Gift CardsContact UsOrder Status
Live Chat

Ghost Roller J-Cup 2.0 - 5/8" Pin

★★★★★
★★★★★
4
29 Reviews
Made in U.S.A.

Ghost Roller J-Cup 2.0 - 5/8" Pin

★★★★★
★★★★★
4
29 Reviews
Made in U.S.A.
Ghost Roller J-Cup 2.0 - 5/8" Pin
$195.00

Ghost Roller J-Cup 2.0 - 5/8" Pin Accessories
Available Options (2)

Ghost J-Cup Camber Bar Block
Ghost J-Cup Camber Bar BlockSee Details
$60.00
3 Ships Free Item
Replacement Roller Set
Replacement Roller SetSee Details
$50.00

Gear Specs

BrandGhost
Made In USAYes
Product Weight22LB
Width2.75"
Height10.625 (Total) / 7.875" (From Roller to Top)
Steel Notes3/8" Laser Cut & Machined Steel
Other Product SpecsRackable Depth - 2.875"
Product Description

We have partnered with the team at Ghost Strong to develop this exclusive Rogue-manufactured version of the Return Roller J-Cup 2.0. Our design keeps all the key features of Tim Grissel’s innovative original, including the patented conical rollers and multi-radius concave receiver that ensure each barbell returns to the front of the J-cup in an optimal position for the next lift. The only changes involve practical production upgrades in two different formats: Standard and Premium.

Read More

Ghost Strong Return Roller J-Cups 2.0 - Monster Lite

Manufactured by Rogue

We have partnered with the team at Ghost Strong to develop this exclusive Rogue-manufactured version of the Return Roller J-Cup 2.0. Our design keeps all the key features of Tim Grissel’s innovative original, including the patented conical rollers and multi-radius concave receiver that ensure each barbell returns to the front of the J-cup in an optimal position for the next lift. The only changes involve practical production upgrades in two different formats: Standard and Premium.

All versions of the Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off. 

Ghost Strong’s original threaded pin attachment and 1/2” thick backplate have been upgraded to a fully welded, reinforced pin with a complete channel (including the front lip, bottom, and backplate) made from a single piece of 3/8” formed steel. In addition, for our premium model, we swapped the original zinc-plated pins with stainless steel–making these the first Rogue J-cups to use that material.

We have continued to use Ghost Strong’s extra-tall backplate design (complete with Ghost branding) to give athletes a large target to hit when re-racking, and every clasp is still tested to meet Ghost’s strict tolerances, ensuring a tight, secure fit on a 3x3” upright. All welds are filled in to prevent any sharp edges, and an extra piece of UHMW plastic has been added to the front lip of each cup to protect the barbell–this is in addition to the UHMW that Ghost has always included for rack protection on all three sides of the clasp.

Important: This version of the Return Roller J-Cups is paired with a set of 5/8” mounting pins, making them compatible with any Rogue Monster Lite Series rig or rack. This same design is also sold separately with 1” mounting pins for use with Rogue Monster units.

COMPARING FEATURES OF PREMIUM VS. STANDARD RETURN ROLLER J-CUPS


StandardPremium
Mounting PinPowder-coated Steel with 5/8" standard black bolt as the Roller Axle.
Stainless Steel with 5/8" Stainless Steel Shoulder Bolt as the Roller Axle.
Roller OptionsBlack Composite. Durable and easy on your bar’s finish. Will wear a bit over time, especially if used in a high-volume gym, but can be replaced.
Medium Carbon Steel - Hardened and Silicone Carbide Coated. Extremely strong and durable; won’t need replacing, but will gradually wear the knurling of barbells.
Finish OptionsTexture Black Powdercoat
Medium Gloss finish in a range of color choices: Black, Gun Metal, Dark Red, Burnt Orange, Rogue Red, Dark Blue, Bright Green, Bright Blue, Light Gray, White, Clear and Matte Black (Note: All color finish options come with a stainless steel pin. The stainless steel pin is not plated and therefore machining marks may be visible.)
Gear Specs

