Squat Stand Wheel Bracket Set

Compatible with Rogue’s SML and S-Series squat stands (with the exception of the S-4 model), this convenient Wheel Bracket Set allows gym owners to maximize their floor space and roll a unit safely out of the way when not in use.

The (2) brackets are Made in the USA from 3/8" thick laser-cut steel, and mount to the 5/8” holes at the base of an Infinity or Monster Lite squat stand. The durable wheels measure 3” in diameter. Customers have the option of adding a pair of band pegs to their order (selectable in the purchase area), which can be inserted into the front base tubes to serve as safety handles when moving the unit.

Important Safety Notes: The optional band pegs should be used ONLY for moving the stand; they could represent a tripping hazard when installed toward the inside of the rack and should be removed prior to using the stand for any workouts. Banded work should NOT be done on squat stands unless they are securely fastened to the floor. Make sure all bars, weights, and attachments have been removed from the stand before moving it. For optimal safety, Rogue recommends moving larger squat stands with the help of a second person.

Notes on Set-Up: 
No hardware is included with the Bracket Set; customers will utilize their squat stand’s existing hardware. A 15/16” Socket/Wrench is required for installing the Wheel Brackets. Customers will need to unscrew their stand’s existing 5/8” bolt assembly (where the crossmember attaches to the base tubes) and discard the flat washers on the outside of the assembly. This will allow the Hex Bolt to properly engage the Hex Nut threads. Do NOT remove the Split Lock Washers on the inside of the assembly. The wheels should be oriented outward and slightly raised from the ground.

Browse More Infinity and Monster Lite Accessories Available from Rogue