The 2x3 Strip® 2.0
The 2x3 Strip® 2.0
Caratteristiche del prodotto | |
| Marca | Rogue Fitness |
| Colore | Nero |
| Prodotto negli Usa | SÌ |
| Peso del prodotto | 10.15LB |
| Lunghezza | 36" |
| Larghezza | 3" |
| Informazioni sull'acciaio | Tubo in acciaio calibro 11 da 2" x 3" |
| Altre specifiche del prodotto | Hardware for mounting to wood studs included |
Descrizione prodotto
The 2x3 Strip® 2.0 is our newly redesigned wall-mount accessory tool—optimized for efficiently holding a wide range of attachments primarily from the Rogue Infinity line.
Leggi ancora
The 2x3 Strip® 2.0
The 2x3 Strip® 2.0 is our newly redesigned wall-mount accessory tool—optimized for efficiently holding a wide range of attachments primarily from the Rogue Infinity line.
The Strip 2.0 measures 36” in length and can be positioned horizontally or vertically depending on the function required. Multiple Strips can also be installed in a series so the user can create his or her ideal custom set-up (mounting more than one in sequence, for example, can allow for convenient height adjustments on the Kids Pull-Up Bar).
With this version, The Strip is a square, 2x3” 11-gauge steel tube (rather than a channel), improving its overall strength and secure fit/compatibility with any of the following products:
Each order comes with (1) 5/8" x 4" detent pin and a set of (4) 3/8" x 2-1/2" wood lags for mounting to a stud.* The front of the Strip includes (4) oversized holes to allow for easy tightening of the lags. Holes are spaced 2"-on-center along each side of the Strip.
*Important: If attempting to secure the Strip to a wall construction other than wood stud, the buyer is responsible for using the correct hardware. The Strip is NOT recommended for mounting to drywall or metal studs.
Accessories not included.
See Also: 3x3 Strip 2.0 for Monster Lite Mounts
Caratteristiche del prodotto
Caratteristiche
- Prodotto negli Stati Uniti
- Wall-Mount Storage Tube - 2x3” 11-gauge steel - Laser-cut Rogue branding
- Venduto singolarmente
- Finish: Texture Black Powdercoat
- Length: 36"
- Width: 3"
- Weight: 10.15LB
- For use on wood studs and concrete walls (May require the use of a stringer or additional support)
- For use ONLY with compatible 2x3 accessories
- (1) ⅝” x 4” Detent Pin
- (4) 3/8" x 2-1/2" Wood Lags
- 4 front holes on Strip for tightening lags
- Holes spaced 2” on center on both sides of Strip
Spedizione
Spedizione veloce Rogue
Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.
