Live Chat

Rogue S-2 Squat Stand

Rogue S-2 Squat Stand

More Power Rack than Squat Stand!

Availability: In stock Price Qty
Rogue S-2 Squat Stand
$425.00
Rogue S-2 Squat Stand - Set of 5
$2,175.00

Shipping Included!

Rogue S-2 Squat Stand & Bench
$655.00
Shipping Included!
Includes:
(1) S-2 Squat Stand
(1) Flat Utility Bench
Set of Safety Spotter Arms
$135.00

Ships (2) 20 in. Deep Arms
*Cannot be used on old SPX Stands*
UHMW Plastic comes attached

Rogue S-Base Floor Mounting Feet - Pair
$20.00

(2) S-Base Floor Mounting Feet

Squat Stand Wheel Bracket Set
$29.98
(1) Set of brackets

Gear Specs

Brand Rogue
Color Black
Product Weight 153 lbs.
Height 92
Foot Print 48 x 48
Steel Notes 2 x 3 11 Gauge
Other Product Specs Weight Capacity: Tested at 1,000 lbs.
Squat Stands 2x3" Steel, Pullup Bar
Made In USA Yes
Free Shipping No
3 Ships Free No

FAQs

Rogue S-2 Squat Stand

With 2x3” 11-gauge steel uprights, an adjustable fat/skinny pull-up bar, and a wide range of compatible accessories, the Rogue S-2 Squat Stand is more power rack than squat rack.

Built in Columbus, Ohio, the S-2 includes key innovations from the Rogue Infinity Series, including a unique upright/socket design, Westside hole spacing, 5/8” bolts and fasteners, and J-cups with protective UHMW plastic liners. It's a squat stand well suited to small home gyms and large-scale weight training facilities, with easy transitions from squats to bench, floor press to pull-ups, and anything in-between.

The S-2 Squat Stand’s 92” height gives you ample space for pull-ups under an 8-foot ceiling, while a compact 48x48” footprint leaves plenty of room for additions and customization. Compatible 2x3" accessories include Safety Spotter Arms , Rogue Landmines , and the Rogue Matador .

The Rogue S-2 Squat Stand and Bench ships with (1) S-2 Squat Stand and (1) Flat Utility Bench .

You can find helpful S-2 Squat Stand reviews and ratings, written by real customers, under the “Reviews” tab on this page. To compare the S-2 to other Rogue squat stands, visit the S-Series Squat Stands main page.

Rogue S-2 Squat Stand with Pull-up Bar:

  • Made in Columbus, Ohio, USA
  • Height: 92”
    • Max Pull-up Bar Height for Fat/Skinny Bar: 80.5"
    • Max Pull-up Bar Height for Single Skinny Bar: 88"
  • Foot Print: 48x48”
  • Weight: 153 lbs.
  • Weight Capacity: 1,000+ lbs
  • Steel: 2x3” 11-gauge steel tubing
  • West Side hole pattern (1” through bench and clean pull zone, 2” spacing above and below)
  • J-cups with UHMW plastic liner
  • Fat and skinny pull-up bar options (2” or 1.25”)

 

Reviews

Don't waste time researching others

Review by JT
Quality
5
This review likely not for the average visitor to Rogue's website. No powerlifting or crossfit workouts here. Simply a dad and his son equipping the garage gym. I spent way too much time researching stands vs. racks and then manufacturers. The S-2 fit on paper the specs for what we needed. Ability to handle moderate weights for 3 or our 4 major lifts (squat, bench and press). Ultimately chose the S-2, though I do think for our purposes the S-1 would have worked. I know now that simply from an engineering standpoint the attaching of the pull-up bar makes the unit even more stable. Without a doubt it will handle any weight we will throw at it. Not the cheapest out there but without hesitation I can say I do not regret the purchase. No need for customer service interaction as ordering was simple and shipping was surprisingly fast. Looking forward to purchasing accessories.
| Review for: Rogue S-2 Squat Stand

Well pleased...

Review by bricmars
Quality
5
I've been using the S-2 squat stand since August 2012, and it has exceeded my expectations. I wanted a squat rack with chin-up capabilities to complement my home gym. I built a Oly platform and placed between the floor posts, 42'' wide is a perfect distance. I'm 5'10", and I am fully suspended with doing chin-ups. Easy to assemble, takes about 30-minutes with non-power tools. I would purchase again.
| Review for: Rogue S-2 Squat Stand

No regrets

Review by Ethan
Quality
5
Just want to share my opinion.
I have the S-2 rack, spotter arms, a Rogue Bar and set of bumper plates, and the dry erase channel (for fun). I am blown away by every piece of equipment i have purchased from Rogue. If you are reading this, and on the fence about spending the money, dont think twice. You will not regret your purchase. I am 100% satisfied with my gear!
| Review for: Rogue S-2 Squat Stand

Quality, simplicity, and functionality

Review by cgh
Quality
5
I ordered a number of items from Rogue, including not only the S-2, but some bumpers, the dipping attachment, a bench, a bar, and the neutral grip (which is a beast). This review is for the S-2, but it applies to everything that I ordered. I waited to have the equipment for several weeks of use before reviewing and I can say that for someone that is often discouraged by the decline in quality and craftsmanship of most things being produced today, this is not the case with Rogue products. Not one single shred of buyer's remorse. Shipping was immediate. The materials are top notch. The welds are perfect. The finish is quality. The designs are elegant and effective in their simplicity. These products are no BS, no frills, totally functional / old-school, and a complete afront to the surfeit of $hit being produced these days.
| Review for: Rogue S-2 Squat Stand

Like a ROCK!!!

Review by Dave
Quality
5
I never leave product reviews. Until now. I've been needing a squat rack for years and I just moved into a place with enough space for a good garage gym set up. My program is primarily powerlifting with some Crossfit workouts for conditioning. At 190lb BW, I still rank as a novice in the powerlifting game (430BS/475DL/325PB/210SP) but would like to see these numbers go up quite a bit. I needed an affordable but sturdy squat rack that I could count on for life. After doing some research I settled on the S-2 due to the inclusion of the chin up bar (I opted for the single bar since I wanted it as high as possible) and the 1,000lb tested strength . The S-2 took about 20 minutes to set up and I was stunned with the solidness of this piece of equipment. I currently don't anchor the S-2 at all and I can perform K2Es, kipping pullups, etc with little to no rack movement. It also feels VERY solid even under heavy weights. It handles 350lb squats easily with no movement (tipping, swaying, rocking etc) at all. I don't feel like I have to 'baby' this rack. It can take whatever I dish out. I haven't loaded it up for heavy squats (400lb+) yet, but there is no doubt in my mind that it will still feel solid during 500-600lb squats. I will never outgrow this rack! Thank you Rogue for a great piece of equipment! Customer for life!
| Review for: Rogue S-2 Squat Stand

Rogue= Quality

Review by Brian Clarke
Quality
5
I just put this together last night, it was easy to put together and I mean that because I'm not good at building anything. The structural integrity of the S2 is above all else. If you want a quality American made equipment go Rogue!
| Review for: Rogue S-2 Squat Stand

Solid as a rock

Review by Eyegore
Quality
5
I got this today, cut it down to size with a hacksaw and a grinder (it is 2" too big for my basement, and I knew that going in). I put it together in about a 1/2 an hour. This thing is solid, the fat PU bar is FAT!, I got the Safety Spotter arms, which are heavy and well built. This rack is perfect (I was also looking at a powertec half rack, the S2 is FAR superior). The few cons: I was looking at the vertical plate storage, and I don't know if they will fit below the spotter arms (I'm short). And there are no numbers on the holes for the j-cups. That's it, and they are both minor complaints. Assembly tip- don't tighten all the bolts until it is all together, so that the stand can conform to your uneven floor.
| Review for: Rogue S-2 Squat Stand

WOW! Total Satisfaction!

Review by Maykel (Miami)
Quality
5
I cannot describe how happy I am with my purchase of the Rogue Squat Stand! As soon as I opened the boxes, I knew I had invested in pure quality. Setup was a piece of cake, and I was extremely impressed with the stability and solidness of the stand. If you cannot afford or fit a full Rack in your home gym, do not hesitate to invest in S-2 stand! Everything Rogue sells is made here in the USA, and no matter what you buy from them; you will not regret it for a moment! I am 6ft -1, and I had absolutely no issues doing pullups on the stand. I absolutely love the fat grip bar!! I love how versatile this thing is!! My friend did 600lb squats on it, and it was just begging for more. I also had a few questions, and I honestly have to say Rogue's customer service is nothing less than exellent! I am now waiting for delivery of the vertical plate storage and matador, which I highly recommend!! I am so happy! Keep it up Rogue!!!
| Review for: Rogue S-2 Squat Stand

Pictures don't do it justice!

Review by Tyler
Quality
5
I'm the type of person that likes to do tons of research before I make a bit purchase. I've been using a Marcy rack for 3+ years now and have been looking at the S-2 & R-3 for two years. I kept hesitating because I am a 6'0" guy with extra long arms & wasn't sure if the S-2 would be tall. I've been using this stand with the single pull-up bar, spotter arms, & base storage for about a month now and it is the PERFECT height for my height and low ceilings. I am madly in love with the thing. Let me say that the pictures don't do it justice. I thought that my Marcy rack was good, but this thing is just so unbelievable solid it makes the Marcy look like it's made of paper. I had to go out and buy a new wrench because the bolts are so big and sturdy on this thing and my cheap ratchet set didn't come with 1". I have to tell you, I have always been impressed with Rogue, but this thing still impressed me beyond my expectations. I will be using this thing for life. LOVE IT!
| Review for: Rogue S-2 Squat Stand

Perfect

Review by SLott
Quality
5
I ordered the stand with the single pull up bar, the bench and safety arms. Went together very easily. Great quality, and a huge improvement over the one it replaced. The single pullup bar allows you to place the bar at a height that is perfect for you. The whole thing is built to last forever. I love the solid feel of the bench. Delivery was so fast I had to scramble to get the old equipment out of my house to make room. I'm a fairly new Rogue customer, but I'm here to stay. Awesome all around.
| Review for: Rogue S-2 Squat Stand

Items 21 to 30 of 61 total

per page

Other Customers Also Viewed