MIL Pull-up Station
MIL Pull-up Station
Caratteristiche del prodotto | |
| Marca | Rogue Fitness |
| Colore | Nero |
| Prodotto negli Usa | SÌ |
| Peso del prodotto | 146LBS |
| Altezza | 93" |
| Foot Print | 48" x 67" |
| Informazioni sull'acciaio | 2"x3" 11 Gauge Steel |
Descrizione prodotto
The Rogue MIL Pull-Up Station is built to the required specs of the Army Combat Fitness Test’s “Leg Tuck” event, with an extended width of 62” between the two uprights to create ample operating space for any size athlete (in the Leg Tuck, the athlete uses an alternating grip, and their body is perpendicular to the pull-up bar). Because this unit also includes the same 2x3” 11-gauge steel tubing and standard single pull-up bar (1.25” diameter) as our R-Series squat racks, it can serve as a dedicated pull-up station for any traditional gym set-up, as well.
Leggi ancora
MIL Pull-up Station
MEETS THE STANDARD FOR USE IN THE NEW U.S. ARMY COMBAT FITNESS TEST (ACFT)
The Rogue MIL Pull-Up Station is built to the required specs of the Army Combat Fitness Test’s “Leg Tuck” event, with an extended width of 62” between the two uprights to create ample operating space for any size athlete (in the Leg Tuck, the athlete uses an alternating grip, and their body is perpendicular to the pull-up bar). Because this unit also includes the same 2x3” 11-gauge steel tubing and standard single pull-up bar (1.25” diameter) as our R-Series squat racks, it can serve as a dedicated pull-up station for any traditional gym set-up, as well.
The MIL Pull-Up Station has a total footprint of 48” x 67” and an upright height of 93”, with the pull-up bar position adjustable from 90” down to 86”. All required 5/8” hardware is included, as is an attachable step (connected via detent pin) that can be set at either 18” or 24” from the ground—matching the step heights on the Army’s Climbing Pods. This step also contains a large rubber insert that covers all metal edges for added safety.
The entire stand is finished in a texture black powdercoat, except for the removable step, which has an MG Rogue Red finish for stand-out visibility. The rear crossmember tube features laser-cut Rogue branding.
Please Note: The MIL Pull-up Station is not designed to be used as a squat rack. J-Cups are not included and the unit does not feature J-Cup mounting holes.
See More: Pull-Up Systems Available from Rogue
Caratteristiche del prodotto
Caratteristiche
- Made in the USA (imported rubber)
- 2x3” 11-gauge steel construction
- Unit Weight: 146 LBS
- Height: 93” (clear for minimum 8 foot ceilings)
- Foot Print: 48” x 67”
- Single Pull-Up Bar - 1.25” diameter, 62” length, adjustable height from 86” to 90”
- Black Powdercoat Finish
- Laser-Cut Rogue branding
- Attachable Step w/Detent Pin and Rubber Insert + Rogue Red finish, adjustable height from 18” to 24”
Spedizione
Spedizione veloce Rogue
Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.
Equipped for the ACFT
While the MIL Pull-Up Station can be used as a standard, dedicated pull-up stand for any gym, it’s also uniquely optimized for performing the Leg Tuck movement; Event 5 of the Army Combat Fitness Test. The extended length of the pull-up bar, at 62”, is roughly a foot longer than the bar on our standard Infinity Racks. This creates more space for performing the Leg Tuck movement, in which athletes utilize an alternating grip and position their bodies sideways / perpendicular with the bar.
Struttura Rogue di qualità
Built for stability and long-term durability, these 93” tall units are manufactured in the USA using 2x3” 11-gauge steel tubing + imported rubber for the attachable step. All required 5/8” hardware is included, and both the single pull-up bar (86” to 90” height) and step (18” to 24”) are conveniently adjustable. The stand is finished in a black powdercoat with laser-cut Rogue branding on the rear crossmember tube. The removable step, meanwhile, has an MG Rogue Red finish and a protective rubber insert for its metal edges.
