Daily Shipping Deals






Rogue HR-2 Half Rack

Rogue HR-2 Half Rack (90-70)

Availability: Ships in 10-14 business days

Rogue HR-2 Half Rack (108-90)

Availability: Ships in 10-14 business days

HR-2 Conversion Kit
16" Pin/Pipe Safety Set
For Use with Rogue HR-2 Half Rack Only.
SP3358 Plate Storage Pair - Long for Monster Lite

Rogue HR-2 Half Rack

The customizable Rogue HR-2 Half Rack can be installed as a stand-alone unit or by converting an existing Monster Lite Series squat stand.

Manufactured in Columbus, Ohio, the HR-2 features the same 2x3” 11-gauge steel base and 48”x49” footprint as the SML-2, but incorporates an additional pair of 3x3” 11-gauge steel uprights and 17” crossmembers in the back of the unit. This gives the rack a huge amount of additional storage capacity and almost a foot and a half of inside depth for benching, rack pulls, and more. The Half Rack also offers a range of customizable options to best suit your needs—including the optional plate storage and pin/pipe safety sets, and a selection of different heights for the uprights themselves (90” or 108” for the front; 70” or 90” for the back).

IMPORTANT: If you already own a Rogue Monster Lite Squat Stand (SML-1, SML-2, or SML-3) and wish to convert it to an HR-2, we offer a Half Rack Conversion Kit that would include all the components and hardware you’ll need.


  • Made in the USA
  • Steel Notes: 2x3” 11-gauge base, 3x3” 11-gauge uprights
  • Footprint: 48”x49”
  • (1) Monster Lite J-Cup Pair included standard
  • (1) 43” Single Skinny Pull-Up Bar
  • Back Upright Height Options: 70”, 90” – Front Upright Height Options: 90”, 108"
  • Optional Add-Ons: 16” Pin/Pipe Safety Set; Plate Storage Pairs
  • Unit does not need to be bolted to the floor.

HR-2 Conversion Kit Includes:

  • (1) Pair Monster Lite Sticks (90" or 70")
  • (1) Pair HR-2 Half Rack Crossmembers
  • All additional hardware required

Compatible Accessories Include: Monster Lite Matador | Monster Lite Safety Spotter Arms

