Monster Rig 2.0

★★★★★
★★★★★
4.7
6 Reviews
Made in U.S.A.
Product Image

Monster Rig 2.0

★★★★★
★★★★★
4.7
6 Reviews
Made in U.S.A.
Free Shipping
Monster Rig 2.0
$2,250.00
Ships in 14-30 Days

Edition (3)*Base 2.0 Edition

Rig Length (4)*10'

Rig Color (1)*Satin Black

Rogue Rig Concrete Anchor Kit
$26.00

Gear Specs

BrandRogue Fitness
Made In USAYes
LengthVaries
Width6'
Height9'
Steel Notes3x3" 11-Gauge Steel
Monster CompatibleYes
Base Edition
Standard Edition
Racked Edition
Shipping
Base Edition

The fully redesigned Rogue Monster Rig, Standard Edition, introduces a wide range of new features, including your choice of 11 different color finishes.

Read More

The Base Edition of the Rogue Monster Rig 2.0 is available in four primary configurations (10’, 14’, 20’, 24’) with limitless expansion capabilities by 4’ and 6' sections. The unit comes with Monster X-43 and X-70 parallel pull-up bars in our traditional powder coat finish, and 108” uprights built from 3x3" 11-Gauge Steel with 1” holes.

We’ve maintained the unmatched rigidity of the original Monster upright while adding some new features, including easy-to-read, pin-position numbering and a laser-cut keyhole pattern along the sides—creating compatibility with more add-ons and attachments. All Base Edition orders of the new Monster Rig come in a Satin Black finish with bright zinc hardware. Additional upright color options are only available with the Standard Edition or Racked Edition Monster Rig 2.0.

Like all our racks and rigs, the Monster 2.0 is manufactured in Columbus, OH, and designed with space efficiency and customization in mind. One of these systems can instantly create between 2 and 6 squat/bench stations and 6-14 pull-up stations (see sizing breakdown below). The rig ships with all necessary 1” bolts and fasteners and Monster J-cups, and it’s compatible with an array of compatible Monster Series accessories, from Safety Spotter Arms to the Monster Matador, plate storage channels, the Monster Landmine, and many more.

US Patent D635,206, US Patent D636,038, US Patent D636,039, US Patent D636,040

Important: Unit must be bolted to the floor. All rigs come with sufficient hardware to configure the rig with all crossmembers at the same height. Alternating crossmember heights will require additional hardware.

*The satin clear finish is a transparent finish. This will show any blemishes or marks from the manufacturing process that are present in the steel.

Standard Edition

The fully redesigned Rogue Monster Rig, Standard Edition, introduces a wide range of new features, including your choice of 11 different color finishes.

Version 2.0 retains the unmatched durability of the Monster Rig's 3x3" 11-Gauge Steel uprights and oversized 1” hardware, while adding the convenience of new pin-position numbering and a laser-cut keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments. We’ve also swapped in 3x3” beams at the top of each rig section for added rigidity, and updated the 70” pull-up bars with a new pass-through gusset for more height adjustment positions and optimal stability. New laser-cut Rogue branding panels with stainless backing plates also come standard on all sizes.

The Monster Rig 2.0 is manufactured in Columbus, OH, and designed with infinite customization options in mind. The unit is constructed in four standard lengths (10’, 14’, 20’, 24’) and can be continuously expanded by 4’ and 6’ sections. You can also incorporate an array of compatible Monster Series accessories, from Safety Spotter Arms to the Monster Matador, plate storage channels, the Monster Landmine, and many more.

A standard-size Monster Rig can instantly create between 2 and 6 squat/bench stations and 6-14 pull-up stations (see sizing breakdown below). The rig ships with all necessary 1” bolts and fasteners, Monster J-cups, crossmembers, and 9-foot uprights (12-foot uprights are also available).

US Patent D635,206, US Patent D636,038, US Patent D636,039, US Patent D636,040

Important: Unit must be bolted to the floor.

*The satin clear finish is a transparent finish. This will show any blemishes or marks from the manufacturing process that are present in the steel.

EchoInfinityMonster LiteMonster
2x2" Tube2x3" Tube3x3" Tube3x3" Tube
3x3" 11-Gauge Steel3x3" 11-Gauge Steel3x3" 11-Gauge Steel3x3" 11-Gauge Steel
0.5" Hardware0.625" Hardware0.625" Hardware1" Hardware


M-10M-14M-20M-24
4' + 6'4' + 6' + 4'4' + 6' + 4' + 6'4' + 6' + 4' + 6' +4'
2 Squat/Bench Stations4 Squat/Bench Stations4 Squat/Bench Stations6 Squat/Bench Stations
7 Pull-up Stations10 Pull-up Stations13 Pull-up Stations16 Pull-up Stations
2 Pair Monster J-Cups4 Pair Monster J-Cups4 Pair Monster J-Cups6 Pair Monster J-Cups
6 Monster 2.0 108" Uprights8 Monster 2.0 108" Uprights10 Monster 2.0 108" Uprights12 Monster 2.0 108" Uprights
2 XM-431 43" Single Pull-up Bars4 XM-431 43" Single Pull-up Bars4 XM-431 43" Single Pull-up Bars6 XM-431 43" Single Pull-up Bars
5 XM-70S 70" Single Pull-up Bars6 XM-70S 70" Single Pull-up Bars9 XM-70S 70" Single Pull-up Bars10 XM-70S 70" Single Pull-up Bars
2 Monster 43" Top Crossmember4 Monster 43" Top Crossmember4 Monster 43" Top Crossmember6 Monster 43" Top Crossmember
3 Monster 70" Top Crossmember4 Monster 70" Top Crossmember5 Monster 70" Top Crossmember6 Monster 70" Top Crossmember
2 Sets Laser-Cut Rogue Logo Plates2 Sets Laser-Cut Rogue Logo Plates2 Sets Laser-Cut Rogue Logo Plates2 Sets Laser-Cut Rogue Logo Plates



Racked Edition

Built in the 4’-6’-4’ pattern, the Racked Edition of the Rogue Monster Rig features power-rack style 4’ sections, with an adjustable drop-in bar for customizable depth options of 24”, 30”, and 43”. Version 2.0 retains the unmatched stability and durability of the original Monster Rig (3x3” 11-gauge steel uprights and oversized 1” hardware) while adding a broad range of new features. These include:


  • 11 Semi-Gloss Color options
  • Helpful laser-cut pin-position numbers on the uprights and bottom crossmembers
  • Laser-cut keyhole pattern on the sides of each upright, enabling greater compatibility with add-ons and attachments
  • 3x3” beams at the top of each section for added rigidity
  • Two sets of laser-cut Rogue branding panels with stainless backing plates
  • Redesigned 70” single pull-up bars with pass-through gusset for more height adjustment options and optimal stability
  • Updated top triangle plates with laser-cut Rogue logo


The Monster Rig 2.0 is manufactured in Columbus, OH, and designed with infinite customization options in mind. The unit is constructed in four standard lengths (10’, 14’, 20’, 24’) and can be continuously expanded by 4’ and 6’ sections. You can also incorporate an array of compatible Monster Series accessories, from Safety Spotter Arms to the Monster Matador, plate storage channels, the Monster Landmine, and many more.

Depending on its size, a Monster Rig can instantly create between 2 and 6 squat/bench stations and 6-14 pull-up stations (see sizing breakdown below). The rig ships with all necessary 1” bolts and fasteners, Monster J-cups, crossmembers, and 9-foot uprights (12-foot uprights are also available).

US Patent D635,206, US Patent D636,038, US Patent D636,039, US Patent D636,040

Important: Unit must be bolted to the floor.

*The satin clear finish is a transparent finish. This will show any blemishes or marks from the manufacturing process that are present in the steel.

EchoInfinityMonster LiteMonster
2x2" Tube2x3" Tube3x3" Tube3x3" Tube
3x3" 11-Gauge Steel3x3" 11-Gauge Steel3x3" 11-Gauge Steel3x3" 11-Gauge Steel
0.5" Hardware0.625" Hardware0.625" Hardware1" Hardware



