Rogue RML-690 Power Rack 3.0

★★★★★
★★★★★
4.9
25 Reviews
Made in U.S.A.

Rogue RML-690 Power Rack 3.0

★★★★★
★★★★★
4.9
25 Reviews
Made in U.S.A.
Rogue RML-690 Power Rack 3.0
€ 2.368,82
Ships in 4-6 Weeks

Kleur (11)*Satin Black

Rack Height*

Upright Type*

Rack Depth*

Hardware Finish:

Front Pull-up Bar: (8)X-431 Single 1.25" Pull-up Bar

Rear Crossmember (3)Monster Lite 3.0 43" Nameplate Crossmember (+€ 82,28)

J-Cup: (4)Monster Lite J-Cup Pair - Standard

Safeties: (3)43" Infinity/ML Pin & Pipe Safety System - Black Zinc (+€ 87,12)

Plate Storage Pins: (5)4 Long / 4 Short - Black Zinc (+€ 242,00)

Band Pegs: (3)None

Rogue RML-690 Power Rack 3.0 Accessoires
Available Options (2)

SAML-24 Monster Lite Safety Spotter Arms (Pair)
SAML-24 Monster Lite Safety Spotter Arms (Pair)See Details
€ 242,00
Concrete Anchor Kit
Concrete Anchor KitSee Details
€ 32,67

Productspecificaties

MerkRogue Fitness
Gemaakt in de VSJa
Gewicht530LB
Lengte76"
Breedte49"
Hoogte90.375"
Vloerafmetingen80" x 53"
Staalgegevens3x3" 11 gauge staal, en de Westside-gatenverdeling
Andere kenmerkenInclusief (1) 43 "Balk en (1) 43 "Single Skinny Pull-up Bar
Product Description

Het RML-690 Monster Lite Rack is oorspronkelijk ontworpen om de robuuste 3x3" stalen constructie van 11 gauge van het RM-6 Monster Rack te combineren met de 5/8" hardware van de Infinity R-6 . De nieuwste versie (3.0) tilt dit hybride ontwerp naar een hoger niveau en biedt een breed scala aan aangepaste kleurafwerkingen, een boutconstructie voor eenvoudige verzending en montage, en meer veelzijdigheid.

Read More

Rogue RML-690 Power Rack 3.0

Het RML-690 Monster Lite Rack is oorspronkelijk ontworpen om de robuuste 3x3" stalen constructie van 11 gauge van het RM-6 Monster Rack te combineren met de 5/8" hardware van de Infinity 6 . De nieuwste versie (3.0) tilt dit hybride ontwerp naar een hoger niveau en biedt een breed scala aan aangepaste kleurafwerkingen, een ontwerp met boutverbindingen voor eenvoudige verzending en montage, en meer veelzijdigheid

COMPACT ONTWERP, MAXIMALE FUNCTIONALITEIT

De RML-690, geproduceerd in Columbus, Ohio, heeft staanders van 203 of 229 cm hoog met lasergesneden Westside-gatafstand (2,5 cm door de bank en de clean pull-zone, 5 cm erboven en eronder). Verkrijgbaar in een binnendiepte van 61 cm, 76 cm en 109 cm, met extra staanders aan de achterkant voor het opbergen van de schijven, is de RML-690 geschikt voor elke trainingsruimte, van garages of thuisgyms tot grote trainingsfaciliteiten

ROGUE MONSTER LITE-SERIE

Het ecosysteem van de Rogue Monster Lite Series biedt talloze mogelijkheden voor maatwerk, waaronder J-cups, safeties, kabelsystemen en opbergmogelijkheden. Alle bevestigingen en accessoires zijn ontworpen om naadloos te integreren met de RML-690, waardoor je de vrijheid
om je rack aan te passen aan je veranderende trainingsbehoeften.

GEBOUWD OM LANG MEE TE GAAN

De RML-690 onderscheidt zich door zijn duurzaamheid, veelzijdigheid en compacte ontwerp, waardoor het een betrouwbare keuze is voor zowel homegyms als professionele sportscholen. Of het nu het middelpunt van een garage is of een dynamische toevoeging aan een trainingsfaciliteit voor studenten, professionals militairen, dit rack is gebouwd om te presteren en lang mee te gaan.
als
Rogue-racks wordt het gedekt door de levenslange garantie van Rogue.

Belangrijk: Installatie moet worden vastgeschroefd aan de vloer.

Opmerking: De Satin Clear-afwerking is een transparante afwerking, wat betekent dat eventuele oneffenheden of vlekken van het productieproces nog steeds zichtbaar zullen zijn in het staal. Roestvrijstalen rekken maken gebruik van ruwe stalen onderdelen en kunnen kleine onvolkomenheden vertonen door lasersnijden en lassen.

Bekijk meer: de volledige Rogue Monster Lite-serie rekken

Productspecificaties

Specifications

  • Made in the USA
  • Aangepaste Rogue Semi-Gloss Kleur of Textuur Poedercoat Afwerking
  • Zwarte of heldere zinken 5/8” bouten en bevestigingsmiddelen
  • 3x3” 11-gauge staal - 80,375" of 90,375" hoogte
  • Voetafdruk: 61"-80" x 53"
  • West Side-gatenverdeling: de afstand tussen de gaten bedraagt 1” bij het gedeelte voor bankdrukken en cleanpulls en daarboven en onder 2”
  • Gaten in boven- en onderkant van dwarsbalken voor Slinger-compatibiliteit
  • Keuze uit staanders met of zonder lasergesneden nummering
  • Belangrijk: Het apparaat moet met bouten aan de vloer worden bevestigd.

Belangrijkste kenmerken van de RML-690 Power Rack 3.0

Exclusive Custom Color Finish Options
1

Exclusieve, op maat gemaakte kleurafwerkingsopties

Het Rogue RML-690 3.0 rack is verkrijgbaar in een breed scala aan semi-glanzende kleuren en structuurpoedercoatings. Maak een persoonlijk statement of combineer je powerrack met de kleuren van een team, school of bedrijf.

Quality Rogue Construction
2

Quality Rogue Construction

De RML-690 maakt gebruik van robuuste 3x3" stalen staanders van 11 gauge met 5/8" diameter SAE klasse 5 boutbevestigingen. Lasergesneden gaten zijn geplaatst in het klassieke Westside-patroon, met gaten op een afstand van 1" tussen de werkbank en de trekzone, en 2" in de rest van de staanders om uw bevestigingen nauwkeurig af te stellen. Let op: Het apparaat dient met bouten aan de vloer te worden bevestigd. Bevestigingsmateriaal voor de vloer is niet inbegrepen.

Monster Lite Ecosystem
3

Monster Lite Ecosysteem

Vul je trainingsruimte volledig aan met een stang, bank, schijven of een reeks compatibele tools en accessoires die speciaal zijn ontworpen voor de Rogue Monster Lite Series. Versie 3.0 is speciaal ontworpen voor een betere compatibiliteit met het lat-pulldown Slinger-systeem, omdat er nu gaten in de boven- en onderkant van de dwarsbalken zitten zodat de kabel er vrij doorheen kan.

Recommended Products

Reviews

1 - 8 of 25 Reviews
Nathan C
Spanish Fort, AL
★★★★★
★★★★★
3 weeks ago
Awesome Piece of Equipment
My wife and I opted to get the Monster Lite 690 Rack setup and have no complaints. We wanted to buy once and cry once, and purchase a top-of-the-line product that could be trusted. We expect this to last quite a while. While it is expensive up front, it is more enjoyable to lift on a premium setup and will undoubtedly put us in a better health position going forward, which will save in the long run. The fit and finish were excellent, and not a single bolt was missing. I assembled this by myself. If you've ever worked with any type of tools or assembled furniture, etc., there is nothing to it...just take your time and follow the directions. Once you get the sides built (snugged up, but not fully tightened on the bolts), the only slightly dicey part was setting each side upright and balancing them (they'll stand up on their own) carefully avoiding bumping either side with the crossmember as it we being put into place. As mentioned, the fit and finish were superb, so I simply measured slightly more than the crossmember width of 43" and squared it up, leaving a slight gap so I could pop a bolt through on one side temporarily and the do the same on the other side, leaving a slight bit of play to not inadvertently knock down the other side with the crossmember while setting it. Then flip it up and square up the base and tighten it up. Once that is done, you're home free. I didn't time the setup, but would estimate it took roughly 6-7 hrs doing it solo start to finish, including unboxings and organizing parts. And my forearms were sore for 4-5 days afterwards from all the ratcheting. I opted for the biggest version to allow for the most room inside the cage. I also got 2 extra crossmembers/stabilizers, which I would recommend. It felt adequate the way it came, but once I attached the extra crossmembers this thing was rock solid with no need to bolt down. There's plenty of room for attachments. We added a dumbbell rack, matador, GHD, wall ball setup, and a landmine attachment for now and have plenty of variety as far as exercises that can be done utilizing just the rack portion alone, much less free weights outside of the cage. Lastly, I have to give a shoutout to R&L Carriers. They called and arranged the date of delivery and there was no timeslot crap. The guy said he'd be there at a certain time and that's when he showed up. He was courteous and had an electric pallet jack which was able to bring the entire oversized pallet from the road right up the driveway to my garage door, which save me from having to bring each box up the driveway.
Yes, I recommend this product
Originally posted on roguefitness.com
Thunder_Junk
Las Vegas
★★★★★
★★★★★
Jun 2024
Best Power Rack I've ever used.
This has got to be the best power rack I've ever used.  The 690 model has plenty of walk-out room for squats.  I highly recommend buying this with numbers, eliminating guesswork when adjusting J-hooks or straps. It comes with 6 weight standards and UHMW padded j-hooks so you don't destroy your knurling on your barbells. 
Yes, I recommend this product
Originally posted on roguefitness.com
Matty_L
★★★★★
★★★★★
Feb 2024
Unleashing Potential: ROGUE RML-690C Power Rack
From the moment I assembled the RML-690C in my garage gym, I knew my workouts were about to hit a new level of intensity. This beast isn’t just a piece of equipment; it’s a cornerstone for anyone serious about lifting. Build Quality and Design: Robust doesn’t even begin to describe it. The RML-690C’s American-made steel construction exudes durability and stability, no matter how heavy I go. Its custom color finish isn’t just about looks; it’s about making a statement. Functionality: Versatility is the name of the game. With a pull-up bar, safety straps, and ample plate storage, it’s like having a professional gym at home. Adjustability is a breeze, making it perfect for squats, bench presses, and everything in between. Experience: Each session feels safer and more efficient. The rack’s stability gives me the confidence to push my limits, and the setup options keep my workouts diverse and challenging. Final Thoughts: The ROGUE RML-690C Power Rack 3.0 is more than an investment in your fitness journey; it’s a commitment to excellence. Whether you’re a seasoned lifter or just starting, this rack will elevate your home gym experience. The only thing I wish I had was an additional stabilizer kit to add to the bottom rear of the machine, I added one to the top.
Yes, I recommend this product
Originally posted on roguefitness.com
Mike D10
NEWBURY PARK, CA
★★★★★
★★★★★
Feb 2024
More than enough!
Unbelievably stout and tough squat rack. I ordered the forward addition for plate storage, but it may not be necessary depending on your setup. There is more than enough room on the rack, itself, to secure the plate holders (if they can be bought separately). The rack is sturdy enough to not need the front addition for stability and tip prevention--which was another concern of mine. ***Pay attention to the height, as I barely got this in my garage below an exposed footer that runs the width of the space. 100% satisfied with the rack. Rogue wins again!
Yes, I recommend this product
Originally posted on roguefitness.com
Old Guy 40s
Minneapolis
★★★★★
★★★★★
Jan 2024
New/used Rack
I just picked up a used RML-690c rack and it’s very impressive. It was easy to re-assemble without directions.
Yes, I recommend this product
Originally posted on roguefitness.com
Ed Q
Aurora, IL
★★★★★
★★★★★
Oct 2023
Rock solid rack
Just added this to the garage gym, and it it the perfect center-piece to the gym.
Yes, I recommend this product
Originally posted on roguefitness.com
Remko_Hermans
Netherlands
★★★★★
★★★★★
Feb 2023
Still waiting for the nuts and washers
I ordered the rig about two months ago. But a with to little bolts and no washers and nuts. I contacten Rogue, and they have send over the bolts but no nuts and washers. I've asked for this again but havn't got a reply jet. So we couldn't proparly use the rig jet.
Helpful?
Ja · 49
Nee · 0

Response from Rogue Fitness:

Feb 2023
We're very sorry to hear your Rack arrived missing some hardware. Our team is gathering these pieces now and getting them to you ASAP.
Stateoforange
Corvallis, Oregon
★★★★★
★★★★★
Jan 2022
The Best out there
This Rogue Rack is bulletproof and built to last a lifetime. I have customized mine a bit and I’m super happy with it. My son and I are grateful to have it.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery