Daily Shipping Deals





Monster Lite Short Plate Storage Post Pair

Monster Lite Short Plate Storage Post Pair

Short Plate Storage Posts - Monster Lite

This is the Monster Lite version of Rogue's Short Plate Storage Post—a practical, space-efficient addition to any Monster Lite Rig, Rack, or Squat Stand. Sold in pairs, these compact 5.75" pins add a combined 180LB of plate storage capacity without over-expanding a rig's wingspan. Includes all of the necessary 0.625" hardware for mounting the storage posts to a 3x3" Monster Lite upright.


  • Made in Columbus, OH, USA
  • Sold as a Pair
  • 5" usable post length
  • Steel Plate Storage Capacity (per post): 90LB
  • Bolted to Monster Lite uprights 6" on center
  • 0.625" x 4.5" hardware included


PLEASE NOTE: These weight storage posts are compatible ONLY with Rogue’s Monster Lite Series.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 6.5LB
Length 5.75"
Width 2"
Height 8"
Other Product Specs 5" usable post length
Monster Lite Compatible Yes
Storage Bumper Storage
Monster Lite Short Plate Storage Post Pair is rated 4.7 out of 5 by 7.
Rated 5 out of 5 by from Great plate storage Definitely sturdy as all Rogue products are. I can easily store multiple plates on the post. I opted to run the lock washer and nut on the inside of my RML-3W uprights to provide more room to store plates on the storage post. No more plates on the floor and changing out plates is convenient.
Date published: 2018-06-16
Rated 5 out of 5 by from Excellent feature I purchased these for two reasons. Two get my plates off the floor and add stability for swinging motions on the rack. I have an SML-2 squat rack with single pull-up bar and safety spotter arms. These add good storage and stability. In a compact space in my garage.
Date published: 2018-05-08
Rated 4 out of 5 by from Nice Addition to Rack Solid as all Rogue ML accessories are. Paper instructions that came with the product clearly picture the lock washer and nut on the storage post side so that they face any plates that are put on the post. But I felt that the bolt tip and nut was more likely to mar my bumper plates than the head of the hex bolt so I reversed it. From experience, I know that the lock washer can strip the powder coating when removed, so I decided to replace it with a flat washer and lock nut from the hardware store in case I decide to change where I mount the storage post. The other thing I did was coat the hex bolt head using "Plasti Dip" Spray. Pictures posted. This leaves a rubber like coating which I think will reduce the chance of marring the bumper plates. I put a 45 on the post and spun it. No marks on the bumper when making contact with the bolt head. The coating is thin though, so we'll see how it stands up to repeated racking of plates on the storage post.
Date published: 2018-02-12
Rated 5 out of 5 by from Excellent Holds plates; as it should. Wish I'd ordered the longer post pair as I was concerned with space. Solid product l.
Date published: 2018-01-01
Rated 5 out of 5 by from Great addition Really like these for change plates. One thing I’d like to see in the design is a counter sunken nut head as the bolts will mar the rubber coating on the change plates. I ended up putting small furniture pads on the ends of the bolts so now the plates hit a soft felt pad. No more scarring your plates! Still give them a five star!
Date published: 2017-11-08
Rated 4 out of 5 by from Small Issue First, the post has been installed incorrectly in one of your pictures, the nut and lock washer are to be installed on the post side. With the post installed correctly, there is indeed 5" of usable space, but this could be redesigned to give almost another inch if a flush mount was used.
Date published: 2017-06-30
Rated 5 out of 5 by from Perfect addition to my rig These are the perfect addition to my Infinity rig. Just the right size to hold my smaller plates. Each one comfortably fits 2- 10's, 1-5, and 1 2.5lb plate. There is enough room to additionally put my Rogue collars on it, but they will overhang the end post a little. As with all Rogue products, it is high quality steel, beautiful powder coating, and nice welds.
Date published: 2014-04-25
  • y_2018, m_11, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_XX12405, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue