Rogue INDY Functional Trainer
Rogue INDY Functional Trainer
Couleur(s) (13)*Rogue Red
Hauteur*
Profondeur du rack*
Type de rack*
Côté rack*
Ajouter des linceuls ? (Noir texturé)*
Front Pull-up Bar: (8)XM-431 Monster 43" Single Pull-up Bar
Rear Crossmember: (14)XM-43N Monster 2.0 43" Nameplate Crossmember (+146,40 €)
J-Cup: (4)Monster Standard J-Cup Pair
Plate Storage Pins: (2)None
Add Half Rack Feet: (2)None
Entraîneur fonctionnel Rogue INDY AccessoiresOptions disponibles (11)
Caractéristiques | |
| Marque | Rogue Fitness |
| Fabrication aux États-Unis | Oui, avec des poulies importées |
| Longueur | 64,8" (profondeur 24") 70,8" (profondeur 30") 83,8" (profondeur 43") |
| Largeur | 58,7" (sans rangement de poids) 75 5/8" (avec rangement de poids) |
| Hauteur | 81.5", 91.5", 101.5" |
| Surface au sol | Varie selon la taille du rack |
| Acier | Crémaillère : 3 x 3 po en acier calibre 11 Plaques de poulie : acier 1/4 po |
| Autres caractéristiques | Le linceul ajoute 3/4" à chaque côté |
| Type de câble | Câble d'avion Mil Spec de 3/16" fabriqué aux États-Unis |
Description produit
The Rogue INDY Functional Trainer is a modular, rack-mounted functional trainer designed to bring adjustable-height cable training without increasing the rack footprint. Available as independent sides—left only, right only, or dual sides—this 2:1 ratio functional trainer delivers smooth and controlled resistance, allowing for a wide range of exercises in a compact, efficient design.
This is also available as an INDY Functional Trainer Add-On for pre-existing Rogue Monster racks.
FULLY CUSTOMIZABLE
The Rogue INDY Functional Trainer allows users to select from multiple rack depths, heights and configurations, making it easier than ever to customize your setup to fit your training space. With fully independent sides, users can train unilaterally or perform multi-station workouts without interference. Expand your rack system by integrating additional attachments, storage systems, and more.
PREMIUM CONSTRUCTION & EASY ADJUSTABILITY
The Rogue INDY Functional Trainer features a mix of 3.5” to 6” pulleys, along with 3/16" USA-made military aircraft-grade cable for exceptional durability and longevity. The adjustable-height pulleys provide smooth movement during any exercise, while the overbuilt swivels ensure an optimal training angle for every movement.
COMPACT & EFFICIENT DESIGN
The Rogue INDY Functional Trainer maintains the smallest possible footprint, integrating seamlessly into existing racks without increasing their length or width. Whether used for single-arm isolation movements, bilateral cable exercises, or full-body functional training, this system delivers unmatched performance in a minimal space.
BUILT ON THE ROGUE MONSTER RACK 2.0
The Rogue Monster Rack is fully customizable utilizing 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. The 2.0 version includes a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.
Important: This rack must be bolted to the floor before use.
Note: The Satin Clear finish is a transparent finish, meaning any blemishes or marks from the manufacturing process will still be visible in the steel.
Lire plus
Rogue INDY Functional Trainer
The Rogue INDY Functional Trainer is a modular, rack-mounted functional trainer designed to bring adjustable-height cable training without increasing the rack footprint. Available as independent sides—left only, right only, or dual sides—this 2:1 ratio functional trainer delivers smooth and controlled resistance, allowing for a wide range of exercises in a compact, efficient design.
This is also available as an INDY Functional Trainer Add-On for pre-existing Rogue Monster racks.
FULLY CUSTOMIZABLE
The Rogue INDY Functional Trainer allows users to select from multiple rack depths, heights and configurations, making it easier than ever to customize your setup to fit your training space. With fully independent sides, users can train unilaterally or perform multi-station workouts without interference. Expand your rack system by integrating additional attachments, storage systems, and more.
PREMIUM CONSTRUCTION & EASY ADJUSTABILITY
The Rogue INDY Functional Trainer features a mix of 3.5” to 6” pulleys, along with 3/16" USA-made military aircraft-grade cable for exceptional durability and longevity. The adjustable-height pulleys provide smooth movement during any exercise, while the overbuilt swivels ensure an optimal training angle for every movement.
COMPACT & EFFICIENT DESIGN
The Rogue INDY Functional Trainer maintains the smallest possible footprint, integrating seamlessly into existing racks without increasing their length or width. Whether used for single-arm isolation movements, bilateral cable exercises, or full-body functional training, this system delivers unmatched performance in a minimal space.
BUILT ON THE ROGUE MONSTER RACK 2.0
The Rogue Monster Rack is fully customizable utilizing 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. The 2.0 version includes a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.
Important: This rack must be bolted to the floor before use.
Note: The Satin Clear finish is a transparent finish, meaning any blemishes or marks from the manufacturing process will still be visible in the steel.
