Rogue Vertical Bar Hanger

★★★★★
★★★★★
4.6
143 Reviews
Made in U.S.A.

Rogue Vertical Bar Hanger

★★★★★
★★★★★
4.6
143 Reviews
Made in U.S.A.
$45.00

Gear Specs

BrandRogue Fitness
Made In USAYes
Product WeightTriple Bar - 6LB
Single Bar - 3LB
LengthTriple Bar - 12"
Single Bar - 6"
Width4.25" (depth)
Height3"
Steel Notes0.1875" thick laser cut and formed steel
Other Product SpecsProtective UHMW plastic layer
Infinity CompatibleYes
Monster Lite CompatibleYes
Product Description

Vertical Barbell Storage Gets Elevated

Available as a single-bar or triple-bar storage accessory, the compact Rogue Vertical Bar Hanger is made in the USA from 0.1875" thick laser cut and formed steel, with a Protective UHMW plastic layer lining. Rather than sliding a barbell sleeve-first into a tube on the floor—like most standard vertical bar holders—this unit allows you to set up a wall-mounted or rack-mounted hanger that can store your bars efficiently above the ground, limiting the risk of any wear and tear during regular stowing and removal.

Read More

Rogue Vertical Bar Hanger

Vertical Barbell Storage Gets Elevated

Available as a single-bar or triple-bar storage accessory, the compact Rogue Vertical Bar Hanger is made in the USA from 0.1875" thick laser cut and formed steel, with a Protective UHMW plastic layer lining. Rather than sliding a barbell sleeve-first into a tube on the floor—like most standard vertical bar holders—this unit allows you to set up a wall-mounted or rack-mounted hanger that can store your bars efficiently above the ground, limiting the risk of any wear and tear during regular stowing and removal.

The UHMW lining helps prevent any harsh contact with the bar’s collar when you set it on the hanger, and additional Protective UHMW plastic layer on the edge of the unit keeps each bar stabilized and secure when not in use.

The rack-mounted version of the Rogue Vertical Bar Hanger comes with all necessary hardware, and is intended for use only with Infinity or Monster Lite Series rigs and racks. For owners of a Rogue Fold Back Rack, the Vertical Bar Hanger is particularly versatile, as you can still store your bars on the outside of one of the panels when the rack is folded in. The Vertical Bar Hanger is NOT recommended for use with specialty bars and the Rogue Beater Bar.

Please Note: The wall-mounted version of the Vertical Bar Hanger does NOT come with hardware. The mounting holes are 0.375" in diameter, so we recommend using 0.3125" diameter hardware.

Gear Specs

Specifications:

  • Made in the USA
  • 1-Bar and 3-Bar storage options
  • 0.1875" thick laser cut and formed steel construction
  • Wall-Mount or Rack-Mount (compatible with Infinity or Monster Lite racks/rigs)
  • Mounting Hardware included ONLY for rack-mount version
  • Protective UHMW plastic layer
  • Depth: 4.25" (depth) extension from mounting area
  • Length: Triple Bar - 12"
    Single Bar - 6"
  • Height: 3"
  • Mounting Holes - Wall-Mount Single Bar Holder: 4" on Center
  • Mounting Holes - Wall-Mount Triple Bar Holder: 10" on Center Horizontally, 1.25" on Center Vertically
  • NOT recommended for use with specialty bars or the Rogue Beater Bar


See More: Barbell Storage Options Available from Rogue

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Recommended Products

Reviews

1 - 8 of 143 Reviews
Roszko
Tucson
★★★★★
★★★★★
5 weeks ago
Organization Is Key
Easy to install and looks very clean. Cleared up some room in the garage gym. High quality as always.
Yes, I recommend this product
Three Bar Hanger
Helpful?
Yes · 0
No · 0
fraschumi
Zurich
★★★★★
★★★★★
April 2
Excellent product
I bought it to store my barbell and two dumbells on the wall instead than on the floor. It does its job perfectly, small footprint, sturdy, nice looking. What else? Definitely recommended!
Yes, I recommend this product
Originally posted on rogueeurope.eu
Imran Qureshi
Waterloo, ON
★★★★★
★★★★★
February 14
Excellent quality Vertical Bar Hanger
I got this with other stuff to set up my Rogue home gym. I love it and have been happy with its quality. While the description clearly states no included hardware but I will recommend charging an extra dollar or two and providing the bolts or screws. This will save customer's from reaching out to customer support.
Yes, I recommend this product
Originally posted on roguecanada.ca
HawkeyeGym
Naperville, IL
★★★★★
★★★★★
January 28
Falls Short of Expectations
I own the error in ordering this. The specs are provided. Read them. You aren’t mounting this to the wall unless you visit the hardware store. You will need to pick up a 2x4 that measures 20+ inches so you can sandwich it between the wall and the hanger. And you will need to grab hardware. Again, I own the error. I didn’t read the specs, because honestly I’ve been so satisfied with Rogue that I’ll pretty much buy anything they make and trust they’ve done it right. They pretty much get it right all the time. But not this one. Make it 22-24 inches with proper stud mounting of 16 inches. Add a 4th bar mount. Provide hardware. Charge $20 more and save me the hassle of ‘making it work.’
Helpful?
Yes · 24
No · 2
hilld
Portland Metro Area
★★★★★
★★★★★
January 9
Overall very nice, but could use improvements
The wall mount version comes up a bit short. Most homes in the US are either framed with 16" OC studs, however, lately newer homes are being framed 24" OC (especially garages). The reason for this is to reduce thermal bridging and increase the amount of insulation. But that brings up a different problem on how to properly mount the wall mount version of the barbell hanger. The wall mount version should accompany either 16 or 24" OC stud layout, be it perhaps with a 4 or even 5 bar setup. Let the user decide what they need. I would rather than have to install an additional cleat to bridge the studs to then have to mount the hanger on it. I am trying to mount as close the wall as possible and not have the bars intrude into my space anymore than necessary.
Helpful?
Yes · 3
No · 0
Bwheeler
Alberta, Canada
★★★★★
★★★★★
Dec 2022
Great space saver
Purchased this for my home gym as I had bars all over the place. I didn’t realize how much room it saved me. Fast install and great quality.
Yes, I recommend this product
Originally posted on roguecanada.ca
★★★★★
★★★★★
Sep 2022
Not super functional as own unit
No mounting hardware to attach to wall or rack and doesn’t have the ability to mount to studs without purchasing your own stringer or using a piece of wood to create your own
Helpful?
Yes · 9
No · 3

Response from Rogue Fitness:

Sep 2022
We note on the page that hardware is not included and are very sorry if this was missed. This allows you to choose the type of hardware you need specific to your mounting surface.
Joseph1204
Ontario Canada
★★★★★
★★★★★
Aug 2022
Simple design but a true space saver!
Simple product, but space saver 100%! Super happy with it.
Yes, I recommend this product
Originally posted on roguecanada.ca
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery