The 3x3 Strip® 2.0
The 3x3 Strip® 2.0
Descrizione prodotto
THE 3X3 STRIP® 2.0
The 3x3 Strip® 2.0 is our newly redesigned, wall-mounted storage accessory—optimized for efficiently holding a wide range of attachments from the Rogue Monster Lite line. It’s available in both a standard 36” length and a new 16” Half-Strip format.
Leggi ancora
THE 3X3 STRIP® 2.0
The 3x3 Strip® 2.0 is our newly redesigned, wall-mounted storage accessory—optimized for efficiently holding a wide range of attachments from the Rogue Monster Lite line. It’s available in both a standard 36” length and a new 16” Half-Strip format.
Both sizes of The 3x3 Strip 2.0 are square, 3x3” 11-gauge steel tubes (rather than channels), improving the overall strength of the design and its secure fit/compatibility with any of the following ML products:
- Monster Lite Matador (All-In-One Dip Station)
- Monster Lite Plate Storage Channel
- Vertical Mount Single Bar Holder
- Landmines
- Monster Lite Kids Pull-Up Bar
- Monster Lite Chain Hanger
- Monster Lite Matador Hanger
Gym owners can position The Strip horizontally or vertically depending on the function required, and multiple Strips can also be installed in a series so the user can create his or her ideal custom storage set-up (mounting more than one in sequence, for example, can allow for convenient height adjustments on the Kids Pull-Up Bar). For a simpler set-up, like hanging up just one Echo GHD or Matador, the space-efficient / cost-efficient Half-Strip may be the best option.
Accessories not included.
Caratteristiche del prodotto
Caratteristiche:
- Prodotto negli Stati Uniti
- Wall-Mount Storage Tube - 3x3” 11-gauge steel - Laser-cut Rogue branding
- Venduto singolarmente
- Finish: Signature Texture Black Powdercoat
- Length: 36”
- For use on wood studs and concrete walls (May require the use of a stringer or additional support)
- For use ONLY with Monster Lite compatible accessories
- (1) ⅝” x 4” Detent Pin
- (4) 3/8" x 2-1/2" Wood Lags
- 4 front holes on Strip for tightening lags
- Holes spaced 2” on center on both sides of Strip
Important: If attempting to secure the Strip to a wall construction other than wood stud, the buyer is responsible for using the correct hardware. The Strip is NOT recommended for mounting to drywall or metal studs.
Spedizione
Spedizione veloce Rogue
Il Sistema di Spedizione Rogue ti consente di monitorare il tuo ordine dal momento in cui lo effettui fino al momento in cui arriva alla tua porta. Ordina oggi, traccia oggi.
The 36” 3x3 Strip includes:
- (1) 5/8" x 4" detent pin
- (4) 3/8" x 2-1/2" Wood Lags for mounting to a stud*
- (4) Oversized Holes on front to allow for easy tightening of the lags
- Wallmount Hole Spacing: 8” on-center (top and bottom), 16” on-center (middle holes)
- Hole Spacing along sides: 2” on-center
- Finish: Signature Texture Black Powdercoat
- Laser-Cut Rogue branding
The 16” 3x3 Half Strip includes:
- (1) 5/8" x 4" detent pin
- (2) 3/8" x 2-1/2" Wood Lags for mounting to a stud*
- (2) Oversized Holes on front to allow for easy tightening of the lags
- Wallmount Hole spacing: 12” on-center
- Hole Spacing along sides: 2” on-center
- Finish: Signature Texture Black Powdercoat
- Laser-Cut Rogue branding
Important: If attempting to secure the Strip to a wall construction other than wood stud, the buyer is responsible for using the correct hardware. The Strip is NOT recommended for mounting to drywall or metal studs.