Gear Specs

Brand Rogue Fitness
Color Black
Product Weight Varies based on Upright selection (225lbs - 255lbs)
Length 49"
Width 48"
Height Varies - 92" or 110"
Foot Print 48" x 49"
Steel Notes 3 x 3" 11-gauge uprights, 2 x 3" 11-gauge base
Other Product Specs Westside Hole Spacing
Squat Stands 3x3" Steel
Made In USA Yes
Monster Lite Compatible Yes
Rogue HR-2 Half Rack is rated 4.8182 out of 5 by 11.
Rated 3 out of 5 by from Sturdy and stable I converted my SML-1 to an HR2 half mainly because I wanted something more sturdy. I am giving this 4/5 Stars because you'll need to buy the pull-up bar separately. You'll need the pull-up bar to stabilize your 90" uprights. Also, the pull-up bar doesn't include the 6 qty- 4.5"X 3/8 bolts ($25 at hardware store). aside from this, I like the sturdiness and stability that the conversion kit provides. I bought the Fat Bar (2"), which will help improve my grip, I hope.
Date published: 2016-04-19
Rated 5 out of 5 by from Update to my SML 1 I posted a review of my SML 1 rack a month back ( included pics ) and decided to upgrade to the half rack after checking out a few reviews and pictures below in this thread. This setup for tight spaces is perfect. I didn't want...or have the room for another weight tree so this kills two birds with one stone. Doesn't take up anymore floor space and it looks amazing. Just like the squat rack itself, every nut and bolt lined up perfectly. No surprises. Highly recommended package.
Date published: 2016-02-18
Rated 5 out of 5 by from Perfect I bought this over 6 months ago and have not wanted to go back to the gym since! This thing is very sturdy. I would recommend this over a full rack just because you don't have to worry about getting the bar out from the middle to switch to another type of exercise. I do not crossfit, I prefer shocking the muscle.
Date published: 2015-10-12
Rated 5 out of 5 by from Super Sturdy Design This bad boy is stout, functional and fits perfectly into a tight space. My son has enlisted in the Marine Corps. with boot camp 9 months away. We needed a place to train but only had a small space in the garage. This unit was just the ticket. Customer service was excellent, delivery was fast and assembly was easy. Now comes the fun part: driving iron with my boy to help prepare him for the challenges ahead.
Date published: 2015-09-30
Rated 5 out of 5 by from Black Beauty :-) Bough this last week, and it arrived 4 days later. How quick can it be? Rogue staff is very helpful, although they work primarily on email only. Took me 3 hours to assemble. I moved the back brace a little higher to accommodate my cable column which goes right behind the rack. Rock solid, which means it does not wobble at all. I also purchased Matador Dip attachment and upgraded Sandwich J-Hooks. Look great with my Ivanko revolver plates.
Date published: 2015-08-02
Rated 5 out of 5 by from Perfect Just got my garage box set up and this thing has exceeded my expectations. I was worried about two things: stability with kipping pull-ups/toes to bar, and being able to do pull-ups without hitting my head with a low 8' ceiling. This thing is solid, tried some pull-ups last night after hand tightening just to test the clearance and it was a rock. This morning, after tightening the nuts with an impact driver (yes, driver not wrench) it became even more stable - I didn't think that was possible. Absolutely no play from forward to aft when rocking, and less than a centimeter of play left to right if you're on the ground trying to rock it. Felt no difference with plates stored or w/o - it's solid either way. Plenty of clearance up for pull-ups with the single skinny pull-up bar mounted on the second holes from the top. You will not be able to do muscle-ups unless you have a really high ceiling. Quality is top notch, hardware is beefy. Install instructions are lacking, but the pictures on the website help out a lot. I started from the bottom up for install. It takes longer to unpack the thing, discard boxes, and organize the hardware than it does to complete the install.
Date published: 2015-05-09
Rated 5 out of 5 by from SOLID! This rack is amazing! This was perfect for my home gym as it is not clunky as the full rack. It does everything it should and more. I weigh 220lbs and have very little movement on this thing when I do pull ups - even without any weight storage. I highly recommend this product. Rogue Fitness was awesome too - fast shipping and superb packaging.
Date published: 2015-03-10
Rated 5 out of 5 by from Great Functionality/Ease of Use for Small Spaces Very satisfied Pros: 1) Perfect for space constrained rooms 2) Does not need to be bolted to floor 3) More stable than the SML-2 (already very stable rig) 4) Storage options are great 5) Top quality craftsmanship I will order another set of J-cups and additional storage posts. 2" bar option at the time of order would be great.
Date published: 2015-02-18
  • 2016-06-25T07:33CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_XX11797, PRD, sort_mostRecent
  • clientName_rogue
Rated 5 out of 5 by from Beefy, solid rack I purchased this rack after looking long and hard for something that: - didn't need to be bolted down - had pipe safeties for bench and squat w/spotter - pull up bar - sufficient space for plate storage - sufficient space for dip station This is the only rack that fits these requirements. Love the rack. Between my wife and I, it will get about 10 hours of use per week. Something of note: If you purchase the long plate storage attachment, it can hold (2) 45s and (2) 25s in the HiTemp bumper plates. No more. Or (3) 45s. Also, you will need to mount the pegs to the back of the unit in order to allow room for bench press within the rack. If you can't do that due to space constraints, buy the spotter arms. Most will be fine with pipe safeties.
Date published: 2014-03-22
Rated 5 out of 5 by from awesome peice of steel I just received the half rack Thursday last week and it only took about 20 minutes to unwrap and assemble (used my impact drill with socket adapter) looks great, very solid construction with clean welds(good even lines and no slag left behind under paint)and doesn't take as much space as a cage which is why I bought it. Its only taken two workouts of abuse so far but I see this thing lasting a lifetime
Date published: 2014-01-28
  • 2016-04-12T08:06CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.0
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_XX11797, PRD, sort_mostRecent
  • clientName_rogue