Rogue RML-390BT Power Rack

Rogue RML-390BT Power Rack
Profondità rack*
Rogue RML-390BT Power Rack AccessoriAvailable Options (6)
Caratteristiche del prodotto | |
Marca | Rogue Fitness |
Colore | Nero |
Prodotto negli Usa | SÌ |
Peso del prodotto | 265 libbre |
Lunghezza | 30" |
Larghezza | 49" |
Altezza | 90 3/8" |
Foot Print | 34" x 53" |
Informazioni sull'acciaio | Acciaio calibro 11 da 3 x 3" |
Altre specifiche del prodotto | Include (1) coppia di Jcups Monster Lite, (1) sistema di sicurezza Pin/Pipe e (4) pioli per elastici |
Descrizione prodotto
Affordable Shipping, Easy Assembly, No Limitations
The RML-390BT is the bolt-together version of the Rogue's Monster Lite RML-3 Power Rack. Like the standard model, this unit is manufactured in Columbus, Ohio, and updates a classic Westside power cage design with 3x3" 11-gauge steel. The bolt-together unit may allow for the easier transport of individual components and some additional custom assembly options.
Leggi ancora
RML-390BT Monster Lite Bolt Together Power Rack
Affordable Shipping, Easy Assembly, No Limitations
The RML-390BT is the bolt-together version of the Rogue's Monster Lite RML-3 Power Rack. Like the standard model, this unit is manufactured in Columbus, Ohio, and updates a classic Westside power cage design with 3x3" 11-gauge steel. The bolt-together unit may allow for the easier transport of individual components and some additional custom assembly options.
Creating just a 34” x 53” footprint, the RML-390BT is an all-in-one power rack that can improve the efficiency of a small garage gym or major weight training center. With 5/8” hardware and Westside hole spacing, it also provides an appealing middle ground between the Rogue Monster and Rogue Infinity Series power racks. Easy to set-up and install out the box, this rack comes standard with a pair of Monster Lite J-cups, a pin/pipe safety set, four band pegs, and a 43” Fat/Skinny Pull-Up Bar.
Caratteristiche del prodotto
RML-390BT Monster Lite Bolt-Together Power Rack Specifications:
- Prodotto negli Stati Uniti
- Uprights: 90” tall, 3x3” 11-Gauge Steel
- 5/8” Bolts and Fasteners
- West Side Hole Spacing: 1” through bench and clean pull zone, 2” spacing above and below
- (1) Pair of Monster Lite J-Cups with UHMW plastic inserts
- (1) Set of Pin/Pipe Safeties for Squats, Bench & Rack Pulls from any height
- (4) Band Pegs for additional resistance workouts
- (1) 43” Fat/Skinny Pull-Up Bar
- Important: Unit Must Be Bolted to Floor
Spedizione
Spedizione veloce Rogue
Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.