Rogue Monster Rhino Trainer
Rogue Monster Rhino Trainer
Couleur(s) (13)*Rogue Red
Hauteur*
Profondeur du rack*
Type de rack*
Type de modèle*
Ajouter des linceuls ? (Noir texturé)*
Front Pull-up Bar: (6)XM-431 Monster 43" Single Pull-up Bar
J-Cup: (4)Monster Standard J-Cup Pair
Safeties: (3)None
Lat Bar (2)Lat Bar
Dresseur de rhinocéros monstres rebelles AccessoiresOptions disponibles (10)
Caractéristiques | |
| Marque | Rogue Fitness |
| Couleur(s) | Couleurs variées |
| Fabrication aux États-Unis | Oui, avec des poulies importées |
| Longueur | Varie en fonction de la profondeur du rack |
| Largeur | 53" |
| Hauteur | 92" ou 102" |
| Surface au sol | Varie en fonction de la profondeur du rack |
| Acier | Crémaillère : 3 x 3 po en acier calibre 11 Plaques de poulie : 1/4 po en acier Rail chargé par plaque : 3 x 6 po en acier calibre 11 |
| Type de câble | Câble d'avion Mil Spec de 3/16" fabriqué aux États-Unis |
Description produit
Upgrade your training space with the Rogue Monster Rhino Trainer, allowing you to get the most out of your Rogue Monster Rack. Designed around the Rogue Monster Rhino Belt Squat, the Rhino Trainer is available in two different versions.
Rhino Rack Trainer
The Rack Trainer version includes the Rhino Belt Squat and a 1:1 lat pulldown and Low Row.
Rhino Functional Trainer
The Functional Trainer version adds a 2:1 functional trainer in addition to the Rhino Belt Squat and 1:1 lat pulldown included on the Rack Trainer version.
Like the original Rhino Belt Squat, both versions utilize a 1:1 pulley ratio from a single weight source, meaning no special attachments or reconfiguration is needed when switching from belt squats to lat pulldowns and low rows.
Secure your legs for lat pulldowns using the optional Monster Multi-Use Rack Roller or add our Doghouse attachment for the ability to do box squats.
Lire plus
Rogue Monster Rhino Rack Trainer
Upgrade your training space with the Rogue Monster Rhino Trainer, allowing you to get the most out of your Rogue Monster Rack. Designed around the Rogue Monster Rhino Belt Squat, the Rhino Trainer is available in three different versions.
RHINO RACK TRAINER
The Rhino Rack Trainer combines the Rhino Belt Squat with a 1:1 ratio lat pulldown and low row, powered by a single plate-loaded weight source. This setup delivers multi-purpose lower and upper body training in a compact setup.
Rhino Functional Trainer
The Rhino Functional Trainer builds on the Rack Trainer by adding a 2:1 functional trainer to the existing Rhino Belt Squat and 1:1 plate-loaded lat pulldown and low row, all powered by a single plate-loaded weight source. It expands training capacity while maintaining a consolidated footprint.
Rhino + INDY Functional Trainer
The Rhino + INDY Functional Trainer combines the plate-loaded 1:1 lat pulldown and low row with the Rhino Belt Squat, and adds 2:1 independent 300LB weight stacks for the front trolleys. This configuration provides smooth, balanced resistance and fast adjustments, with a total functional resistance feel of 150LB per side.
Like the original Rhino Belt Squat, both versions utilize a 1:1 pulley ratio from a single weight source, meaning no special attachments or reconfiguration is needed when switching from belt squats to lat pulldowns and low rows. The new removable Low Bracket and Footplate further expand functionality, enabling smooth low row transitions, while the optional Monster Multi-Use Rack Roller offers added support for lat pulldowns.
GRANDFATHER CLOCK TENSIONING SYSTEM
(Patent Pending)
Because squats start from the top, rather than the bottom of the lift, the Rhino trolley also needs to start at the top of the range of motion. While this is easy in an open ended design like the Rhino Rack Trainer, for a closed loop, single-weight-source, multifunction cable system like the Rhino Functional Trainer, a new mechanism was required to make it possible to start most lifts from the bottom of the trolleys range of motion and then allow squats to start from the top of the lift.
In order to maintain cable tension while the trolley is resting on the Rhino horn, a precisely calibrated counterweight descends using a patent pending apparatus consisting of multiple pulleys and cables, all internal to the 3x6 upright. When the lifter attaches the belt, the counterweight is retracted and lifting can begin as normal.
The system is so cool we added a window into the upright so you can see it in action.
INNOVATIVE PULLEY CONFIGURATION
The patent pending pulley configuration achieves a 2:1 ratio for the functional trainer and 1:1 for the lat pulldown and low row, using a single plate-loaded trolley. This configuration allows the user to seamlessly move between the lat pulldown, belt squat and trolleys without ever needing to reconfigure or attach/detach a carabiner. This also only requires only one weight adjustment in use. This single weight source design ensures even loading, eliminating any possibility of side-to-side imbalances.
COMPATIBILITY AND VERSATILITY
Unlike many competitor models that require proprietary, specialized attachments to be able to achieve a 1:1 load for lat pulldown and low row that bridge two cables, the Rogue Rhino Rack Trainer and Rhino Rack Functional Trainer are compatible with all standard cable attachments.
SURCONSTRUCTION PAR CONCEPTION
This unit is manufactured in Columbus, Ohio, and features 3x3" arms and crossmembers, a 3x6" weight trolley tower, and a 3/16” US made Mil spec aircraft cable. When not in use, the trolley is stored on a 1" thick UHMW plastic hook, or “Rhino Horn.” A diamond-tread plate platform provides steady footing, adjustable handles offer overhand and neutral grip options, and our exclusive Rogue Multi Belt (included standard) easily accommodates most waist sizes, with adjustments from 41” to 61”.
SEAMLESS TRANSITIONS
Transition to different movements on the Rhino Rack Trainer or Rhino Functional Trainer with ease. With our 1:1 pulley design in the Rack Trainer and the integrated 1:1 and 2:1 pulley system in the functional trainer there is no need to reconfigure your rack or cable attachment points when going from belt squats to lat pulldowns, 2:1 movements, or vice versa.
BUILT ON THE MONSTER RACK 2.0
The Rogue Monster Rack 2.0 is a fully customizable rack utilizing 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. The 2.0 version includes a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.
Caractéristiques
Caractéristiques :
- Produit fabriqué aux États-Unis
- Design en attente de brevet
- Can be dropped in to a 24”, 30”, or 43” Rogue Monster Rack section
- Ships Freight, Some Assembly Required
- Width: 53”
- Height: 92” or 102”
- Foot Print: 60"x53" (24” Depth RM-3 Rack), 66"x53" (30” Depth RM-3 Rack), 79"x53" (43” Depth RM-4 Rack), 106"x53" (RM-6 Rack)
- Height of Platform (from floor): 7”
- Extension of Unit from Uprights: 30.7”
- (2) Weight Posts with 15.75” loading capacity on each
- Unloaded Trolley Weight: 27.5LB (+/- 1LB)
- 3x3” Arms and Crossmembers
- E-Coat or Stainless Lat Bar, Grip Triangle, and Multi-Belt included (Functional Trainer version also adds 2 single handle cable attachments.)