Caractéristiques
Specifications:
- Made in USA with Imported Pulleys
- Length: 34" - 80”
- Width: 53" (no weight storage), 75 5/8" (with weight storage)
- Height: 81.5”, 91.5", 101.5"
- Steel Notes: Rack: 3x3" 11 Gauge Steel, Pulley Plates: 1/4" Steel
- Monster Compatible
- Pulley Ratio: Functional Trainer 2:1 for a total possible load of 150LB
- Cable: 3/16" US Made Mil Spec Aircraft Cable
- Cable Attachments: Stainless Steel Clevises - Machined in USA
- Weight Source: 300LB Weight Stack
Comparaison des racks
INDY FUNCTIONAL TRAINER GEAR SPEC COMPARISON:
Select your RACK HEIGHT:
Select your Rack TYPE:
| Rack depth | 24" |
|---|---|
| Made in USA | Yes - Imported Pulleys |
| Length | 34" |
| Width | 53" (no weight storage) 75 5/8" (with weight storage) |
| Total Height | 81.5" |
| Foot Print | 34" x 53" (no weight storage) 34" x 75 5/8" (with weight storage) |
| Steel Notes | 3x3" 11 Gauge Steel |
| Trolley Cable Travel | 59" |
| Monster Compatible | Yes |
| Rack depth | 24"-24" | 30"-24" | 43"-24" |
|---|---|---|---|
| Made in USA | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys |
| Length | 61" | 67" | 80" |
| Width | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) |
| Total Height | 81.5" | 81.5" | 81.5" |
| Foot Print | 61" x 53" (no weight storage) 61" x 75 5/8" (with weight storage) | 67" x 53" (no weight storage) 67" x 75 5/8" (with weight storage) | 80" x 53" (no weight storage) 80" x 75 5/8" (with weight storage) |
| Steel Notes | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel |
| Trolley Cable Travel | 59" | 59" | 59" |
| Monster Compatible | Yes | Yes | Yes |
Select your Rack Type:
| Rack depth | 24" | 30" | 43" |
|---|---|---|---|
| Made in USA | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys |
| Length | 34" | 40" | 53" |
| Width | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) |
| Total Height | 91.5" | 91.5" | 91.5" |
| Foot Print | 34" x 53" (no weight storage) 34" x 75 5/8" (with weight storage) | 40" x 53" (no weight storage) 40" x 75 5/8" (with weight storage) | 53" x 53" (no weight storage) 53" x 75 5/8" (with weight storage) |
| Steel Notes | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel |
| Trolley Cable Travel | 79" | 79" | 79" |
| Monster Compatible | Yes | Yes | Yes |
| Rack depth | 24"-24" | 30"-24" | 43"-24" |
|---|---|---|---|
| Made in USA | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys |
| Length | 61" | 67" | 80" |
| Width | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) |
| Total Height | 91.5" | 91.5" | 91.5" |
| Foot Print | 61" x 53" (no weight storage) 61" x 75 5/8" (with weight storage) | 67" x 53" (no weight storage) 67" x 75 5/8" (with weight storage) | 80" x 53" (no weight storage) 80" x 75 5/8" (with weight storage) |
| Steel Notes | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel |
| Trolley Cable Travel | 79" | 79" | 79" |
| Monster Compatible | Yes | Yes | Yes |
Select your Rack Type:
| Rack depth | 24" | 30" | 43" |
|---|---|---|---|
| Made in USA | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys |
| Length | 34" | 40" | 53" |
| Width | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) |
| Total Height | 101.5" | 101.5" | 101.5" |
| Foot Print | 34" x 53" (no weight storage) 34" x 75 5/8" (with weight storage) | 40" x 53" (no weight storage) 40" x 75 5/8" (with weight storage) | 53" x 53" (no weight storage) 53" x 75 5/8" (with weight storage) |
| Steel Notes | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel |
| Trolley Cable Travel | 99" | 99" | 99" |
| Monster Compatible | Yes | Yes | Yes |
| Rack depth | 24"-24" | 30"-24" | 43"-24" |
|---|---|---|---|
| Made in USA | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys |
| Length | 61" | 67" | 80" |
| Width | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) | 53" (no weight storage) 75 5/8" (with weight storage) |
| Total Height | 101.5" | 101.5" | 101.5" |
| Foot Print | 61" x 53" (no weight storage) 61" x 75 5/8" (with weight storage) | 67" x 53" (no weight storage) 67" x 75 5/8" (with weight storage) | 80" x 53" (no weight storage) 80" x 75 5/8" (with weight storage) |
| Steel Notes | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel | 3x3" 11 Gauge Steel |
| Trolley Cable Travel | 99" | 99" | 99" |
| Monster Compatible | Yes | Yes | Yes |
Accessoires inclus
The Rogue INDY Functional Trainer comes standard with the following accessories:
Fixation de câble à poignée unique
Demi-bande de monstre
(1) Single Handle Cable Attachment and Monster Half Strip are included per the number of sides selected.
The Half Strip serves as bolt caddies for the hardware. After assembly, it can be used for their intended purpose as a wall-mounted storage accessory.
Assemblée
INDY FUNCTIONAL TRAINER ASSEMBLY INSTRUCTIONS
Select your RACK HEIGHT:
Select INSTRUCTIONS:
COMING SOON
COMING SOON
Select INSTRUCTIONS:
COMING SOON
COMING SOON
FAQ
Livraison
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.
KEY FEATURES OF THE ROGUE INDY FUNCTIONAL TRAINER:
Power Rack et entraîneur fonctionnel
Fully functional power rack with 2:1 functional trainer in one compact footprint. The Rogue INDY Functional Trainer doesn't add to the overall footprint of your rack so you can save on space while maximizing your training.
Configurez votre Rack
All standard Monster Rack configurations are available with the Rogue INDY Functional Trainer configuration. Choose everything from your height, depth and color, to your pullup bars and J-cups for a rack custom to your training needs.
Améliorez votre Monster Rack
If you already have a Monster Rack, the add-on kit is available to upgrade your rack into an Rogue INDY Functional Trainer.
Compatible avec les accessoires Monster
The Rogue INDY Functional Trainer is compatible with Monster attachments to include the Velocidor, Monolift Arms, Single Leg Roller etc.