, and dimensional stability beyond that of traditional plastic coatings, not to mention a more consistent, uniform appearance. We've also included (2) Acetal Washers that sandwich each side of the upright to keep the powder-coat protected from any damage.

Keyhole & Keyless Options
2

Keyhole & Keyless Options

Customers can choose between our standard Keyhole Pin, which features a machined nut with a special nub designed to fit the keyhole of our Monster racks; or a Keyless variation, which is designed to fit the keyholes AND the standard 1” holes of a Monster rack. Both versions are made to ensure a tight fit that won’t allow sagging or spinning even when the post is fully loaded.

Choice of Threaded Nut or Knurled Knob
3

Choice of Threaded Nut or Knurled Knob

The storage pin comes standard with a machined nut that goes through the threaded end of the post, on the opposite side of the upright from where the plates are stored. Users can tighten this nut with one of our 1" Monster Wrenches (these wrenches come standard with our Monster Racks but can also be Purchased a la carte). As an alternative, customers can also opt to purchase our new Monster Knurled Knob, which enables the adjustment of the post’s height WITHOUT the need of a wrench or other tools. Available as a single or a pair, this patent pending machined knob includes an acetal insert on one side (to protect the customer’s uprights) and a knurled outside surface with a black zinc finish. It measures 2.125" in diameter, weighs 0.57 LBS, and is compatible ONLY with our 1" threaded pins (or 1" hardware).

Recommended Products

Reviews

1 - 8 of 36 Reviews
R P M
NE Oregon
★★★★★
★★★★★
1 week ago
Works great
The work great. One thing I was uncertain about was how tight to go with the wrench. Are they designed for some torque, or is hand-tight optimal? I went easy and nothing sags…just wasn’t sure.
Yes, I recommend this product
Originally posted on roguefitness.com
EC101
★★★★★
★★★★★
3 weeks ago
Simple
Nice, clean and simple….. Wish they made it for the ML series. Had to return due to me not reading the description well enough.
Yes, I recommend this product
Originally posted on roguefitness.com
Keto strong
★★★★★
★★★★★
March 5
Perfect way to store all of my plates.
I bought these to store my fractional plates. The Acetal coating makes it easy to slide the weights on and off. I have all of my iron plates on these pins and they are incredibly sturdy.
Yes, I recommend this product
Originally posted on roguefitness.com
Roger Bingman
Athens, Ohio
★★★★★
★★★★★
February 15
Rogue Monster Plate Storage
As advertised, The quality is everything you would expect from Rogue.
Yes, I recommend this product
Originally posted on roguefitness.com
Brandon S
Phoenix, AZ
★★★★★
★★★★★
February 14
Great Storage Pins
These storage pins are well built and the sleeve coating seems to hold up pretty decently over time as they get worn in. I wish they were priced a bit lower considering these are close to the top end for a storage pin, but I’m satisfied overall. I got the 6” keyless ones because I don’t have enough clearance for 12” on both sides of my rack.
Yes, I recommend this product
Plenty of space for non-bumpers
Older worn in pin
New pin
Originally posted on roguefitness.com
Coreya
KY
★★★★★
★★★★★
Oct 2023
Best Plate Storage Options for Monster Series!
Loved these! I love that they are a rubberized material, are easy to move with the keyhole, and allow the plates to fit snug on the pin.
Yes, I recommend this product
Originally posted on roguefitness.com
Marcel
Tavernier, Florida
★★★★★
★★★★★
Oct 2023
Have any doubt? Don't. Go for it!
Solid like a rock. Well designed and convenient in a small home gym. There is no concern to be had.
Yes, I recommend this product
Originally posted on roguefitness.com
Eric39
Pa
★★★★★
★★★★★
Dec 2022
It fits great on a non standard rack w 3'' holes
I bought two of the shorter ones and two of the longer ones, they're easy to install and are really sturdy plus they can hold allot of weight. The other kind would've not fit on my rack.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery