Rogue Monster Plate Storage Pin
Rogue Monster Plate Storage Pin
Mount*
Lunghezza*
Dimensione confezione*
Caratteristiche del prodotto | |
| Marca | Rogue Fitness |
| Colore | Nero |
| Prodotto negli Usa | SÌ |
| Lunghezza | 6,75" o 12,75" (lunghezza caricabile) |
| Diametro | 1.9" |
| Informazioni sull'acciaio | Componenti in metallo zincato nero lavorato a macchina |
| Altre specifiche del prodotto | Asta in plastica acetalica con anima in acciaio |
Descrizione prodotto
Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.
Leggi ancora
Rogue Monster Plate Storage Pins
Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.
The Monster Plate Storage Pin is available in two styles (Keyhole and Keyless) and two lengths (6.75” or 12.75” loadable length). All versions are intended exclusively for use with Rogue Monster Series power racks, rigs, and wall-mount units, and are NOT compatible with our Infinity or Econ lines. You can order your Monster Pins in a multitude of package options: single, pair, 4-pack, or 8-pack.
Brevettato
Caratteristiche del prodotto
Caratteristiche:
- Prodotto negli Stati Uniti
- Bumper Plate Storage Posts - Exclusively for Rogue Monster Series Racks & Rigs
- Available Individually, in Pairs, or as 4-pack or 8-pack
- Post Diameter: 1.9"
- Post Lengths: 6.75" or 12.75" (loadable length)
- 12.75” Pin Capacity: 180LB of bumpers and up to 540LB of steel plates.
- 6.75” Pin Capacity: 180LB of steel plates / Ideal for storing your change plates and smaller increments of steel.
- Machined Acetal Sheath
- Acetal Washers
- Keyhole and Keyless options
- Threaded Nut comes standard for tightening (optional Knurled Knob also available)
- Metal Finish: Proprietary Matte Black
Spedizione
Spedizione veloce Rogue
Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.
THE TWO STYLES OF MONSTER STORAGE PIN:
Keyhole Pin: Includes a specialized nub for installation into the keyholes of a Monster rack/rig. NOT compatible with standard 1” holes.
Keyless Pin: (no nub): Designed to be compatible with the keyholes AND the standard 1” holes of a Monster rack/rig.
Note: All metal parts of the post, regardless of the size and variation, are finished in Black Zinc.
Threaded Post w/ Acetal Cover
Consists of a 1" diameter threaded pin and 1.9" OD machined Acetal plastic sheath. Acetal is a high-end thermoplastic material noted for its light weight, low-friction, and wear-resistant qualities. It offers a unique combination of strength, rigidity, and dimensional stability beyond that of traditional plastic coatings, not to mention a more consistent, uniform appearance. We've also included (2) Acetal Washers that sandwich each side of the upright to keep the powder-coat protected from any damage.
Keyhole & Keyless Options
Customers can choose between our standard Keyhole Pin, which features a machined nut with a special nub designed to fit the keyhole of our Monster racks; or a Keyless variation, which is designed to fit the keyholes AND the standard 1” holes of a Monster rack. Both versions are made to ensure a tight fit that won’t allow sagging or spinning even when the post is fully loaded.
Choice of Threaded Nut or Knurled Knob
The storage pin comes standard with a machined nut that goes through the threaded end of the post, on the opposite side of the upright from where the plates are stored. Users can tighten this nut with one of our 1" Monster Wrenches (these wrenches come standard with our Monster Racks but can also be Purchased a la carte). As an alternative, customers can also opt to purchase our new Monster Knurled Knob, which enables the adjustment of the post’s height WITHOUT the need of a wrench or other tools. Available as a single or a pair, this patent pending machined knob includes an acetal insert on one side (to protect the customer’s uprights) and a knurled outside surface with a black zinc finish. It measures 2.125" in diameter, weighs 0.57 LBS, and is compatible ONLY with our 1" threaded pins (or 1" hardware).
