Rogue Monster Safety Strap System 2.0

★★★★★
★★★★★
4
23 Avis
Fabrication aux États-Unis.

Rogue Monster Safety Strap System 2.0

★★★★★
★★★★★
4
23 Avis
Fabrication aux États-Unis.
RM-3 Monster Strap Safety System 2.0 (30" depth)
294,00 €
Expédié en 4-6 semaines
RM-4 Monster Strap Safety System 2.0 (43" depth)
300,00 €

Caractéristiques

MarqueRogue Fitness
Fabrication aux États-UnisOui
Largeur43", 30", 24"
DiamètreGoupille de 1 po de diamètre
Matériaux3" Wide Reinforced Nylon, safety-rated for 10,000LB
Acier0.3125" d’épaisseur
Description produit

Le nouveau design des Monster Safety Strap Hangers Rogue les rend encore plus faciles à régler, et entièrement compatibles avec tous les racks/rigs Monster.

Le système Monster Strap Safety System 2.0 est fait en un nylon renforcé de 3 po de large, d’une résistance évaluée à 10 000 lb. Chaque sangle réglable est fixée à un ensemble de supports fabriqués en acier de 0,3125 po d’épaisseur, et dotée d’une goupille de 1 po de diamètre. Plus avantageuses que sur les systèmes de sécurité traditionnel à broches/tubes et/ou rabattables, les extrémités avant et arrière des sangles peuvent être réglées à différentes hauteurs. Cela permet de positionner la sangle de manière inégale, et donc de forcer une barre rouler loin d’un athlète pour assurer sa sécurité en cas de soulevé manqué. Le nylon de la sangle est également plus tolérant avec une barre qu’avec une alternative en acier.

Lire plus

Monster Safety Strap System 2.0

Le nouveau design des Monster Safety Strap Hangers Rogue les rend encore plus faciles à régler, et entièrement compatibles avec tous les racks/rigs Monster.

Le système Monster Strap Safety System 2.0 est fait en un nylon renforcé de 3 po de large, d’une résistance évaluée à 10 000 lb. Chaque sangle réglable est fixée à un ensemble de supports fabriqués en acier de 0,3125 po d’épaisseur, et dotée d’une goupille de 1 po de diamètre. Plus avantageuses que sur les systèmes de sécurité traditionnel à broches/tubes et/ou rabattables, les extrémités avant et arrière des sangles peuvent être réglées à différentes hauteurs. Cela permet de positionner la sangle de manière inégale, et donc de forcer une barre rouler loin d’un athlète pour assurer sa sécurité en cas de soulevé manqué. Le nylon de la sangle est également plus tolérant avec une barre qu’avec une alternative en acier.

Remarque : il n’est pas nécessaire de retirer les boulons/écrous pour régler la hauteur des sangles.

Les Monster Safety Strap Hanger Sets sont disponibles en trois profondeurs (43 po, 30 po, 24 po). Il existe donc un système correspondant aux dimensions de n’importe quelle station de la série Monster.

Livraison

Livraison rapide avec Rogue

Le système de suivi de livraison Rogue vous permet de suivre votre commande de notre entrepôt au pas de votre porte. Commandez aujourd’hui, commencez à suivre aujourd’hui.

Produits recommandés

Avis

1 - 8 commentaires sur 23
Mkrm
Greece
★★★★★
★★★★★
March 17
Very bad and outdated
This product is poorly designed and a huge pain to adjust. Furthermore it managed to scratch the red powder coat on my RM3. Many competitors have a far greater solution but Rogue keeps being outdated.
Utile ?
Oui · 5
Non · 0
David2025
Missouri
★★★★★
★★★★★
January 6
Look nice, but that's about it
I bought the twin functional trainer which includes these. They look nice, but otherwise very poorly designed. Awful to try to adjust, and since I have pulleys on my rack, they block the pulleys from the lowest possible spot. The only solution is to actually remove the strap safeties which is a whole other task itself. To add insult to injury, it scratched up the gunmetal grey coating on my brand new uprights. I have a pair of Bells of Steel flip down safeties coming in to replace these. Rogue doesn't even offer 30" flip downs that I could find, and if even if they did, they would be overpriced. Don't waste your time with these, just replace them immediately.
Damaged paint
The other upright
More scuffed paint
Initialement publié sur roguefitness.com

Réponse de Rogue Fitness :

January 7
We're sorry to see the safeties have damaged the powder coat on your uprights! We have reached out via email to take a closer look at this, including what appears to be a modification to the bracket's bolt. We're happy to look into this with you and appreciate you raising it to our attention.
Jake1991
California
★★★★★
★★★★★
January 3
Hard to remove/adjust.
I am extremely dissatisfied with the Monster safties. Would be perfect if it was like the monster lite setup but for a 3x3 upright. The current configuration is so cumbersome that I am forced to either fully retract or remove the safety bars. When engaged, they are excessively tight and difficult to adjust vertically between the uprights. In retrospect, I should have opted for third-party safety bars or the tubular safety option.
Initialement publié sur roguefitness.com

Réponse de Rogue Fitness :

January 15
Thank you for this feedback on the Monster Safety Straps. We have reached out via email to learn more about the excessive tightness you mentioned, and get any issues resolved.
Vic760
San Diego, CA
★★★★★
★★★★★
Feb 2024
Great, but could be improved
I bought these with my new RM-3. Great quality, uhmw plastic on the insides to protect the uprights. But a huge pain in the butt to adjust from bench to squats. Yes you can buy these Clevis pins but still have to take them on and off. I really wish they would make the a Monster straps like the RML version, where there attach like J Cups. So much convenient.
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
RichSl
Utah
★★★★★
★★★★★
Jan 2024
Excellent with one rare caveat
These are great. Easily adjust one side to quickly make mini adjustments for different lifters. Very durable and strong. Only issue is one day we were lifting 495 squats. The lifter missed the right j cup when racking so the weights hit the right side strap first at an angle. This caused both brackets to twist releasing them both. The pins were unlocked and released but the pins were barely holding on by friction no one got hurt. But I realized a push in the middle of the belt at a slight downward angle easily twists both side and releases them. There is no way to fully lock these in place which is a rare but possible occurrence. If you come straight down it is no issue. But if one side slips first it is. Again, a rare issue but we experienced it. Rogue makes a safety pin lock with an orange handle but the devices don’t have a hole to lock them in place. Would only be needed in rare occurrences with heavy weight.
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
Jon5
★★★★★
★★★★★
Mar 2023
Scratches things up
Works well but scratches things up. My screws holding the liner weren’t fully set and scratched my rack up pretty good. If you get a quality set this is an excellent product
Oui, je recommande ce produit
Initialement publié sur roguefitness.com

Réponse de Rogue Fitness :

Mar 2023
We're sorry for the issues with your Monster Strap Safeties. Upon investigation, our team has a new pair ready for you now.
Jacob01
★★★★★
★★★★★
May 2022
Not Great
The design of these straps make it so that it can't come off the rack without removing a bolt, which gets in the way of other attachments such as lever arms. Additionally there is very little slack in the strap itself, which makes it impossible to make large adjustments without pausing to adjust the other side.
Initialement publié sur roguefitness.com
Ezra
Dallas, Texas
★★★★★
★★★★★
Apr 2022
Great product
My only regret is that I did not purchase this earlier. Trying to save money by using the safety bars, that was a mistake
Oui, je recommande ce produit
Initialement publié sur roguefitness.com
#RYOUROGUETaguez vos photos sur Instagram et Twitter avec #RYOUROGUE pour avoir une chance de figurer dans notre galerieVoir galerie complète