Rogue Pyrros Bar - 25MM
Rogue Pyrros Bar - 25MM
Descrizione prodotto
Combining a stainless steel, 200,000 PSI tensile strength shaft with chrome sleeves and quality needle bearings, the 25MM Rogue Pyrros Women’s Olympic WL Bar ranks among the best in the industry for feel, durability, and performance. As no coincidence, it has also now been officially recognized as an IWF Certified women’s barbell; an achievement commemorated with a new Cerakote IWF logo on the shaft and IWF branding within the endcaps.
Leggi ancora
Rogue Pyrros Bar Stainless Steel Women’s Olympic WL Bar
Certified by the International Weightlifting Federation
Rogue spent months researching and testing high strength stainless steel alloys, culminating in the creation of the world-record setting Elephant Bar used at the 2016 Arnold Strongman Classic. This bar handled one of the greatest loads in history due to the length of the shaft and sleeves as well as the use of 1,000LB of 2" thick steel plates. That very same steel went into making our 25MM Pyrros Stainless Steel Women's Olympic Bar, and it's a difference you can instantly feel.
Rogue also offers the Women's Olympic WL Bar in Bright Zinc or Polished Chrome finish, available here.
Combining a stainless steel, 200,000 PSI tensile strength shaft with chrome sleeves and quality needle bearings, the 25MM Rogue Pyrros Women’s Olympic WL Bar ranks among the best in the industry for feel, durability, and performance. As no coincidence, it has also now been officially recognized as an IWF Certified women’s barbell; an achievement commemorated with a new Cerakote IWF logo on the shaft and IWF branding within the endcaps.
Each 15KG bar is machined and assembled in Columbus, OH, and includes an exclusive Rogue knurl pattern that's precision-cut for a firm grip without the sharpness or abrasiveness of many import bars.
Note on Stainless Steel: Barbells made from raw steel are not plated and therefore marks from the machining process may be visible.
Caratteristiche del prodotto
Caratteristiche:
- IWF Certified
- Prodotto negli Stati Uniti
- Women’s Bearing Bar (International Weightlifting Federation specifications)
- 5 Needle Bearings per sleeve
- Olympic Knurl Marks (no center knurl) in non-aggressive pattern
- Tensile Strength: 200,000 PSI
- Dome-tag Endcaps
Spedizione
Spedizione veloce Rogue
Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.
Caratteristiche del prodotto | |
| Marca | Rogue Fitness |
| Garanzia | Garanzia di costruzione* |
| Prodotto negli Usa | SÌ |
| Lunghezza perno di carico | 12.50" |
| Lunghezza bilanciere | 79.14" |
| Diametro | 25MM |
| F Rating™ | F8-R |
| Tipo di bilanciere | Bilancieri da donna |
| Uso del bilanciere | Sollevamento pesi olimpico |
| Cuscinetto/Boccola | Cuscinetto |
| Peso del bilanciere | 15KG |
| Zigrinatura | Olimpico |
| Zigrinatura centrale | NO |
| Knurl Mark | Olimpico |
| Rivestimento del bilanciere | Nessuno - Acciaio inossidabile |
| Rivestimento perno di carico | Cromato |
| Resistenza alla trazione | 200.000 PSI |
The Difference of Stainless Steel
The Pyrros Oly Bar is made from a high-strength, stainless steel alloy, producing a shaft with a minimum tensile strength of 200,000 PSI. Selected for its optimal "whip" and "flex". With no plating, the knurl is left exactly how we machined it, providing a natural feel that is less reliant on chalk, with better corrosion resistance than bare steel. Please Note: Rogue recommends using a synthetic bristle brush, NOT a steel brush, to clean a stainless steel shaft. Steel on steel can cause rusting over time. See more tips here: Bar Care & Maintenance.
IWF Certified
In the strength world, IWF approval is akin to a restaurant earning its Michelin stars, so this recognition is a critical statement on the extra level of attention that goes in to fine-tuning each Pyrros Bar. After machining, the bar’s shaft is again tested and straightened in our Barbell Assembly Department, and the components are weighed together. Once the weight standard of +15 grams/-7.5 grams is met, the bar is assembled by hand followed by an individual test for straightness and reliable spin.
Precision Machining
Every Pyrros Bar is machined in Columbus, Ohio, on new Haas machines that are built in the USA. Each shaft is ground and polished prior to machining and individually tested and straightened to within 0.015” (0.38MM). Each sleeve is machined to our exacting standards from a single piece of steel. After machining, all parts are gauged to ensure optimum performance.
A LEGEND'S INPUT
A national hero in Greece, Pyrros Dimas owns three World Weightlifting Championships along with three gold medals from the 1992, 1996, and 2000 Olympic Games. He has few equals in the sport, so designing a barbell up to his standards was both a privilege and a great challenge. The bar includes an original end-cap design that pays homage to Pyrros’s Greek heritage and Olympic triumphs.
A New Addition to Your Rogue Arsenal
Rogue offers a wide range of additional equipment and accessories to potentially combine with your Pyrros Bar. This includes our Competition Bumper Plates, Competition Collars, and exclusive barbell storage options.
F SCALE™
The F Scale™ is a durability scale for barbells based on functional testing at stresses similar to what barbells experience when being dropped from overhead. Bars that have been treated with Rogue Work Hardening (RWH™) are designated by having an R in their F Rating™. For more information on F Scale™ click here.
OXIDATION RATE
La resistenza di un bilanciere all'ossidazione dipende dal tipo di acciaio e dal rivestimento. I bilancieri classificati all'estremità inferiore dello spettro richiederanno più cura e manutenzione, per preservare il loro aspetto, rispetto ai bilancieri all'estremità superiore dello spettro.
