Add to Registry
Please choose the registry you want to add this product to:
Squat Stand Wheel Bracket Set is rated
out of
5 by
16.
Rated 5 out of
5
by
Gamma from
Deal Maker
Without these, there was no way for me to have the SL-2 in the Garage. These wheels make it possible; I can roll the rack all the way to the back of the garage to park, then wheel it forward to work out. The rack is heavy but manageable. This is a brilliant accessory.
Date published: 2021-01-08
Rated 3 out of
5
by
Chooey from
Well made, but effectiveness is questionable
Bought this with my SML-1 rack out of impulse, but also wanted to see how well this works... and it kinda doesn't.
Product is very durable and well made, as expected from Rogue.
I was a bit disappointed because I tried to see how useful it was on my rack and it was just as easy for my buddy and I to just each grab a post and slide the rack around vs. tilting it and rolling it.
By the way, IDK who has long enough wingspans to grab each post on their own, so even with wheels, you'll likely need another person to grab each post, tilt it, then roll it. I suppose if you have to move it quite some distance (garage to driveway) or something, then rolling it would be worthwhile.
Date published: 2020-12-06
Rated 4 out of
5
by
Tanner D from
Wheel set
I have my wheels on a mat floor so it doesn’t work as well. Also, I have a half rack and a conversion kit so I needed to get a longer bolt for them to all fit. Otherwise, it’s a nice addition onto the stand. It definitely helps move the rack when I need to.
Date published: 2020-11-25
Rated 5 out of
5
by
Mcpower from
Must have
Great for moving rack in garage. Well constructed.
Date published: 2020-10-10
Rated 3 out of
5
by
London138 from
Don't work or me
Firstly, this isn't an installation issue. I contacted rogue in advance of purchase and asked about the bolts being to short - as is mentioned in previous reviews. They said to remove the washers because the wheel plate acts as a washer (this information should probably be included in the write up). Anyway I followed Rogue's advice and the wheels attached without a hitch. My issue is that my SML-1 rolls on the concrete area in my basement but dig into my rubber gym tiles. I think the suitability of these wheels for different surfaces should be made clear. Finally, only one of the two wheels rolls freely and the installation scratched them up so its unlikely i'll return them. Quite disappointed. This isn't a knock on Rogue generally. I have many Rogue products which I love and will continue to be a loyal customer.
Date published: 2020-08-30
Rated 5 out of
5
by
Chris99 from
Perfect
I have to more my Squat rack around a lot and the wheel bracket set is solid and perfect for doing this.
Date published: 2020-08-14
Rated 3 out of
5
by
Rocky78 from
I should have read the reviews
Do not install these wheels without buying longer bolt similar to the ones that you are replacing.
I see that some people are confused and tried to reuse the bolts that come with the stand. They will only thread halfway into the bolt while using the lock washer.That configuration can lead to a catastrophic failure of the stand while in use, and is not safe. The kit should have priced in the longer bolts as they are required.
You will spend $45 more for the bolts and nut.
You will end up moving it with the J hook for short moves and tilt it back easily to roll along the garage as needed.
Date published: 2020-05-25
Rated 5 out of
5
by
j314159 from
Essential if you move your squat stand, and...
The wheels work well and seem essential for moving the squat stand. My only problem was that with the wheel bracket added, the bolt is not long enough to use the washers that are included with the squat stand. It would be helpful to provide advice for this in the assembly instructions.
Date published: 2020-05-19
© 2010-2021 Rogue Fitness. All Rights Reserved.