Gift CardsContact UsOrder Status
Live Chat

AML-2 Adjustable Monolift 2.0 - Monster Lite

★★★★★
★★★★★
4.2
24 Reviews
Made in U.S.A.

AML-2 Adjustable Monolift 2.0 - Monster Lite

★★★★★
★★★★★
4.2
24 Reviews
Made in U.S.A.
$390.00
Ships in 7-10 Days

Gear Specs

BrandRogue Fitness
ColorBlack / Red
Made In USAYes
Product Weight51LB (Pair)
Length16.75" (total depth from mounting face) / 3.25" (jaw depth)
Width4" (overall) / 1.25" (jaw)
Height17" (overall) / 18" (when loaded)
Material TypeUHMW Protective Plastic
Steel Notes0.25” and 0.375” Steel
Other Product SpecsTested at 1000+LB
Product Description

Compatible with any Monster Lite Series power rack or rig,* the AML-2 Rogue Adjustable Monolift gives athletes a way to comfortably unrack and rerack heavy weight without having to worry about walking the bar out during squats or avoiding J-cups while benching. With Version 2.0, we’ve upgraded the strength of the attachment and re-engineered the center of mass around the handle, removing unnecessary weight and enabling easier, one-hand adjustments. A new stainless steel key can also lock the Monolift’s jaws in place, further simplifying adjustments and allowing the hooks to be utilized as traditional J-cups.

Read More

AML-2 Adjustable Monolift 2.0 - Monster Lite

Compatible with any Monster Lite Series power rack or rig,* the AML-2 Rogue Adjustable Monolift gives athletes a way to comfortably unrack and rerack heavy weight without having to worry about walking the bar out during squats or avoiding J-cups while benching. With Version 2.0, we’ve upgraded the strength of the attachment and re-engineered the center of mass around the handle, removing unnecessary weight and enabling easier, one-hand adjustments. A new stainless steel key can also lock the Monolift’s jaws in place, further simplifying adjustments and allowing the hooks to be utilized as traditional J-cups.

Important: The Monolift ships unassembled. A list of required tools for set-up is included below. [For owners of a Monster rig/rack, Rogue also offers a Monster version of the Monolift 2.0., sold separately.]

A cost-effective alternative to expensive, full-scale monolift units, the AML-2 Adjustable Monolift mounts to your rack’s uprights via a pair of 1/4” steel brackets (MG Black finish) and 5/8” detent pins. The 1.25" wide jaw sections feature a Texture Red finish and are placed in recessed hook plastic, with an extended 8” of vertical space for re-racking (2” more than the previous model). A set of 3/8” thick steel counterweights (Texture Black finish) provide the necessary torque so that—when you lift the bar off the Monolift—the hooks will swing back approximately 5.5” toward the rack and stay there. This clears up enough extra space to go straight into your workout, and also enables safe re-racking, as the slanted angle of the unloaded hooks makes it easy to guide the bar in, overriding the counterweights and moving the Monolift back into its original position.

Height adjustments can be made in increments as small as 2”, and with Rogue’s unique design—featuring a “backstop” bolt above each primary hook bolt—the Monolift cannot move further away from the rack while the user is setting up. This feature is not found on most comparable attachments on the market.

Tools Needed For Assembly:

  • 7/32" Hex Key (Included)
  • 5/16" Hex Key (Included) 
  • 9/16" Socket/Wrench
  • 3/4" Socket/Wrench


*Please Note: While the AML-2 can be safe for solo use, it’s always recommended to have spotters available for heavier lifts. Rogue also highly recommends mounting the Monolift to a rack or rig that’s securely fastened to the floor and/or wall.

Gear Specs

Specifications:

  • Made in the USA
  • Compatible with Rogue Monster Lite Series racks and rigs
  • 0.25” and 0.375” Steel construction
  • Protective UHMW Plastic
  • Weight: 51LB (Pair)
  • Width: 4" (overall) / 1.25" (jaw)
  • Height: 17" (overall) / 18" (when loaded)
  • Length: 16.75" (total depth from mounting face) / 3.25" (jaw depth)
  • Finishes: MG Black brackets, Texture Red outer jaws, Texture Black counterweights
  • Tested at 1,000+ LBS
  • Compatible with nearly all standard barbells, as well as some specialty bars like the Camber Bar and Safety Squat Bar.
  • Tools Needed for Assembly: 7/32" Hex Key (Included), 5/16" Hex Key(Included), 9/16" Socket/Wrench, 3/4" Socket/Wrench
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

KEY FEATURES OF THE ROGUE ADJUSTABLE MONOLIFT 2.0

A Better Way to Unrack and Re-Rack Heavyweight
1

A Better Way to Unrack and Re-Rack Heavyweight

The rack-mounted Adjustable Monolift 2.0 is compatible with any Rogue Monster Lite Series rack or rig, giving athletes a new means of performing heavy-weight squats and other lifts without having to walk the bar out or worry about dodging J-cups. The system, which has been tested at a capacity of 1,000+ LBS, includes (2) steel mounting brackets in MG Black (with laser-cut Rogue branding), (2) 1.25" wide plastic-lined J-Hooks in Texture Red, (2) steel counterweights in Texture Black, (2) 5/8” detent pins, and a set of 3/8” stopper bolts. The hooks are designed to swing back 5.5” when the weight is removed, clearing up space to lift. The athlete can then guide the bar back into the jaws, overriding the counterweights and returning the Monolift to its beginning position.