M-10M-14M-20M-24
4' + 6'4' + 6' + 4'4' + 6' + 4' + 6'4' + 6' + 4' + 6' +4'
2 Squat/Bench Stations4 Squat/Bench Stations4 Squat/Bench Stations6 Squat/Bench Stations
5 Pull-up Stations6 Pull-up Stations9 Pull-up Stations10 Pull-up Stations
2 Pair Monster J-Cups4 Pair Monster J-Cups4 Pair Monster J-Cups6 Pair Monster J-Cups
6 Monster 2.0 108" Uprights8 Monster 2.0 108" Uprights10 Monster 2.0 108" Uprights12 Monster 2.0 108" Uprights
2 Drop-In Upright Assemblies4 Drop-In Upright Assemblies4 Drop-In Upright Assemblies6 Drop-In Upright Assemblies
2 XM-431 43" Single Pull-up Bars4 XM-431 43" Single Pull-up Bars4 XM-431 43" Single Pull-up Bars6 XM-431 43" Single Pull-up Bars
2 XML-43 Beams4 XML-43 Beams4 XML-43 Beams6 XML-43 Beams
3 XM-70S 70" Single Pull-up Bars2 XM-70S 70" Single Pull-up Bars5 XM-70S 70" Single Pull-up Bars4 XM-70S 70" Single Pull-up Bars
2 Monster 43" Top Crossmember4 Monster 43" Top Crossmember4 Monster 43" Top Crossmember6 Monster 43" Top Crossmember
3 Monster 70" Top Crossmember4 Monster 70" Top Crossmember5 Monster 70" Top Crossmember6 Monster 70" Top Crossmember
2 Sets Laser-Cut Rogue Logo Plates2 Sets Laser-Cut Rogue Logo Plates2 Sets Laser-Cut Rogue Logo Plates2 Sets Laser-Cut Rogue Logo Plates
2 Monster 70" Bottom Crossmember w/ Numbers4 Monster 70" Bottom Crossmember w/ Numbers4 Monster 70" Bottom Crossmember w/ Numbers6 Monster 70" Bottom Crossmember w/ Numbers


Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Base Edition

EchoInfinityMonster LiteMonster
2x2" Tube2x3" Tube3x3" Tube3x3" Tube
3x3" 11-Gauge Steel3x3" 11-Gauge Steel3x3" 11-Gauge Steel11 Gauge Steel
0.5" Hardware0.625" Hardware0.625" Hardware1" Hardware



M-10M-14M-20M-24
4' + 6'4' + 6' + 4'4' + 6' + 4' + 6'4' + 6' + 4' + 6' +4'
2 Squat/Bench Stations4 Squat/Bench Stations4 Squat/Bench Stations6 Squat/Bench Stations
6 Pull-up Stations8 Pull-up Stations12 Pull-up Stations14 Pull-up Stations
2 Pair Monster J-Cups4 Pair Monster J-Cups4 Pair Monster J-Cups6 Pair Monster J-Cups
6 108" Uprights8 108" Uprights10 108" Uprights12 108" Uprights
2 XM-43P Parallel Pull-up Bars4 XM-43P Parallel Pull-up Bars4 XM-43P Parallel Pull-up Bars6 XM-43P Parallel Pull-up Bars
5 XM-70P Parallel Pull-up Bars6 XM-70P Parallel Pull-up Bars9 XM-70P Parallel Pull-up Bars10 XM-70P Parallel Pull-up Bars

EXPLORE MONSTER ATTACHMENTS

Recommended Products

Reviews

1 - 6 of 6 Reviews
Gilos
Fort McMurray Alberta
★★★★★
★★★★★
1 month ago
Shrimp trawler adaptability
If you want to use this for rings as well as rope climbs be mindful that you just add the shrimp trawlers on without buying the special legs. I assumed that you could get extensions to fit in the holes but you can’t. I asked Rogue to get back to me on how I could get a couple of extra legs and still have yet to hear which is disappointing with what this investment was. As far a a rig goes or most Rogue products they are good. Response time to issues have a big opportunity for improvement however. I would recommend the product but you need to be careful ordering it as it is a long time to get it fixed if there is an issue.
Yes, I recommend this product
Originally posted on roguecanada.ca
Jossue2410
Miami
★★★★★
★★★★★
2 years ago
The soul of my gym
Amazing Rack waiting for get a bigger place and buy another one
Yes, I recommend this product
Helpful?
Yes · 7
No · 1
BostonTraining
Boston, MA
★★★★★
★★★★★
2 years ago
Great prodct Great Value
I have had this thing for almost a year now. Might be the best purchase I ever made for the gym. Definitely top 5. Best value for sure.
Helpful?
Yes · 2
No · 1
bigb80
New Mexico
★★★★★
★★★★★
3 years ago
Great Rig
I bought this rig about a month ago and we love it. It is overbuilt, I believe it could and would stand up to just about anything!!!
Yes, I recommend this product
Before the flooring
Helpful?
Yes · 13
No · 7
Whiteside
Florida, United States
★★★★★
★★★★★
4 years ago
rogue rigs are just awesome!
This is my second rig I've purchased from rogue and still never let's me down!!!
Yes, I recommend this product
Helpful?
Yes · 18
No · 14
doug t
Bremen, IN, United States
★★★★★
★★★★★
5 years ago
totally BOSS
Just arrived bright green 14 foot Monster RIG. SO COOL Thanks for great rig. Everything came in great shape. Beutifully made
Yes, I recommend this product
Helpful?
Yes · 31
No · 39
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery