Gift CardsContact UsOrder Status
Live Chat

Rogue RM-3 Monster Rack 2.0

★★★★★
★★★★★
4.9
83 Reviews
Made in U.S.A.
Product Image

Rogue RM-3 Monster Rack 2.0

★★★★★
★★★★★
4.9
83 Reviews
Made in U.S.A.
$1,285.00

Color (10)*Satin Black

Height*

Gear Specs

BrandRogue Fitness
Made In USAYes
Length36"
Width49"
Height90.375", 100.375", or 108.375"
Foot Print40" x 53"
Steel Notes3x3" 11 Gauge Steel
Monster CompatibleYes
Product Description

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

Read More

Rogue RM-3 Monster Rack 2.0

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

The 30" depth RM-3 Monster Rack is available in three height options (90”, 100”, 108”); comes with all required 1" hardware and 4 band pegs; and ships standard with (2) Rogue Monster 1.5" Wrenches. Any other attachments and accessories pictured are NOT included. You can explore many of our compatible Monster Rack attachments on this page and add selections to your order (at a listed additional cost) via the convenient dropdown menu.

Updates on Color Options: The new Monster Rack 2.0 units include a dozen different custom color coating options, most of them in a medium gloss powder coat (the Satin Clear finish is a transparent finish, meaning any blemishes or marks from the manufacturing process will still be visible in the steel). 

Check out ALL of the custom options available on the 30" depth RM-3 Monster Rack below.

Important: This rack must be bolted to the floor before use.

Explore the Monster Rack Attachments.

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Monster Series vs. Infinity Series

UPRIGHT HEIGHT

All Monster uprights are made from 3x3" 11 Gauge Steel and include 1" holes spaced 2" on center.

90"
Allows a 43" Single Pull-Up Bar to be mounted at a max height of 84" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Available at a slightly reduced price from standard 100" unit.

100" (Standard)
The Monster's default height selection. Allows a 43" Single Pull-Up Bar to be mounted at a max height of 94" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack.

108"
Allows a 43" Single Pull-Up Bar to be mounted at a max height of 102" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Priced slightly higher than standard 100" unit.

Colors

AVAILABLE IN 11 CUSTOM COLORS + STAINLESS STEEL OR CERAKOTE:

Bright Blue, Bright Green, Burnt Orange, Dark Blue, Dark Red, Gun Metal, Light Gray, Rogue Red, White, Satin Clear, Satin Black (Standard)

All color options come in a durable, medium gloss powder coat.


Hardware

2 HARDWARE FINISHES

Choose between Proprietary Matte Black or Bright Zinc.

Crossmembers

XM-431 Monster 43” Single Pull-Up Bar

Our standard, default selection for the front of the rack, this single 1.25" diameter pull-up bar includes 9" endplates and , along with a textured black powder coat finish.

XM-43N Monster 43” Crossmember w/ Nameplate

Features a Satin Black base crossmember with laser cut "ROGUE" panels on each side. Red is the default panel color, but if a customer selects a custom color, the panel will change to match it.

XM-433 Monster Fat/Skinny Pull-Up Bar

Includes (1) 1.25" pull-up bar and (1) 2" fat grip pull-up bar built in to the same crossmember, spaced 9.5" on center. The large endplate is 17" overall, and mounting holes are 14" on center. Finish is our standard textured black powder coat.

XM-432 Monster 43” Single Fat Bar

A wider, 2" diameter version of the standard Single Pull-Up Bar, this option also includes 9" end plates with and our textured black powder coat finish.

XM-43P Monster 43” Beam w/ Gusset

A new Monster crossmember designed with 2 gussets for added strength and a flush mount with the top of the uprights. Includes laser-cut "R" logos on each gusset and a Satin Black powder coat finish across the beam. Does NOT function as a pull-up bar.

43" Monster Socket Pull-Up Bars

Single bar available in a wide range of custom Cerakote color finishes with optional barbell-style knurling. Ships standard with (2) MG Black mounting sockets and (4) Bright Zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. The bar itself is 1.125" in diameter, and all Cerakote-coated versions include the Rogue logo in the center.

43" Monster Socket Pull-Up Curl Bar

Made from 28.5MM cambered steel with extended knurling and Black E-Coat finish. Ships standard with (2) MG Black mounting sockets and (4) bright zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. Design enables close-grip and wide-grip pull-ups.

J-Cups

Monster Standard J-Cup Pair

Monster Standard J-Cup Pair

Our default J-Cup selection. Features UHMW plastic within the cup itself to protect the bar's knurling, as well on the backside and the clasp to protect uprights from scratching/chipping. 1000LB rating. 

Rackable Depth: 2.75"

Monster 1" Sandwich J-Cup Pair

Monster 1" Sandwich J-Cup Pair

The Monster Sandwich J-cup has a UHMW plastic core which offers full protection against your barbell knurling. It also has UHMW plastic on the backside to protect the rack from chipping. 1000LB rating. 

Rackable Depth: 2.5"

Monster 2" Sandwich J-Cup Pair

Monster 2" Sandwich J-Cup Pair

The side plates fit into a recessed, machined plastic core (2" wide) to prevent metal-to-metal contact. The hardware (that connects the plastic to the side plates) is also recessed, preventing the bar or a user’s hand from scraping against them. Welds are inside the side plates for a clean edge, and UHMW plastic is featured on the clasp and back plate to prevent damage to the uprights. A thin piece of rubber on the side of the clasp also softens contact between the clasp and upright when the J-Cup is swung into place. 1000LB rating. 

Rackable Depth: 2.5"

Ghost Roller J-Cup 2.0

Ghost Roller J-Cup 2.0

The Ghost Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off.

Rackable Depth: 2.875"

Safeties

Monster Pin & Pipe Safety Set

Our default safety selection. Standard pair. Pin: 1" diameter, zinc coating.Pipe: 1.5" diameter, schedule 80 pipe, black powder coat. Depths are 24", 30" and 43".

Monster Strap Safety System 2.0

3" wide reinforced nylon straps designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000LB. Notched pin design securely locks the system into place and allows for easy, quick adjustments. Depths are 24", 30" and 43".

Monster 43” Flip Down Safety

Compatible ONLY with the 43" depth RM-4 and RM-6 racks. Features UHMW plastic to proctect both the knurl of the barbell and the uprights of the rack. Finish is medium gloss black powder coat. Made from 3x3" 11 Gauge Steel.

Loading

EXPLORE MONSTER ATTACHMENTS

Recommended Products

Reviews

1 - 8 of 83 Reviews
Koko2024
Las Vegas
★★★★★
★★★★★
February 14
Big rack but still good for tight spaces
Very compact front to back but still lots of space to get all your work done.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
AllTypos
Bay Area, California
★★★★★
★★★★★
Jul 2023
Absolutely incredible
Pictures don’t accurately show how beautiful the satin clear finish is. I changed the name plate to the one used in the stainless steel RM6. If I were start my gym from scratch, I’d buy this again
Yes, I recommend this product
Helpful?
Yes · 12
No · 1
El_guapo
Conroe,TX
★★★★★
★★★★★
Mar 2023
Made in America can’t get any better
I have been a garage gym fan for years, and my first gym was built using a competitor.. in the last year I realized how important is to have a company that understands your needs, delivers quality product made in America , and resolves any issues in a quick matter looking up for the customer. After opening my packages , I was able to immediately see and appreciate the standards Rogue put in its products in addition; their customer service was top notch answering my requests , answered every question I had , and make me feel like I wasn’t building this gym on my own . I am very grateful to have an American company that builds quality products that treats me as a team member not just a customer…
Monster mass storage (almost finished )
Helpful?
Yes · 4
No · 1
Zoom
Washington State
★★★★★
★★★★★
Feb 2023
Looks great. Super quality.
All pieces arrived without issue. Assembly pretty straightforward. I love the Gunmetal Gray rack and the black fasteners.
Yes, I recommend this product
Helpful?
Yes · 3
No · 0
DallasH
Alexandria, LA
★★★★★
★★★★★
Feb 2023
The Monster rack is a true MONSTER & beautiful!!
I have been at CrossFit for almost 10 years; I needed to transition to my home gym without sacrificing anything!! In reality, the Monster RM-3 is stronger than the equipment at a professional gym! I love the 100” height for pull-ups and chin-ups. The j-hooks, The Monster land-mine, hip thruster bar, and back widow are far superior to anything I’ve used!! The fit and finish of the rack, accessories, and bolts are absolutely PERFECT!!! Not a single blemish on anything!! Rogue - you build great equipment!! Job well done!! Thank you!! Additionally, I had so much stuff in my cart a couple of pieces were incorrect, customer service reached out to notify me, got me pics and info for the correct items, all before it shipped; everything still shipped on time and correct - Emily at Rogue Customer Service was fantastic!!
Lots of pieces but easy to assemble!  Did it by myself!
My peaceful happy place! 😜
Out with the old stuff in with the BLUE (new)!
Helpful?
Yes · 8
No · 1
BananaHammock
Marin, CA
★★★★★
★★★★★
Feb 2023
It's perfect. Just buy it.
After WAY too much research I decided on this rack and I couldn't be happier. It's amazing! It is a bargain price considering its an investment to your health. The build quality is great. There's imperfections here and there, rusty spots (It's steel after all) but none of these aesthetic issue matter. Just get to work! It is the perfect size for a garage gym; the 90" height is great for pull ups. It's very STABLE and I haven't even secured it to floor yet. The assembly is incredibly simple. If you have at least 2 working neurons and you know which end of the wrench to hold it will take you about 2 hours to assemble and that's taking your time. Speaking of the wrenches, they are just OK but they only need to work once. If you have 2 big sockets it makes it easier. Also, If you don't have any friends you can definitely assemble it by yourself and then lift it up. Its "heavy duty" but not heavy enough that one person can't lift it once you're done assembling it. (I HIGHLY recommend getting the landmine attachment!)
Yes, I recommend this product
all black!
Helpful?
Yes · 7
No · 0
DakLifts
Kenai, Alaska
★★★★★
★★★★★
Jan 2023
Best Quality / Worst Compatibility
Nothing more needs to be said about the quality of Rogues power racks; however, it is very aggravating after spending several thousands of dollars in monster series equipment, a lot of their rack attachments are not compatible. I think if rogue offers a product, it should be compatible with all series of racks. But right now it seems to me if you want the most compatibility you need the monster lite series.
Yes, I recommend this product
Helpful?
Yes · 5
No · 19
Sampustea
Cape Cod, MA
★★★★★
★★★★★
Jan 2023
Best Rack Ever!
Very satisfied with the rack! Solid and looks great! Rogue makes the best racks...
Helpful?
Yes · 3
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery