Monster Rack Storage Panel
Monster Rack Storage Panel
Monster Rack Storage Panel AccessoriAvailable Options (2)
Caratteristiche del prodotto | |
| Marca | Rogue Fitness |
| Prodotto negli Usa | SÌ |
| Lunghezza | 24" / 30" / 43" |
| Larghezza | 3" (depth) |
| Altezza | 12" |
| Informazioni sull'acciaio | Pannello in acciaio calibro 11 |
| Altre specifiche del prodotto | Non utilizzabile come traversa strutturale. Accessori non inclusi |
Descrizione prodotto
A great way to add versatile storage capacity to any existing Monster Series rack or rig, our 11-gauge steel Rack Storage Panels include 5/16” thick endplates and a set of (4) 1” bolt assemblies for easy installation (a separate Monster Lite version). There are three different lengths to choose from—24”, 30” and 43”— meaning you can mount a panel between the two back uprights of your rack and/or between two side uprights, depending on the depth of the unit. Customers can also select a hardware finish of bright zinc or black zinc to match their existing set-up.
Leggi ancora
RACK STORAGE PANELS - MONSTER
A great way to add versatile storage capacity to any existing Monster Series rack or rig, our 11-gauge steel Rack Storage Panels include 5/16” thick endplates and a set of (4) 1” bolt assemblies for easy installation (a separate Monster Lite version). There are three different lengths to choose from—24”, 30” and 43”— meaning you can mount a panel between the two back uprights of your rack and/or between two side uprights, depending on the depth of the unit. Customers can also select a hardware finish of bright zinc or black zinc to match their existing set-up.
All of our Rack Storage Panels are manufactured in the USA from US steel, with laser-cut Rogue branding and a medium-gloss black powder coat finish. The center section of each panel features a row of tear-drop Monster keyholes (spaced vertically and horizontally 2” on center), while the top and bottom portions include standard 1” holes (spaced 2” on center horizontally). We’ve left recesses in the back of the panel for tightening mounting hardware. Please Note: Customers who have a rack pushed all the way against a wall may need to pull the rack out in order to access and tighten the panels with a wrench.
*IMPORTANT: These Storage Panels should NOT be used in place of any structural crossmember and should only be used in addition to a unit’s existing crossmembers. The panels are also optimized for use with bolt-together Monster units and CANNOT be installed between the front and back uprights of an RM-3 Fortis or RM-4 Fortis Rack (this is due to allowable length tolerances in the welded side panels of these racks). Fortis owners CAN use the 43” storage panel as an option between the rack’s two side panels.
Whether you install one panel or several, the space efficient design offers compatibility with various standard Monster accessories (including the Monster Plate Storage Pin and Monster Attachment Post,) as well the a la carte options below.
Brevettato
Caratteristiche del prodotto
Caratteristiche:
- Made in the USA - 11-gauge Steel
- Design in attesa di brevetto
- Venduto singolarmente
- Compatible with Monster Series Racks and Rigs
- Compatible with Monster Accessories (not included)
- Three Length Options: 24”, 30”, 43”
- Larghezza: 3"
- Height: 12”
- Laser-cut Rogue branding
- MG Black Powder Coat finish
- 5/16” thick endplates
- (4) 1” Bolt Assemblies Included
- Hardware Finish Options: Bright Zinc or Black Zinc
Spedizione
Spedizione veloce Rogue
Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.
KEY FEATURES OF ROGUE’S RACK STORAGE PANELS
Customize Your Attachments
Our Monster Rack Storage Panels provide another way to fully utilize an existing Monster rack or rig, as the upright-mounted panels are compatible with a wide array of special a la carte attachments, as well as existing 1” Monster accessories such as the Monster Plate Storage Pin and Monster Attachment Post. The panel’s combination of standard and keyhole-style holes offer loads of additional possibilities for true customization.
3 Size Options
As another means of adding functional versatility, we’re offering the Rack Storage Panels in three different lengths: 24”, 30”, and 43”. This allows gym owners to attach panels across the two back uprights of a Monster rack (43”) and/or across two side uprights in a 24” or 30” depth rack. All sizes of the panel measure the same 3” in depth and 12” in height.
Important: The panels may NOT be compatible between the front and back uprights of our welded Monster racks: the RM-3 Fortis and RM-4 Fortis. The 43” option CAN be used, however, between the side panels of a Fortis Rack.
Struttura Rogue di qualità
Each panel is manufactured in the USA from 11-gauge US Steel with laser-cut Rogue branding and an MG Black powder coat finish. Recesses in the back of the panel are included for tightening the mounting hardware, which can be selected in a bright zinc or proprietary matte black finish to match your existing rack/rig.
Important: Not intended use as a structural crossmember.
Multi-Panel Setups
Because it measures 12” in height, it’s easy to sequence multiple Rack Storage Panels flush against one another on one side of a rack, maximizing the storage capabilities of the unit. Gym owners can also purchase multiple panels for attaching to different sides of the same rack/rig (this may require selecting different panel lengths).
Loads of Gear Within Arm's Reach
The unique design of the Rack Storage Panel offers a space efficient means for storing everything from change plates and OSO collars to weightlifting belts, resistance bands, speed ropes, and a whole assortment of other small gear. It’s a new addition to the wider family of Rogue storage equipment.
IMPORTANT: Rack Storage Panels are NOT designed to be a replacement for a rack’s structural crossmember. They should only be used in addition to the standard crossmembers included with a rack/rig.
