Daily Shipping Deals

BUY 3 OR MORE 3 SHIPS FREE ITEMS AND THEY SHIP FOR FREE Shop Now

FREE SHIPPING ON SELECT ITEMS Shop Now

BUY A RIG* AND YOUR ENTIRE ORDER SHIPS FREE See Details

ORDERS OF $5K SHIP FREE See Details

Bearing Bars Guide

End Cap Loctite

Created Jan. 5, 2016 by Rogue

Download PDF Instructions
Download PDF

6 Steps
Moderate Difficulty

Tools Needed:
  • Loctite 648
  • End Cap Insert Tool
  • Pair Nitrile Gloves

Step 1 — Tools

Step 1 — Tools

  • Loctite 648
  • End cap insert tool
  • Nitrile gloves

Step 2

Step 2

  • Use the insert tool to insert the end cap (without loctite)
  • Make sure the end cap is easy to screw in, if it gets stuck remove and clean the threads with a brush
  • If the end cap is easy to screw in and out, remove end cap and go to next step.

Step 3

Step 3

  • Open Loctite 648 kit, snap tube neck below cap.
  • Apply (1) drop of Loctite to the threads on the sleeve
  • Rotate sleeve 180° and apply another drop of Loctite to the threads on the sleeve. Each sleeve should have (2) drops of Loctite on the threads.
  • Make sure you don't apply Loctite near the hardware. If you get it there, clean with a damp towel.

Step 4

Step 4

  • Grab end cap with one hand. Use other hand to apply a 1" bead of Loctite to the end cap. Make sure the threads are covered on side you install first.
  • Rotate end cap 180° and apply a second 1" bead of Loctite. Each end cap should have approximately 2" of Loctite.

Step 5

Step 5

  • Place end cap on sleeve. Use tool to screw end cap in place by rotating sleeve counter clock wise.
  • Make sure the end cap is screwed all the way in.

Step 6

Step 6

  • Use a towel to clean excess loctite around end cap.
  • Loctite will be fully cured in 24 hours.

If you have any questions or still need assistance, please contact Customer Service at (614) 358-6190 or [email protected]

Resistance training, gymnastics training, and activities at height are potentially dangerous and may lead to severe injury or even death. Use common sense when training, to obtain instruction in the proper execution of movements, and understand your limitations. THis equipment must only be used bt competent and responsible persons, or under the direct and visual control of a competent and responsible person. Obtaining instruction in appropriate techniques and methods of use is your own responsibility. You assume all risks and responsibilities for all damage, injury or death which may occur during or following incorrect use of this equipment in any matter whatsoever. Rogue Fitness bears no liability beyond the replacement value of the equipment in question.

Both Rogue Fitness and buyer disclaim any express or implied warranty, including, without limitaion, warranties or merchantability and/or fitness for a particular purpose with respect to the equipment. Buyer assumes all liability in use of equipment.