Specifications:

  • Made in the USA
  • Sold as Pair
  • Patented Design: US #11,241,602 B2
  • Dimensions: 7 x 8.25 x 10.5 inches
  • Weight: 22 LB
  • 5/8” Pins - Compatible with Rogue Monster Lite Series units
  • Protective UHMW Lining on Front, Back, and Lip
  • Composite or Silicone Carbide Coated Steel roller construction
  • Finish: Texture Black with Texture Black pin or Medium Gloss Color with Stainless Pin
  • Ghost Strong branding


See Also: Rogue Monster J-Cup Pairs

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Key Features of the Return Roller J-Cups 2.0

Ghost Strong’s Patented Roller
1

Ghost Strong’s Patented Roller

Compared to the wider landing area of a traditional J-cup, roller-style J-cups are designed to immediately catch and guide a racked barbell into a more narrow, secure position, preventing unnecessary jostling of the cup or friction on the bar. Ghost Strong’s design, devised by Tim Grissel, goes even further than other roller J-cups on the market, as the patented conical rollers and multi-radius concave receiver ensure each racked bar returns to the front of the J-cup in an optimal position for the next lift, with reduced risk of accidental contact during a workout and much easier centering of the bar before lift off. Rogue has adapted this design with several new manufacturing upgrades to produce one of the most precise and dependable J-cups on the market.

Customizable Design
2

Customizable Design

There are a range of customization options available with the Return Roller J-Cups 2.0. At an added cost, the standard composite roller can be replaced with the Premium model and its extremely durable Silicone Carbide Coated Steel roller.* The standard texture black finish can also be upgraded to a premium medium gloss finish in nearly a dozen different colorways; great for matching the J-cups to a gym’s existing color scheme (all color finishes also come with a stainless steel pin rather than powdercoat). 

*Please Note: The steel roller is built to last a lifetime, but it will gradually wear the knurling of barbells more than the composite option.

Recommended Products

Reviews

1 - 8 of 29 Reviews
Buffalo NY
★★★★★
★★★★★
4 weeks ago
Questionable fit
I am still working on getting these to fit my RML3 rig that I bought in 2018- sadly the original set is too small with the plates and still too small with the kit they sent- would like to make it work. Will addend the review if we find a work around but super sad they are not usable yet
Yes, I recommend this product
Helpful?
Yes · 0
No · 0

Response from Rogue Fitness:

3 weeks ago
We'll continue to work with you on this until your j-cups are sitting flush on your rack. We apologize for the disappointment thus far.
BradBrantley
Ellsworth AFB, SD
★★★★★
★★★★★
April 21
Good j-cups, too tight for my rack
I got a set of these j-cups with my 490C Charcoal edition and they are super solid. I’m actually having the opposite issue of most of the reviews here… my set of cups are so tight that I have to bang on them with a dead blow hammer to get them to seat all the way. I’m hoping that they will wear in a little bit and loosen up without damaging the finish on my rack. Moving the cups up and down will get tiresome if they don’t wear in. Otherwise, they are solid, a great idea, and the hooks themselves are nice and smooth.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0

Response from Rogue Fitness:

April 26
We can help to get your Ghost J-Cups fitting better on your rack. The team has reached out.
Tyson M
Delaware, OH
★★★★★
★★★★★
February 20
Great Product, Understand your Options
This is a great product; I recommend fully reading Rogue's Description and Reviews to make sure you understand what options will work best for you when ordering. As such, I wanted to provide some detailed feedback on my purchase. I have a Rogue Monster Lite Wall Mount rack in Rogue red. One thing that attracted me to these J-Cups is the built-in protection to ensure your rack does not chip or dent since I paid extra for the fancy paint job. I owned the J-Cup and J-Cup 1" sandwich versions before Rogue added rack protection. I used Plastidip previously to help prevent wear and tear with moderate success. These are very solid; the stainless steel pin makes them slide effortlessly when repositioning. Like other reviewers, I had one that fit perfectly snug and one that sat a little loose on the rack. I opened a ticket with Rogue Support, and they immediately sent out a plastic replacement kit with three size options that replace the rearmost guide support and some shims to use if needed. This fixed the problem immediately. (Some feedback to Rogue: putting little size markers on the rear of the plastic components would have made identifying the sizes a little easier.) I purchased the steel rollers; again, as other reviewers have stated, the trade-off is either cleaning the plastic off your bar or having marks on your bar. Not spinning the bar while racked is just not something you will ever do. I have a Rogue red Ohio bar; I plan on buying a stainless steel bar to use with these J-Cups and use the red one for deadlifts, etc. In the meantime, I bought a roll of APT's 3" UHMW (Ultra-high Molecular Weight) Polyethylene Tape from Amazon. It doesn't look too bad, and it resists the abrasion when the bar rolls in the cups. The way it sits in the cups, you only need to cover 3" to protect your bar when sliding from side to side. The portion where the bar rests on these cups is a little shallower than what I was used to with the 1" sandwich version, and the bar does automatically reseat itself in the forward position, which I really like. Overall, it's a great product; the shim fix from Rogue should get everyone back on board with this being a 5-star product.
Yes, I recommend this product
Helpful?
Yes · 6
No · 0
Pablo J
★★★★★
★★★★★
February 14
Great fit and finish
After reviewing all the online reviews, I began to realize that most popular ones were 1-2+ years ago. These hit that sweet spot of features, quality and price. Glad I did because these are awesome. Game changer from your standard J-cups. The rollers really do improve the functionality of your rack and impact every exercise using a barbell. If you are looking, go for it. You will not be disappointed.
Helpful?
Yes · 2
No · 0
Debwil6
Camas WA
★★★★★
★★★★★
February 3
Poor fit
I purchased these to replace stock j hooks that were loose on my rack, sad to say that these are also very loose, top leans forward and pin barely making thru 3x3 upright. Love the concept of these just need to get the fit right.
Helpful?
Yes · 1
No · 0

Response from Rogue Fitness:

February 8
We'll make sure we get these snug to your rack. We have a fix on the way to you now.
Old Guy 40s
Minneapolis
★★★★★
★★★★★
January 11
Slick Idea/But Sloppy
I bought this a while back and never really paid close attention to specific quality. I noticed some slack, but kinda shrugged it off, but then the peg slipped through the hole on me just after racking my SSB after a squat. It caused the bar to slip off of the J-Cup and dump the weights off of one side. Luckily it was only 300lbs and only caused minor issues. I wish it was a bit more solid, especially considering the price. I’ve purchased many Rogue products. This is really the first one I’ve been somewhat disappointed with.
Ghost J-Cup
Helpful?
Yes · 2
No · 0

Response from Rogue Fitness:

January 15
Thanks for posting a review about this! We have a kit we will send you ASAP to get the fit of your Ghost J-Cups tighter to your rack's upright.
apex_jim
nc
★★★★★
★★★★★
Nov 2023
Still a gap at the top?
Bought the $325 version for hopefully best fit.. and quite a bit disappointed. In my opinion , this product needs to start using the 'sandwhich' design and clamp above as well as below the pin.
Gap at the top...
Helpful?
Yes · 3
No · 0

Response from Rogue Fitness:

Nov 2023
Thanks for posting about your Ghost Roller J-cups! The team has sent out a fix to get you squared away.
Superhiro
★★★★★
★★★★★
Oct 2023
Product damages sleeves
Been using this product for several months now. While the product works well with the rollers to center the barbell, the side welds damages your barbell sleeves if you don’t rack it perfectly centered. Several months in, my rogue Power Bar now has several gashes/divots on the sleeves. Really wish they would address this issue… overall I spent several hundred dollars for this product only to damage my barbell sleeves.
Helpful?
Yes · 7
No · 1
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery