Rogue Monster Safety Strap System 2.0

★★★★★
★★★★★
4.3
20 Reviews
Made in U.S.A.

Rogue Monster Safety Strap System 2.0

★★★★★
★★★★★
4.3
20 Reviews
Made in U.S.A.
RM-3 Monster Strap Safety System 2.0 (30" depth)
$245.00
RM-4 Monster Strap Safety System 2.0 (43" depth)
$250.00
RM-3 Monster Strap Safety System 2.0 (24" depth)
$240.00

Gear Specs

BrandRogue Fitness
Made In USAYes
Width43", 30", 24"
Diameter1" diameter pin
Material Type3" Wide Reinforced Nylon, safety-rated for 10,000LB
Steel Notes0.3125" thick steel
Monster CompatibleYes
Product Description

The updated design of Rogue’s Monster Safety Strap Hangers makes them even easier to adjust, with full compatibility across all Monster Series racks and rigs.

The Monster Strap Safety System 2.0 features a 3" Wide Reinforced Nylon, safety-rated for 10,000LB. Each adjustable strap is secured to a set of brackets, which are manufactured from 0.3125" thick steel and equipped with a 1" diameter pin. As an advantage over standard pin/pipe and flip-down safety systems, the front and back ends of the strap hangers can be mounted at different heights. This provides the option of positioning the strap at an uneven angle-- forcing a dropped bar to roll safely away from an athlete on a missed lift. The nylon material of the strap is also more forgiving on a bar than a steel alternative.

Read More

Monster Safety Strap System 2.0

The updated design of Rogue’s Monster Safety Strap Hangers makes them even easier to adjust, with full compatibility across all Monster Series racks and rigs.

The Monster Strap Safety System 2.0 features a 3" Wide Reinforced Nylon, safety-rated for 10,000LB. Each adjustable strap is secured to a set of brackets, which are manufactured from 0.3125" thick steel and equipped with a 1" diameter pin. As an advantage over standard pin/pipe and flip-down safety systems, the front and back ends of the strap hangers can be mounted at different heights. This provides the option of positioning the strap at an uneven angle-- forcing a dropped bar to roll safely away from an athlete on a missed lift. The nylon material of the strap is also more forgiving on a bar than a steel alternative.

Note: The bolts do not need to be removed in order to adjust the height of the strap hangers.

Monster Safety Strap Hanger Sets are available in three depths (43", 30", 24"), so there’s a system that matches the dimensions of any Monster Series unit.

Gear Specs

Specifications

  • Compatible ONLY with Rogue Monster Series rigs/racks
  • Strap: 3" Wide Reinforced Nylon, safety-rated for 10,000LB
  • Steel Brackets: 0.3125" thick steel, 1" diameter pin
  • Optimized for quick, easy adjustments
  • Ends can be mounted at different heights
  • Won’t scuff/damage bars
  • Includes 3 pieces of UHMW plastic to help protect your uprights
  • Depth Options: 43", 30", 24"


See Also: Safety Strap System for Rogue Monster Lite Racks/Rigs

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Recommended Products

Reviews

1 - 8 of 20 Reviews
Jon5
★★★★★
★★★★★
March 9
Scratches things up
Works well but scratches things up. My screws holding the liner weren’t fully set and scratched my rack up pretty good. If you get a quality set this is an excellent product
Yes, I recommend this product
Helpful?
Yes · 1
No · 0

Response from Rogue Fitness:

March 13
We're sorry for the issues with your Monster Strap Safeties. Upon investigation, our team has a new pair ready for you now.
Miguel1007
California
★★★★★
★★★★★
Jun 2022
Inner plastic lining was not screwed correctly
So I bought these for the PR5000v2 rack and they are a bit lose, but not enough to be an issue. The 2 stars is for a screw not being screwed all the way in on the inner liner of the brackets. I didn’t noticed and it scratched my rack pretty bad. So I paid over $250 to just damage my beautiful rack. I primarily got these because the REP have too much slack.
Helpful?
Yes · 1
No · 4

Response from Rogue Fitness:

Jun 2022
We're very sorry for any issues with your Strap Safeties and are having our team reach out to you ASAP.
Jacob01
★★★★★
★★★★★
May 2022
Not Great
The design of these straps make it so that it can't come off the rack without removing a bolt, which gets in the way of other attachments such as lever arms. Additionally there is very little slack in the strap itself, which makes it impossible to make large adjustments without pausing to adjust the other side.
Helpful?
Yes · 3
No · 4
Ezra
Dallas, Texas
★★★★★
★★★★★
Apr 2022
Great product
My only regret is that I did not purchase this earlier. Trying to save money by using the safety bars, that was a mistake
Yes, I recommend this product
Helpful?
Yes · 1
No · 2
Peds
Salem, OR
★★★★★
★★★★★
Nov 2021
Awesome safety straps
These straps are the way to go! Much easier to adjust than the pipe and pin system which were both heavy and more challenging to align. Wish I had made the upgrade with the initial order.
Yes, I recommend this product
Helpful?
Yes · 4
No · 1
MrEu
NY
★★★★★
★★★★★
Jun 2021
Works on a PR5KV2 Rack!
Bought it due to my rack not having any straps in stock at the time. These fit perfectly. Loaded and dropped about 600LB without problems.
Yes, I recommend this product
Helpful?
Yes · 6
No · 2
Frank J
Rockford Michigan
★★★★★
★★★★★
Mar 2021
Love the function
I have friends who have this system and I love using it in coaching as well as my own training. Unfortunately my Rogue Rack is 2x3 and was unable to use with my rack!!! I wish you mad one compatible with my rack!!!
Yes, I recommend this product
Helpful?
Yes · 0
No · 12
Rodddd
Los Angeles
★★★★★
★★★★★
Mar 2021
Great straps, crappy bolt system
Watch the YouTube video about how these straps are limited by the bolts and nuts it came with. The Clovis pins from Home Depot make this a much better accessory.
Yes, I recommend this product
Helpful?
Yes · 16
No · 2
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery