Gift CardsContact UsOrder Status
Live Chat

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
689 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
689 Reviews
Made in U.S.A.
KB-9LB Rogue Kettlebell - E Coat
$30.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$55.00
KB-35LB Rogue Kettlebell - E Coat
$65.00
KB-40LB Rogue Kettlebell - E Coat
$70.00
KB-44LB Rogue Kettlebell - E Coat
$75.00
KB-53LB Rogue Kettlebell - E Coat
$85.00
KB-62LB Rogue Kettlebell - E Coat
$105.00
KB-70LB Rogue Kettlebell - E Coat
$115.00
KB-80LB Rogue Kettlebell - E Coat
$125.00
KB-88LB Rogue Kettlebell - E Coat
$145.00
Rogue Kettlebell - E-Coat 26-35-70LB Set
$215.00
Includes 1 of each weight: 26, 35, 70lbs
Rogue Kettlebell - E-Coat 35-53lb Set
$295.00
Includes 2 of each weight: 35lb & 53lb
Rogue Kettlebell - E-Coat 9-70LB Set
$595.00
Includes 1 of each weight: 9, 13, 18, 26, 35, 40, 44, 53, 62, 70lbs

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).
Loading

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Note: *Due to the casting process, cast products may have minor variances in the finish.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

MADE IN THE USA - CAST IN CADILLAC
1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

DUCTILE IRON
2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

E-COAT FINISH
3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

GLOSS & BRANDING
4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

WIDE SELECTION
5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

Approved for ACFT
6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 689 Reviews
Mr BedStuy
Brooklyn NY
★★★★★
★★★★★
August 8
Definitely Invest/ Strong Buy
One of the best investments I made this year! If you plan on getting one or a few, you won’t regret it.
Helpful?
Yes · 0
No · 0
Terry V
Coeur d' Alene, ID
★★★★★
★★★★★
August 1
Nice and Heavy!
What can I say? It's a big hunk of steel designed to be violently lifted from the floor to wherever. Product is as advertised. I love Rogue stuff because it is made in the USA. The E-coat is grippy and not slippery at all.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
grant_pdx
★★★★★
★★★★★
July 24
Solid, easy to grip, epic kettlebells!
We purchased 4 different weights as an upgrade from our adjustable kettlebell and the difference is night and day! We're going to buy a complete set. These things are rock solid, super easy to grip, and we chose these over the other options to buy something made in the US. Having the colors would be nice, but that is a super minor nit that falls way below the fold on why these things are great!
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
RedMonRasta
★★★★★
★★★★★
July 18
Strength is a Skill
BAMF. Final piece to the personal set I’ve been building the last decade. I have a variety of brands and Rogue E-Coat are the best.
Helpful?
Yes · 0
No · 0
Josh Lucky
Louisiana
★★★★★
★★★★★
July 16
Outstanding brand !
10 out of 10 on the kettlebells, I chose the E coat because I like the rugged look and feel, I’m super happy with my decision and my bell collection just keeps getting heavier!!
Yes, I recommend this product
Great for outdoor lifts
Helpful?
Yes · 0
No · 0
TC MI
★★★★★
★★★★★
July 10
Best Bells
These bells are awesome! Will not rust, ship fast and feel great when lifting. Best bells for the Money I have found so far.
Yes, I recommend this product
Helpful?
Yes · 0
No · 1
Eric Ch
Michigan
★★★★★
★★★★★
July 9
Michigan Proud
Arrived in great condition. Packaging was on point. Honestly the best kettlebells around. Made in Michigan is a plus for me.
Yes, I recommend this product
Helpful?
Yes · 5
No · 0
T Mak
Stoneham, Ma
★★★★★
★★★★★
June 17
Newest Addition to the fleet - 62Lbs! Made in USA
I just added the 62lb beast to the original three kettlebells I bought during COVID. It does have a slightly different appearance compared to the other three E-coats, with a few cosmetic defects. I also purchased the 360 brush to give my KBs a good scrub, which should help improve the 62lbs rough look. Initially, I was a bit disappointed considering the price, but minor imperfections are expected, and I'll be using it regardless! The 3-day delivery is unbeatable! I love Rogue's products and again I understand that minor defects are expected. I can't wait to add the 70lb kettlebell and eventually collect all the E-coats. These are my favorite kettlebells to use, and if I need more grip, that's where the chalk comes in! Keep crushing it, Rogue!
Yes, I recommend this product
Helpful?
Yes · 6
No · 0

Response from Rogue Fitness:

June 24
Thank you for taking the time to leave your feedback and send in these pictures! We have reached out via email to take a closer look at those imperfections.
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery