Rogue Artillery Mug & Anvil







Rogue Artillery Mug & Anvil
Opties (2)*Rogue 20KG Artillery Mug with Anvil Set (+€ 157,30)
Productbeschrijving
We sold out, if you purchased the Artillery Shell Mug it will be 1/400 manufactured.
Limited time to get the Rogue Artillery MUG/ANVIL that we built for the Rogue Athletes over the holidays.
When we were designing the Rogue Artillery Mug/Anvil, we wanted to make sure that it was over the top. Once the first mug was complete, we realized that we had met our goal. The mug is over the top, actually way over the top. The mug weighs 10KG and the Anvil weighs an additional 10KG. This isn’t just a novelty piece. With the mug’s 22 oz/650 mL capacity and food safe stainless steel construction, it can be used for drinking… If you are strong enough.
Meer lezen
Rogue Artillery Mug & Anvil - SOLD OUT
We sold out, if you purchased the Artillery Shell Mug it will be 1/400 manufactured.
Limited time to get the Rogue Artillery MUG/ANVIL that we built for the Rogue Athletes over the holidays.
When we were designing the Rogue Artillery Mug/Anvil, we wanted to make sure that it was over the top. Once the first mug was complete, we realized that we had met our goal. The mug is over the top, actually way over the top. The mug weighs 10KG and the Anvil weighs an additional 10KG. This isn’t just a novelty piece. With the mug’s 22 oz/650 mL capacity and food safe stainless steel construction, it can be used for drinking… If you are strong enough.
The mug starts out as a 21KG/46LB solid round block of stainless steel. It is drilled in a lathe to create the precision machined cavity, then turned down to the final tapered shape with a contoured rim for easy drinking. Once fully machined, we TIG weld the laser cut and tumbled stainless steel handle supports. The anvil begins with a 18KG/40LB piece of stainless steel that we turn down into the grip challenging tapered shape with a mating feature for the mug. Next the Rogue International logo is added to the mug and the 10 KG weight marker is added to both pieces with Cerakote in our Zeus Custom Department. The 5” long, 32 mm, stainless steel handles are machined in house with an Ohio knurl and are installed onto the mug using ⅝” stainless steel bolts.
Including the handle, it takes nearly 41KG/90LBS of stainless steel to yield the 20KG/44LB set. With close to $400 in materials, over an hour and a half of machining time, and another hour of welding, Cerakoting, building and packaging, we decided to sell these as a limited run at our cost so they would stay within reach of as many people as possible.
Wash by hand using lukewarm water and dish detergent. Avoid the use of abrasive pads as this could cause surface scratches. Don’t use a dishwasher to clean your mug and anvil. It is not safe for your mug or your dishwasher.

Grondstoffen
The mug base begins with a 21KG/46LB solid round piece of stainless steel. The anvil section begins with a 18KG/40LB piece of stainless steel.

Verspanen
There is over an hour and a half of machining time in each mug/anvil set.
Productspecificaties
Specifications:
- Available as Artillery Mug & Anvil or Artillery Mug Only
- Machined in Columbus, Ohio
- Mug Capacity: 22oz
- 20KG Total Weight - Mug & Anvil
- 10KG Mug: Food Safe 304 Stainless Steel
- 10KG Anvil Insert: 303 Stainless Steel
- 32mm Diameter Knurled Handle - Stainless Steel
- Height: 8” Mug Only / 13” with Anvil
- Rogue Fitness International branding
- Flat Machined Base
The mug and anvil are hand wash only
Verzenden
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Productspecificaties | |
Gemaakt in de VS | Ja |
Gewicht | Totaalgewicht 20 kg: mok en aambeeld |
Hoogte | Alleen mok 8"/mok met aambeeld 13" |
Materiaaltype | Roestvrij staal |
Diameter handvat | 32MM |
Rogue-sporters met hun artilleriemokken (gevormd als granaathuls):

Productie van de mok van Rogue in de vorm van een granaathuls:
