Rogue Rig Shims
Rogue Rig Shims
Productspecificaties | |
| Merk | Rogue Fitness |
| Gemaakt in de VS | Ja |
| Lengte | 7" |
| Breedte | 5" |
| Hoogte | 14-AWG (5/64") of 1/4" |
| Staalgegevens | Lasergesneden staal |
| Compatibel met Infinity-serie | Ja |
| Compatibel met Monster | Ja |
| Compatibel met Monster Lite-serie | Ja |
Productbeschrijving
Featuring the same dimensions and laser-cut steel as our foot plates, Rogue Rig Shims can help compensate for uneven flooring by working as a virtual extension of an existing upright.
Meer lezen
Rogue Rig Shims
Featuring the same dimensions and laser-cut steel as our foot plates, Rogue Rig Shims can help compensate for uneven flooring by working as a virtual extension of an existing upright.
When & How to Use Rogue Rig Shims:
When setting up a rack or rig, Rogue always suggests holding off on fully tightening all hardware until the entire unit has been assembled. If you’ve followed these instructions and still find that one or more of your uprights isn’t flush with the floor, it may be because the floor itself isn’t level. Rogue Rig Shims can solve this problem by sliding securely into the gap between the floor and the bottom of the upright, stabilizing the rig in the process.
Productspecificaties
Specificaties:
- Made from Laser-Cut Steel
- Dimensions: 5" x 7"
- Available in Two Thicknesses: 14ga. (5/64”) or 1/4”
IMPORTANT: These steel shims are compatible ONLY with Rogue Infinity, Monster, or Monster Lite systems. They should not be used with the Echo line of rigs and racks. This is a bare steel product. Like all bare steel items, this product will oxidize over time if left uncoated.
Verzenden
Rogue Snelle Verzending
Via het Rogue-verzendsysteem kun je je bestelling volgen vanaf het moment dat je de bestelling plaatst tot aan het moment dat deze wordt bezorgd. Bestel nu en volg je bestelling direct.