Rogue TB-1 Trap Bar 2.0

★★★★★
★★★★★
4.6
45 reviews
Gemaakt in de VS.

Rogue TB-1 Trap Bar 2.0

★★★★★
★★★★★
4.6
45 reviews
Gemaakt in de VS.
€ 366,63
Excl. btw
€ 303,00

Productspecificaties

MerkRogue Fitness
KleurZwart
Gemaakt in de VSJa
Gewicht60LB (+/- 2LB)
Lengte89"
Breedte28.5"
Hoogte3"
Diameter1.34" (Handvaten) | 1.91" (Sleeves)
StaalgegevensVierkante buis van 1,5" x 1,5"
Andere kenmerkenGekartelde grepen
16" Laadbare Sleeve ruimte
Geschikt voorSpecialistisch
Productbeschrijving

Version 2.0 of the Rogue TB-1 Trap Bar features the same general design and dimensions of the original, but with an updated, precision sleeve construction that reduces the starting weight of the bar by more than 25 percent. This makes the TB-1 easier to maneuver without limiting its effectiveness. Simply put, if you want to lift massive weight, this tool still belongs in your arsenal.

Meer lezen

Rogue TB-1 Trap Bar 2.0

Version 2.0 of the Rogue TB-1 Trap Bar features the same general design and dimensions of the original, but with an updated, precision sleeve construction that reduces the starting weight of the bar by more than 25 percent. This makes the TB-1 easier to maneuver without limiting its effectiveness. Simply put, if you want to lift massive weight, this tool still belongs in your arsenal.

The Trap Bar’s hexagonal design and knurled, neutral grip handles make it optimized for performing deadlifts that put less stress on the lumbar spine—since the load is centered and not off axis like a traditional deadlift. This same benefit makes the TB-1 2.0 a useful specialty bar for beginners, as well as athletes dealing with nagging back issues or rehabbing from other injuries.

We manufacture the TB-1 in Columbus, OH, and it's fully compatible with standard Oly plates.

Approved for the new Army Combat Fitness Test (ACFT)

This product has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that’s replacing the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

IMPORTANT: Some standard barbell collars may not work on this specialty bar. We recommend using Axle Collars with this barbell.

*PLEASE NOTE: Because the TB-1 Trap Bar 2.0 is finished in our Rogue signature black powder coat, any metal-to-metal contact with the coated sleeves (such as adding and/or removing plates) may cause wear on the finish over time.


Gepatenteerd

Productspecificaties

Specificaties

  • Neutral Grip Handles, Spaced 25” on center with easy-grip knurling, 1.34" diameter
  • Newly Redesigned Olympic Sleeves: Schedule 80 with Welded Caps, 1.91” diameter
  • 16" Loadable sleeve space
  • Finish: Signature black powder coat
  • Weight: 58LB (unloaded)
Verzenden

Rogue Snelle Verzending

Via het Rogue-verzendsysteem kun je je bestelling volgen vanaf het moment dat je de bestelling plaatst tot aan het moment dat deze wordt bezorgd. Bestel nu en volg je bestelling direct.

Vaak samen gekocht

Loading
Rogue TB-1 Trap Bar 2.0
€ 366,63
Excl. btw
€ 303,00
Loading
Rogue HG 2.0 Axle Collars
€ 43,56
Excl. btw
€ 36,00

Prijs voor beide artikelen

Totaalprijs
€ 410,19

Axle Collars Compatible with This Specialty Barbell:

Aanbevolen producten

reviews

1 - 8 van 45 reviews
Tom from FL
Florida
★★★★★
★★★★★
May 29
Nice knurling, terrible powder coat
Had this thing for prob 6 months now, it’s still leaving powder coat on my floor and clothes. Not one to complain, but in this case the powder coat just keeps peeling. I have an Elite FTS swiss bar, had it several years, not nearly the same issue. Knurl is great, love using it, but have a broom handy
Oorspronkelijk gepost op roguefitness.com
Kuba
★★★★★
★★★★★
May 15
American made mediocrity
I like the design, but built quality is not what I expect for the money. For example, look at the end of the bar. Finished quite poorly and its surface is not flat at all (and it's not the matter of shipping, because the package was intact). I don't care if it's american made when it's made like this. I have heard that Rogue quality had declined over the past years due to scaling up. Unfortunately that is true. I have bought a couple of other products at the same time (paid around 5000 EUR) and almost everything has more or less annoying defects.
Nuttig?
Ja · 0
Nee · 0

Reactie van Rogue Fitness:

May 16
We sincerely apologize if any of the items you received do not meet our first quality standards. We have reached out via email to review and make this right.
50yearoldJimC
Washington, DC
★★★★★
★★★★★
January 16
Highly Recommend
Love this bar. I will mention that i was shocked at how heavy it is. I didn’t pay too much attention when i ordered it but it is a beast getting in and out of the holder. It is also pretty long and sometimes i accidentally hit my 8’ garage ceiling when putting it in or out. But will all that said, i was always a big straight bar deadlift guy and this has changed my mind. I’m 50 y/o and worried more and more about injury when doing heavy weight. The TB1 really works both the hamstrings and the quads equally. I wish i would of bought it sooner.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
Autumn Moody
Idaho
★★★★★
★★★★★
Jun 2024
Hex bar
Bars is super sturdy and good enough for my lifting needs. Plates did scratch the metal due to sliding on and off, but doesn't affect the quality of metal.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
chiefb711
Fayetteville, NC
★★★★★
★★★★★
Jun 2024
Great overall!
Aggressive grip, nice wide stance, also great to not have additional grips in the way. Sleeves are a bit small for normal clamp collars.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
Alejandro D
Phoenix, AZ
★★★★★
★★★★★
Apr 2024
Great bar but collars don’t fit
Love the bar, very sturdy and looks great. The only issue is I ordered a pair of collars as well (Rogue USA Aluminum collars - magnetic) and they don’t fit. The collar is to loose and causes the weights to slip during exercises. A little disappointing
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com

Reactie van Rogue Fitness:

Apr 2024
Thanks for leaving a review on the TB-1! Some standard barbell collars may not work on this specialty bar. We recommend using Axle Collars with this barbell.
Brad G
Lowell, MA
★★★★★
★★★★★
Feb 2024
Well worth it!
This trap bar is the real deal - solid construction and I'm not worried about beating it up one bit. The only minor downfall is that the powder coat makes it difficult to pull the boneyard plates off, but it's nothing that can't be overcome. Looking forward to my next Rogue purchase. Love that you guys stick to the made in USA roots.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
J Nate
Idaho
★★★★★
★★★★★
Dec 2023
Rock solid
Excellent trap bar. Really beefy and stout. Great knurling on the handles. A few reviews have mentioned standard collars don’t work — yes, these are axle bar sleeves. You will need axle collars. Other reviews mention no center knurling on handles. This really isn’t a big deal. It’s very easy to line your knuckles up with the sleeves to ensure your hands are centered. Really nice bar. Would buy again for sure
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
#RYOUROGUETag je foto's op Instagram en Twitter met #RYOUROGUE... dan word jij misschien opgenomen in onze galerijBekijk volledige galerij