- Cable: 3/16" US Made Mil Spec Aircraft Cable
- Includes 8 plate storage posts
Comparaison des racks
Monster Rhino Rack Trainer - Drop-In Gear Spec Comparison:
Select your Rack Height:
| Rack depth | 24" | 30" | 43" | 43"-24" RM-6 |
|---|---|---|---|---|
| Fabrication aux États-Unis | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys |
| Longueur | 60" | 66" | 79" | 106" |
| Largeur | 53" (no weight storage) | 53" (no weight storage) | 53" (no weight storage) | 53" (no weight storage) |
| Total Height | 92" | 92" | 92" | 92" |
| Surface au sol | 60"x53" | 66"x53" | 79"x53" | 106"x53" |
| Acier | Tubulure 3" x 3", grade 11 | Tubulure 3" x 3", grade 11 | Tubulure 3" x 3", grade 11 | Tubulure 3" x 3", grade 11 |
| Cable Travel | 62" | 62" | 62" | 62" |
| Compatible Monster | Oui | Oui | Oui | Oui |
| Rack depth | 24" | 30" | 43" | 43"-24" RM-6 |
|---|---|---|---|---|
| Fabrication aux États-Unis | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys | Yes - Imported Pulleys |
| Longueur | 60" | 66" | 79" | 106" |
| Largeur | 53" (no weight storage) | 53" (no weight storage) | 53" (no weight storage) | 53" (no weight storage) |
| Total Height | 102" | 102" | 102" | 102" |
| Surface au sol | 60"x53" | 66"x53" | 79"x53" | 106"x53" |
| Acier | Tubulure 3" x 3", grade 11 | Tubulure 3" x 3", grade 11 | Tubulure 3" x 3", grade 11 | Tubulure 3" x 3", grade 11 |
| Cable Travel | 72" | 72" | 72" | 72" |
| Compatible Monster | Oui | Oui | Oui | Oui |
Accessoires inclus
The Rogue Monster Rhino Rack Trainer comes standard with the following accessories:
Rhino Low Row Bracket and Footplate
E-Coat or Stainless Lat Bar
Standard Grip Triangle
Multi Belt
Single Handle Cable Attachment Pair (Functional Trainer Only)
Assemblée
Rogue Monster Rhino Trainer - Assembly Instructions:
FAQ
Livraison
Livraison rapide Rogue
Le système de suivi de livraison Rogue vous permet de suivre votre commande de notre entrepôt au pas de votre porte. Commandez aujourd’hui, commencez à suivre aujourd’hui.
Key Features of the Rogue Monster Rhino Rack Trainer
FULLY CAPABLE: RHINO BELT SQUAT, LAT PULLDOWN/LOW ROW, AND FUNCTIONAL TRAINER OPTIONS
Get more out of your rack by adding belt squat and lat pulldown/low row capabilities or opt for the functional trainer version and add adjustable height 2:1 swivel trolleys. Available as a drop-in for a 24”, 30”, or 43” section of a Rogue Monster Rack, the Rhino Rack Trainer transforms your home gym into a well rounded training space allowing for a wider range of exercises within a single compact unit, while maintaining the full functionality of your power rack.
MULTIPLE ACCESSORIES INCLUDED
Hit the ground running with your training using the included your choice of an E-coat or Stainless Lat Bar, Low Row Bracket Grip Triangle and Multi-Belt. Our Multi-Use Rack Roller attachment is also available to add even more functionality. If you opt for the functional trainer version, single handle cable attachments are also included. Explore the numerous exercises using the compact Rhino platform, from standing hamstring curls and leg extensions, to bicep curls and more.
NO RECONFIGURATION NEEDED
Our pulley configuration allows for a lat pulldown system to be added to our Rhino Belt Squat without having to reconfigure or attach/detach cables when changing movements, all while maintaining a 1:1 weight ratio, meaning you are lifting the exact weight you load on the Rhino trolley. The functional trainer version adds dual 2:1 adjustable height swivel trolleys that are also grab and go.
EXPANDED RANGE OF EXERCISES
Explore the numerous exercises available using the compact Rhino platform in combination with the optional Multi-Use Rack Roller Attachment, from standing hamstring curls and leg extensions, to bicep curls, wrist curls, hip thrusts, seated calf raises and more, all while maintaining the belt squat capabilities of the Rhino.
RHINO HORN
This is a 1" thick UHMW plastic horn, sandwiched between steel plates, that holds the trolley when not in use. The Rhino Horn is adjustable up and down so that the "racked" or resting height of the trolley can be accommodated to specific users heights.
1:1 WEIGHT RATIO (RHINO RACK TRAINER) 1:1 AND 2:1 WEIGHT RATIO (RHINO FUNCTIONAL TRAINER)
Integral to the design of the Rhino Rack Trainer is its 1:1 weight ratio, so the weight that is loaded on the trolley is the actual weight felt during the movement performed. This also uses a single weight source so you can use any standard cable attachment. The Rhino Functional Trainer and Rhino + INDY Functional Trainers add dual adjustable height 2:1 swivel trolleys while still being able to use standard cable attachments for both the 2:1 and 1:1 attachment points.
