Gift CardsContact UsOrder Status
Live Chat

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1102 Reviews
Made in U.S.A.

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1102 Reviews
Made in U.S.A.
$605.00

Rack Depth*

Product Description

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

Read More

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 21.5" or 41.5"
    Stringer Not Included
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 5/8" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, 13/16" extension off the mounting surface

See More: Rogue Power Racks

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Product Specifications: Rogue RML-3W Fold Back Wall Mount Rack

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight163LB or 190LB
LengthFrom Wall - 24.75" or 43.75"
Width56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height90.375"
Foot Print24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes3x3" 11 gauge steel
Other Product SpecsInside depth - 21.5" or 41.5"
Stringer Not Included
Monster Lite CompatibleYes

KEY FEATURES OF THE RML-3W

HEAVY GAUGE AMERICAN STEEL & HARDWARE
1

HEAVY GAUGE AMERICAN STEEL & HARDWARE

The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

CHOICE OF DEPTH
2

CHOICE OF DEPTH

The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, both sides need to be folded outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

FIT, FINISH & LIFETIME WARRANTY
3

FIT, FINISH & LIFETIME WARRANTY

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

SPACE EFFICIENCY
4

SPACE EFFICIENCY

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

EASY INSTALLATION + OPTIONAL STRINGERS
5

EASY INSTALLATION + OPTIONAL STRINGERS

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

Stringer Installation

Recommended Products

Reviews

1 - 8 of 1102 Reviews
Kobayashi
Los Angeles, CA
★★★★★
★★★★★
1 week ago
Excellent quality, but it’s just not for me…
I live in an attached condo and I installed this rack in my garage. Quality is excellent, as always from Rogue. My issue is how much noise this rack generates and how much it shakes. Doing basic workouts such as dips rattles the entire rack and wall. Already received a complaint from my neighbor. Now I’m gonna have to find a way to offload this thing to someone else and try and recoup some of my money. I’ll be looking at a regular rack that doesn’t attach to the wall as a replacement.
Helpful?
Yes · 2
No · 0
Jess F
Pompano Beach, FL
★★★★★
★★★★★
4 weeks ago
Great quality!
Awesome product…solid, quality construction. Very happy we purchased for our home garage gym.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Must get
Phoenix/Tempe
★★★★★
★★★★★
4 weeks ago
Badass!
This is exactly what we needed for our little gym in the office. our old squat rack was unstable, but this one is so sturdy and safe! It was easy to install and so universal. This, a bench, and some plates are all you need for your entire workout.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
PhilC
San Diego, CA
★★★★★
★★★★★
4 weeks ago
Rack
I purchased this rack early last year and finally put it together in the summer after moving into a new house. The rack itself is well built. You can tell it is strong and capable of taking a heavy load. My only problem or issue isnt with the rack. I was sent an incomplete order. The washers werent provided to me. Not knowing this at the time, I hung the rack with the parts Rogue provided me, bolts, no washers. I didnt find this out until a couple months later when I went to a buddy's house and saw his rack. I was pretty upset when I saw this. Worrying this rack was going to fall on me someday. Luckily I saved all the packaging and instructions but I didnt find any washers. Is this a huge issue? I dont know. We'll see. Im not 100 percent satisfied with this purchase though. And everytime I use the rack I worry about it. Its really a shame because Rogue makes some excellent stuff. Just be aware. Check your orders. Make sure its all there. Could be washers or could be something more important.
Helpful?
Yes · 3
No · 1

Response from Rogue Fitness:

3 weeks ago
We sincerely apologize for any missing hardware. The team has reached out via email to confirm the new address these washers can be sent to.
Nygel
Ohio
★★★★★
★★★★★
5 weeks ago
Functional space saver
Easy setup and great for strict pull ups, bench work and for squat workouts. The 21" is to close for kippinñg and t2b but the space savings males it worth it. Also, the bright green makes me happy.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
pbVirginia
★★★★★
★★★★★
February 14
great for home gym
I set this up on in an upstairs bedroom, on hardwood floor with rubber gym tile mats to protect the flooring. I mainly do isometrics, resistance band, and pull-up types of exercises. With the squat wedges and bands I can do a variety of exercises including guided squats and butterflies, balancing my weight at an angle. This replaces a system that relied on TRX ceiling mounts. I liked the slots in the horizontal wall mounts...i located the lower mount so that the electric outlet would be exposed. However, i did have to put an extra layer of rubber matting under the vertical pieces to keep everything aligned. As someone else mentioned, it helps a lot to convert the cardboard insert into a template (mark the outlines of plate onto the cardboard and cut it with a sharp blade). Then you can make sure everything aligns the way you want it to, and drill holes from the template.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Landon F
★★★★★
★★★★★
February 14
Quality product
Great and exactly what I need, listed with 4 stars due to quality control concern on machining of bolts. One of mine came in with a deformed thread making it so it can’t be used. I messaged rogue yesterday though and will update once a resolution is received.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0

Response from Rogue Fitness:

4 weeks ago
Sorry to hear of any issues with your bolt - we have a replacement pack on the way to you now.
Jcrawford
★★★★★
★★★★★
February 14
Great product
I am thrilled with the rack and all the gym items I purchased. They take punishment and keep going. Will only ever use Rouge for my fitness needs.
Helpful?
Yes · 0
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery