MIL Pull-up Station

★★★★★
★★★★★
4.9
23 Reviews
Made in U.S.A.

MIL Pull-up Station

★★★★★
★★★★★
4.9
23 Reviews
Made in U.S.A.
$465.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight146LBS
Height93"
Foot Print48" x 67"
Steel Notes2"x3" 11 Gauge Steel
Product Description
Gear Specs
Shipping
Product Description

The Rogue MIL Pull-Up Station is built to the required specs of the Army Combat Fitness Test’s “Leg Tuck” event, with an extended width of 62” between the two uprights to create ample operating space for any size athlete (in the Leg Tuck, the athlete uses an alternating grip, and their body is perpendicular to the pull-up bar). Because this unit also includes the same 2x3” 11-gauge steel tubing and standard single pull-up bar (1.25” diameter) as our R-Series squat racks, it can serve as a dedicated pull-up station for any traditional gym set-up, as well.

Read More

MIL Pull-up Station
MEETS THE STANDARD FOR USE IN THE NEW U.S. ARMY COMBAT FITNESS TEST (ACFT)

The Rogue MIL Pull-Up Station is built to the required specs of the Army Combat Fitness Test’s “Leg Tuck” event, with an extended width of 62” between the two uprights to create ample operating space for any size athlete (in the Leg Tuck, the athlete uses an alternating grip, and their body is perpendicular to the pull-up bar). Because this unit also includes the same 2x3” 11-gauge steel tubing and standard single pull-up bar (1.25” diameter) as our R-Series squat racks, it can serve as a dedicated pull-up station for any traditional gym set-up, as well.

The MIL Pull-Up Station has a total footprint of 48” x 67” and an upright height of 93”, with the pull-up bar position adjustable from 90” down to 86”. All required 5/8” hardware is included, as is an attachable step (connected via detent pin) that can be set at either 18” or 24” from the ground—matching the step heights on the Army’s Climbing Pods. This step also contains a large rubber insert that covers all metal edges for added safety.

The entire stand is finished in a texture black powdercoat, except for the removable step, which has an MG Rogue Red finish for stand-out visibility. The rear crossmember tube features laser-cut Rogue branding.

Please Note: The MIL Pull-up Station is not designed to be used as a squat rack. J-Cups are not included and the unit does not feature J-Cup mounting holes.

See More: Pull-Up Systems Available from Rogue

Gear Specs

Specifications

  • Made in the USA (imported rubber)
  • 2x3” 11-gauge steel construction
  • Unit Weight: 146 LBS
  • Height: 93” (clear for minimum 8 foot ceilings)
  • Foot Print: 48” x 67”
  • Single Pull-Up Bar - 1.25” diameter, 62” length, adjustable height from 86” to 90”
  • Black Powdercoat Finish
  • Laser-Cut Rogue branding
  • Attachable Step w/Detent Pin and Rubber Insert + Rogue Red finish, adjustable height from 18” to 24”
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Frequently Bought Together

Pricing for Both Items

Total Price
$555.00

1

Equipped for the ACFT

While the MIL Pull-Up Station can be used as a standard, dedicated pull-up stand for any gym, it’s also uniquely optimized for performing the Leg Tuck movement; Event 5 of the Army Combat Fitness Test. The extended length of the pull-up bar, at 62”, is roughly a foot longer than the bar on our standard Infinity Racks. This creates more space for performing the Leg Tuck movement, in which athletes utilize an alternating grip and position their bodies sideways / perpendicular with the bar.

2

Quality Rogue Construction

Built for stability and long-term durability, these 93” tall units are manufactured in the USA using 2x3” 11-gauge steel tubing + imported rubber for the attachable step. All required 5/8” hardware is included, and both the single pull-up bar (86” to 90” height) and step (18” to 24”) are conveniently adjustable. The stand is finished in a black powdercoat with laser-cut Rogue branding on the rear crossmember tube. The removable step, meanwhile, has an MG Rogue Red finish and a protective rubber insert for its metal edges.

Recommended Products

Reviews

1 - 8 of 23 Reviews
nightdog
San Francisco Bay Area
★★★★★
★★★★★
1 month ago
Terrific equipment
This is a very strong, sturdy, heavy piece of exercise equipment. It’s been a pleasure to use. Very happy with my purchase. While a second pair of hands would have been helpful, I was able to assemble it by myself pretty easily. The only tricky part was the crossbar, which I thought I’d have to call a friend over to help with until I noticed that the ends could rest inside the tops of the hollow uprights. Rest both ends of the crossbar on the uprights in this way, then lift one end of the crossbar at a time and attach it to its upright. With that insight, I was able to assemble the whole thing by myself pretty easily in less than an hour.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
The guayabera man
Coral Gables,Florida
★★★★★
★★★★★
1 month ago
The quality STRENGTH is obvios. MADE in the USA !
My pull-up station was shipped at once.. Packing A1,. Putting it together and raising it simple. This set is SOLID.!.I love it more because it is MADE in the USA.This is so important. Especially now.Just remember this. "A country is as powerful as what it manufactures". I know that any other pull up bar is inferior and flimsy compared to ROGUE. I even like the name of this company.. Really like the width of the bar..The wider grip really helps in doing optimal pull ups. Love the protective coating to rust proof the set. Feels really good to grip.I have no doubt that I purchased the absolute best pull up bar on the planet.
Yes, I recommend this product
During my photo shoot did a couple of pull ups.
Helpful?
Yes · 2
No · 0
fb15
California
★★★★★
★★★★★
2 months ago
Review
I bought this system a month ago and it is sturdy. I’m 5’11 and my feet just barely don’t hit the ground when I do kipping movements. You can do muscle ups but you need to have offsetting weight on the base. I have about 200 lbs of weight to keep it from wobbling.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
johhnyking24
Anaheim, CA
★★★★★
★★★★★
4 months ago
Very Sturdy
Amazing finish! The pull up station holds up when I do muscle ups. Highly recomend if your looking for a pull up station.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Cubanicknamewasinuse
★★★★★
★★★★★
4 months ago
Overall Great Construction
Easy to follow assembly instructions. Sturdy, stable and good general height for a pull up bar. Able to do leg tucks with more than enough space.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Gerard1
San Jose, Ca
★★★★★
★★★★★
6 months ago
More than expected
This is by far my favorite piece of equipment. I’m writing this review to give a tip for others. The 5/8” holes allow for band pegs. The extra width of this thing has allowed me to use these bands just like cross over cables. You don’t get the same width from a half rack like the HR-2. I’m able to perform clean high and low flies with bands and properly isolate my chest, just like the cables, using other anchors, it always just felt off and I could tell I wasn’t isolating. Plus mixing in rings and rope from the bar, you get so much out of this piece of equipment.
Yes, I recommend this product
Helpful?
Yes · 5
No · 0
hangeron
Toronto
★★★★★
★★★★★
6 months ago
Good solid pullup bar
The pull up station is stable vertically. There is a slight wobble when force is applied laterally. It requires 2 wrenches to assemble.
Yes, I recommend this product
Originally posted on roguecanada.ca
DL 600
★★★★★
★★★★★
6 months ago
Multipurpose rig.
Fantastic product. Able to do strict and butterfly pull-ups and bar muscle ups. Able to hang rings and do ring dips. Thank you!
Yes, I recommend this product
Helpful?
Yes · 6
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery