Daily Shipping Deals






Rogue MLW-20 - 20' Monster Lite Wall Mount

Concrete Anchor Kit for 20' Wall Mount
43" Dirty South Bar - Substitute

Can only be used as a substitute when purchasing an Infinity/Monster Lite rig, rack and/or squat stand

70" Dirty South Bar - Substitute

This substitute is priced for purchase with an Infinity or Monster Lite rig only

Free Shipping Item

This Item Ships For Free

Cont. US 48 Only

An efficient alternative to the standard Monster 20-foot Rig, Rogue’s Monster Lite Wallmount Rig still delivers all the power and peace of mind that comes with 3x3" 11-gauge steel, but in a design that saves both money and square footage.

With an overall footprint of 20'x6’, the Monster Lite 20-foot Wall Mount Rig provides up to six new pull-up stations and two easily adjustable bench rack / squat rack areas. And because it bears the Rogue name, the Monster Lite is strong enough for the intensity of CrossFit and customizable to the schematics of any gym or weight training center with a well reinforced concrete or cinder block wall.

Though very similar to the standard Rogue Monster Wallmount Rig, the Monster Lite uses 5/8” bolts and fasteners instead of 1”. As a benefit of this, the crossmembers of the Rogue Infinity Rig series can be used with the Monster Lite series.

MLW-20 Rogue 20’ Monster Lite Wall Mount Specifications:

  • Made in the USA with 3x3” 11-gauge steel
  • Repeating 4’-6’-4’ sections
  • 5/8” bolts and fasteners
  • Pull-up Bar height is adjustable - 8’, 7’ 6” or 7’
  • Includes (5) 108” uprights (144” also available)
  • (2) sets of Monster Lite J-cups with UHMW plastic inserts
  • (2) X-43 Parallel crossmembers (same as Infinity Series)
  • (7) X-70 Parallel crossmembers (same as Infinity Series)
  • Unit must be bolted to the floor. Concrete anchor kits available.
  • Unit must be bolted to the wall. Wall mounting hardware is NOT included.

Gear Specs

Brand Rogue Fitness
Color No
Product Weight 477lb
Length 20'
Width 6'
Height 9'
Foot Print 20'5" x 6'3"
Material Type Powder Coated Steel
Steel Notes 3" x 3" 11 Gauge
Made In USA Yes
Free Shipping Yes
3 Ships Free No
Rogue MLW-20 - 20' Monster Lite Wall Mount is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from MLW-4 Perfect for Garage Gym The Rack is rock solid and top notch quality. Couldn't be happier. If you are not on a concrete wall and have to mount to dry wall, the rack is not the right dimension to pick up the studs. I attached a drawing using 15-3/4 shelf board cut to 74" length that picks up studs to give a solid mounting surface for the rack. Hope it helps.
Date published: 2014-12-22
Rated 5 out of 5 by from Excellent Rig I just purchased this over the Black Friday/ Cyber Monday sale, saved a ton of money. Shipping was very fast, everything was secured and arrived undamaged. This rig is stout! Very happy with my purchase, garage gym looks awesome.
Date published: 2014-12-10
Rated 5 out of 5 by from Perfect for the garage gym This thing is a monster, perfect for the at home box. Right down to the packaging Rogue didn't over look a spec. on the MLW-4. Far exceeded my expectations, a must have for any garage gym. Assembly of the rig itself took less than 30 minutes.
Date published: 2014-10-15
Rated 5 out of 5 by from Pull up Options I've been looking at this rack for a while and finally pulled the trigger....needless to say, outstanding product, but you already know that. With free shipping it was only $30 more than the infinity wall mount! For delivery be ready for UPS to roll up with a semi truck! What I did different....you can customize this bad boy free of charge. Rather than have 3 cross members with the standard 2 bars each. I added a single fat bar, single skinny bar, and a 3x3 crossmember to which I added the "3 inch pull up spheres". It's still solid as a rock and I have 3 different pull up options now.
Date published: 2014-10-09
Rated 5 out of 5 by from Awesome Product I ordered the MLW-4 and it arrived, I think even before I received the confirmation email, which was sent, hmmmm, immediately. The point is, that it arrived super fast. Fixing the uprights to my concrete floor was kind of a pain because drilling into post tension concrete slabs is moderately challenging, especially if you don't have a legible blueprint of the post-tension cable grid. Buying a good hammer-drill and masonry bit was key to my success and eased the pain of drilling the holes. My biggest mistake was not ensuring my drilled holes were perfectly straight, so dropping my anchors were kind of tricky. Now, if all of my pre-installation steps (drilling holes, and preparing the wall for the wall-mount side) were efficiently done then the actual installation process would have been an ease. Heck, it's 5 parts in entirety so the assembly was a cinch. I run a small HIIT gym out of my 700sqft garage and I have 3 people doing all sorts of pull-ups, ring dips, etc. on the rack at a time, and that thing doesn't move, sway, dip...nothing. I'm expanding my gym and will be buying the mlw-10 in the near future. As usual, this is another solid Rogue piece of equipment.
Date published: 2014-05-21
Rated 5 out of 5 by from Great Equipment I purchased the MLW - 4 in my 3rd bay garage. I love the versatility of it, pull ups, bench, squats, plus other accessories can be added. It is fantastic and accommodates short guys like me (with the many milled holes all around). I would highly suggest this item for anyone that may have doubts. Good, solid, easy to assemble, great value for price, you can't go wrong with Rogue.
Date published: 2014-05-16
  • 2016-02-07T06:57CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_XX6261, PRD, sort_mostRecent
  • clientName_rogue