Shop Rogue Fitness APO to ship the gear you need to US Military addresses.
Not shipping to an APO / FPO / DPO military address?
Visit: www.roguefitness.com
Live Chat

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
620 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
620 Reviews
Made in U.S.A.
KB-9LB Rogue Kettlebell - E Coat
$30.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$55.00
KB-35LB Rogue Kettlebell - E Coat
$65.00
KB-40LB Rogue Kettlebell - E Coat
$70.00
KB-44LB Rogue Kettlebell - E Coat
$75.00
KB-53LB Rogue Kettlebell - E Coat
$85.00
KB-62LB Rogue Kettlebell - E Coat
$105.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).
Loading

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Note: *Due to the casting process, cast products may have minor variances in the finish.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

MADE IN THE USA - CAST IN CADILLAC
1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

DUCTILE IRON
2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

E-COAT FINISH
3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

GLOSS & BRANDING
4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

WIDE SELECTION
5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

Approved for ACFT
6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 620 Reviews
SThom
Oregon
★★★★★
★★★★★
1 week ago
Not very smooth finish, fairly rough
This is my 3rd e-coat kettlebell and 2nd of this weight. Not sure if this was from a bad batch or if quality control missed it but the finish is not nearly as smooth as my other bells, and is actually kind of rough. Pretty disappointing, especially at this price point
Originally posted on roguefitness.com

Response from Rogue Fitness:

4 days ago
Thanks for raising this to our attention! Our team has reached out to evaluate your kettlebell.
Vitu
Ohio
★★★★★
★★★★★
1 week ago
Weight is consistent
Purchased two 12kg. They were identical in weight, no variance. Lifetime investment. Made in USA!
Originally posted on roguefitness.com
Hernando O
★★★★★
★★★★★
2 weeks ago
Kettlebell Review
Solid workout tool, I love it. Have never used a kettlebeel before but have heard great things. Glad I made the investment.
Originally posted on roguefitness.com
David Anon
Michigan
★★★★★
★★★★★
3 weeks ago
High Quality, Classic, and Effective
Absolutely love these. The E Coat both looks and feels great on the grip. No rough edges and makes for smoother movement in the palm. Highly recommend them!
Yes, I recommend this product
Originally posted on roguefitness.com
Krabold
Jackson MI
★★★★★
★★★★★
3 weeks ago
Worth it.
Nice quality and made in Michigan! Not too much more than the kettlebells from big box stores and they don't have a slippery coating like those ones.
Yes, I recommend this product
Originally posted on roguefitness.com
MMella
★★★★★
★★★★★
March 14
It is what it is
It is what it is. It's a kettlebell. It's heavy. It's great. But the 88 pounds to complete my "set".
Originally posted on roguefitness.com
Old Man Rivers
★★★★★
★★★★★
March 12
Kettlebell is King
Continuing to build my at-home kettlebell collection. You won't find a better kettlebell for the cost. Love them! Picked up a pair of 70 pounders for heavier squats, thrusters, OH work, et cetera.
Yes, I recommend this product
Originally posted on roguefitness.com
Sarapax
Western Mass
★★★★★
★★★★★
March 8
Great, but on the heavy side
This kettlebell is very sturdy and nice looking. It might be a little over built though. It's quite heavy to move around.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery