Hot Deals | On Popular Gear
+
Hundo Pricing | Buy More Save More

Monster Lite Stabilizer Kit

4.5
26 Recensioni
Prodotto negli Usa

Monster Lite Stabilizer Kit

4.5
26 Recensioni
Prodotto negli Usa
128,10 €
I.V.A. esclusa
105,00 €

Seleziona Finitura bullone*

Caratteristiche del prodotto

MarcaRogue Fitness
ColoreTesturizzata Nero
Prodotto negli UsaSÌ
Lunghezza43"
Larghezza3"
Informazioni sull'acciaio3x3" in acciaio calibro 11
Altre specifiche del prodottoElementi di fissaggio, parti di montaggio incluse

Descrizione prodotto

Our Monster Lite Stabilizer Kit is now available a la carte, offering gym owners a simple but effective way to reinforce any freestanding Rogue Monster Lite Power Rack.

Leggi ancora

Monster Lite Stabilizer Kit

Our Monster Lite Stabilizer Kit is now available a la carte, offering gym owners a simple but effective way to reinforce any freestanding Rogue Monster Lite Power Rack.

Raccomandiamo sempre di fissare il power rack al pavimento per una stabilità ottimale. Tuttavia, se ciò non fosse possibile nel vostro spazio di allenamento, l'aggiunta di questa traversa posteriore stabilizzatrice garantirà che i montanti siano sempre correttamente distanziati alla distanza specificata di 43 pollici (circa 109 cm), mantenendo il rack squadrato, rigido e robusto anche durante un utilizzo regolare ad alta intensità.

The kit comes with (1) 43” Monster Lite Crossmember, made from the same 3x3” 11-gauge steel as your existing ML rack, and finished in our signature texture black powdercoat. The endplate on the crossmember measures 8” tall x 3” wide and features mounting holes 6” on center. All required mounting hardware is included with the package and can be ordered with either a bright zinc or black zinc finish—in order to better match your rack’s current hardware.


Caratteristiche del prodotto

Caratteristiche

  • Prodotto negli Stati Uniti
  • Stabilizer Crossmember for Back Uprights of Monster Lite Power Racks
  • 43” Crossmember: 3x3” 11-gauge steel, Texture Black Powdercoat finish
  • 8” x 3” Endplate: holes 6” on center
  • Hardware Set: (4) 5/8” x 4.5” bolts, 5/8” flat washers, 5/8” lock washers, and 5/8” nuts
  • Hardware Finish Options: Black Zinc or Bright Zinc

Browse More: Monster Lite Add-Ons and Accessories

Spedizione

Spedizione veloce Rogue

Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.

Prodotti consigliati

Recensioni e valutazioni

4.5
Recensioni 26

1 - 8 di 26 Recensioni

EffRed
Sout Central Washington State
3 weeks ago
RML 390 Will Now Resist a MOAB...
Completes my RML 390 30" rack. I bought 3 of these stabilizers, one each for rear top & bottom, one for front top. It's solid! As I have old, old concrete (hard) that has rebar, I encountered difficulty drilling. (DIABLO makes concrete bits designed for drilling rebar - haven't used yet). So I bought these stabilizers with an eye to eliminating drilling. I have 500 + pounds of weights on the front and back bottom store-bars. I'll never be able to do anything that might tip this rack as installed, given that I'm working with 500 lbs. lf it ever does tip, either the ceiling (2" above top of rack) will stop it, or I'll die, or I'll come back and drill a couple holes with the DIABLOS. Rogue products are simple, rugged, strong - impressively so. Easily put together. Note that both gloss and matte finishes are available, according to Rogue. Pick the one you want.
Sì, Consiglio questo prodotto
Pubblicato originariamente su roguefitness.com
JollyRogerGym
The Woodlands, TX
September 24
Definitely stablizes
I us my SM-1 Monster Squat stand exclusively for bench presses and wanted a bit more stability so put the stabilizer across it. Worked perfectly and made it very solid.
Sì, Consiglio questo prodotto
Pubblicato originariamente su roguefitness.com
JarJar
San Antonio, TX
June 3
Great Addition to HR rack
This was a great addition and it stabilized our HR rack. I feel more comfortable doing pull ups and the weights don’t rattle as much.
Pubblicato originariamente su roguefitness.com
Ngbrew62
Arkansas
April 17
Does its job!
Great addition to my HR-2 rack that has reduced almost altogether the shaking from doing dips or hitting heavy bag attached via shrimp trawler arm. Highly recommend if you intend to do anything other than barbell work on your rack.
Sì, Consiglio questo prodotto
Pubblicato originariamente su roguefitness.com
MTbone
January 23
Great addition to the HR-2
I know it says this is not for the HR-2, but it works great and makes the HR-2 100% rock solid. Very happy with the addition of this. I also swapped out the 4.5 inch hardware for 5 inch, so I could still put a plate storage post on the other side of the rack. VERY happy with this!
Sì, Consiglio questo prodotto
Pubblicato originariamente su roguefitness.com
Michael Labonte
January 22
Added stability and function.
I only got it to attach the Crown Pull Up bar. It is more functional than the standard stock pull up bar.
Pubblicato originariamente su roguefitness.com
TDM01
Jan 2025
No Hardware!
Bought this item and it was sent without any hardware, wth. Very disappointed.
Pubblicato originariamente su roguefitness.com

Risposta da Rogue Fitness:

Jan 2025
Thank you for bringing this to our attention! After review, the box containing the hardware was damaged in transit. We apologize for the issue and have overnighted you a replacement.
YourPublicName
Detroit, MI
Nov 2024
Versatile, Adds Stability
Added a ton of stability to my beat up old HR2. Having the holes cut in has allowed me to 3D print a bunch of attachments to hang my belt, matador, change plates and more. Once I no longer have a weak little baby back I’ll be swapping this for my pull up bar and 3D printing pull up attachments to get wild with it.
Sì, Consiglio questo prodotto
Pubblicato originariamente su roguefitness.com
#RYOUROGUETagga le tue foto su Instagram e Twitter con #RYOUROGUE per avere la possibilità di comparire nella nostra galleriaVisualizza la galleria completa