Easier Adjustments
2

Easier Adjustments

Height changes can be made in as little as 2” increments (using the included detent pins), and Version 2.0 of the Rogue Monolift has made it much easier to make these adjustments. Each side of the Monolift now weighs just 25.5 LBS (down from 28.5 LBS), and a grip-friendly design on the bracket allows for more comfortable maneuverability. The jaws also now sit about 10” below the rack attachment point (several inches closer than Version 1.0), creating more options for positioning the Monolift.

Quality Rogue Construction - Made in the USA
3

Quality Rogue Construction - Made in the USA

Each AML-2 unit is manufactured in the USA using quality 0.25” and 0.375” steel (with laser-cut Rogue branding in the brackets) and UHMW plastic. The resting J-Hook is protected by 8 vertical inches of plastic, providing the user ample space for reracking compared to the original model, which offers about 6” of vertical plastic. Plastic linings in the bracket and along the entire inside channel—combined with button heads along the inside face of both Monolift segments—help protect the user from sharp edges and bolt threads while also preventing any damage to your rack’s uprights during adjustments.

Please Note: The Monolift ships unassembled, and the following tools will be required for set-up: 

  • 7/32" Hex Key (Included)
  • 5/16" Hex Key (Included) 
  • 9/16" Socket/Wrench
  • 3/4" Socket/Wrench
Space Efficiency
4

Space Efficiency

In resting position, the Monolift 2.0 extends just 16.75” from the mounting face of the rack to the end of the counterweight. This is a reduction of about 6” compared to the previous model, creating substantial, additional clearance for small training spaces. The swing distance--meaning the distance the hook moves out of the way once the bar has been unracked--has also been improved from about 5” to 5.5”. This extra half inch can be significant in helping to prevent any interference between the Monolift and the user during their lifts.

Stainless Steel Locking Key
5

Stainless Steel Locking Key

A stainless steel locking key with a snake knotted tether is also included with the AML-2. This allows the user to lock the J-Hook in place for a more convenient adjustment or for the purposes of using the Monolift as a traditional J-Cup. The locking key is simply inserted through the rectangular opening in the bracket and J-Hook while the J-Hook is in the resting position. There is a rectangular opening towards the back of the bracket designed to hold the key when it is not in use. The key’s connected tether should also ensure it won’t be misplaced.

Recommended Products

Reviews

1 - 8 of 24 Reviews
Beat Equipment
Maryland
★★★★★
★★★★★
Jun 2023
AML-2 Adjustable MoNolift
I purchased this in May of 2023 and I have been using this piece of equipment every time the opportunity presents itself. Very happy with my purchase. It works exceptionally well for squats, bench, incline bench and military press / Bradford press. Definitely recommend this for your workouts.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
TravisBK
Riverton, WY
★★★★★
★★★★★
May 2023
Great purchase
I bench Equipped by myselft quite a bit. I purchased the Monolift hoping to solve my heavy bench re-rack issues. By having the rack more over my chest it is easier to un-rack (obviously) but the biggest issue/help was re-racking when complete. While it is still not easy I can get it done alone and safely now. I wish there were more height adjustments available, & it would be nice if the J Hooks could also move down (or even) & back rather than up & back - that would really help with the Heavy Single re-racks. Great purchase, the next best thing to having a spotter.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
BADA Boom
San Diego, CA
★★★★★
★★★★★
Apr 2023
Just as functional as the 1.0 version but compact
Love it. Easier to adjust between heights than the previous version. People mentioned that the cups don’t move back far enough for squats, but it’s a non-issue for me. My wife and I use it for squats, incline, flat, decline bench and sometimes for deadlifts. Great product. Would definitely recommend to anyone in the market.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
rbarnes
Louisville KY
★★★★★
★★★★★
Mar 2023
Perfect addition to my rack
These provide improved bench press motion versus J-cups. The ability to lift straight up/down has eliminated shoulder pain and improved confidence when lifting alone. I suggest magnetizing the key lock to reduce the chances of coming loose. Superior Rogue quality and functionality justify my purchase. Installed on The Monster Lite Cave.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
AlexG
Clermont, FL
★★★★★
★★★★★
Feb 2023
Not Great for Bench Press
I agree with a lot of the negative reviews posted so far. I bought these for bench press to help with heavy unracks but the spacing on the holes is so far apart that I can't find a good position where these would actually work better than J-Cups. I also had the same issue where screwing in the bolts tightly ends up making it so the design doesn't swing properly. Product is already assembled (only used once), so not sure if Rogue would accept a return. I love Rogue products overall but this was a miss for me.
Helpful?
Yes · 4
No · 8
Port Saint Lucie, Florida
★★★★★
★★★★★
Dec 2022
Not just for squats
I bought these for my wife’s squats, but, we use them for bench press (saves her shoulder) and hip thrusts. What a great attachment, Rogue, keep up the great work.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
MayraG
Chicago
★★★★★
★★★★★
Oct 2022
No spotter needed
I was skeptical of these at first but after using them I won’t lift without having them setup. Them help more with benching as you can lift the bar straight up and start your set.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Mike1989
★★★★★
★★★★★
Oct 2022
Need some major improvements
Just got mine, Iiked the design but there are some major improvements that need to be made in my opinion. 1. Probably the biggest problem, the build quality of the bolt is not great, if you tighten it too much it won't return but it feels unsafe if you don't tighten it enough. the screw and bolt move around. 2. Hard to find a perfect height on the Monster Lite rack, not enough holes on the side, for me very hard to find a perfect position. 3. A lot of small scratches on my, maybe it's from shipping or packaging Anyway, I'm a fan of Rouge but this is not a great product in my opinion, I prefer the old design.
Helpful?
Yes · 7
No · 2
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery