Rogue P-4 Pull-up System
Rogue P-4 Pull-up System
Montagemateriaal NIET inbegrepen
Productspecificaties | |
| Merk | Rogue Fitness |
| Gemaakt in de VS | Ja |
| Gewicht | 37 lbs |
| Lengte | 32" |
| Hoogte | 31" |
| Staalgegevens | 1x2", 11 AWG |
| Andere kenmerken | Draagvermogen: ruim 500 lbs.
Afstand tussen stang en wand of plafond: 30" |
Productbeschrijving
Manufactured in the USA using the same 11-gauge steel as our full-scale rigs and racks, the versatile Rogue P-4 Pull-Up System is a single, compact unit optimized for wall mounts and ceiling mounts*. Once anchored securely to concrete or wood studs, the P-4’s pull-up bar will be positioned at a 30” depth from the wall/ceiling. That’s 8” more than the depth of the P-3 Pull-up system, allowing more room for kipping movements.
Meer lezen
Rogue P-4 Pull-Up System
Manufactured in the USA using the same 11-gauge steel as our full-scale rigs and racks, the versatile Rogue P-4 Pull-Up System is a single, compact unit optimized for wall mounts and ceiling mounts*. Once anchored securely to concrete or wood studs, the P-4’s pull-up bar will be positioned at a 30” depth from the wall/ceiling. That’s 8” more than the depth of the P-3 Pull-up system, allowing more room for kipping movements.
The complete P-4 Pull-Up System comes standard with a 52” Pull-Up Bar, and can serve as a dependable rings station, as well. If you want to expand the set-up for more athletes, you can daisy-chain additional brackets together by spacing them out 3-4 feet apart, then running a single 1” steel tube/1.25” OD pipe through all of the brackets (5 brackets, for example, would create a 16-foot pull-up bar). In most cases, this type of pipe can be purchased at your local hardware store.
*For ceiling mounts, the P-4 is often the best option if your ceiling height is above 9’6”. If the height is between 8’ and 9’6”, a P-3 System could be a better option.
Productspecificaties
Specifications:
- 11-Gauge Steel
- Depth: 30" from wall/ceiling
- Width: Can be set on 16" Stud Centers or custom width up to 48" between brackets
- Total Length: You can add brackets for miles by putting brackets in a row. 1"/1.25" Pipe can be purchased from local tube supplier in 24' lengths.
- Orientation: This unit can be setup vertically or horizontally, our unique support arm will keep this rig sturdy
- Mounting Hardware NOT included.
Recommended Setups:
- Distance between brackets: Concrete – 36", Wood Studs – 32" or 48"
- Height: 7' 6" - 8' on center of bar but this can be adjusted based on ceiling height or athlete height
All Rogue Pull-up Rig Assemblies are guaranteed against failure If properly installed!
Verzenden
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.