SAML-24 Monster Lite Safety Spotter Arms (Pair)

★★★★★
★★★★★
4.8
313 Reviews
Made in U.S.A.

SAML-24 Monster Lite Safety Spotter Arms (Pair)

★★★★★
★★★★★
4.8
313 Reviews
Made in U.S.A.
$195.00

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight44LB
Length24"
Width3"
Steel Notes3x3" 11-Gauge Steel
Other Product SpecsLined with UHMW plastic
Monster Lite CompatibleYes
Product Description

Compatible with all Monster Lite racks, Rogue’s heavy-duty 24” Safety Spotter Arms are designed to protect both the weightlifter and the bar itself.

When adding spotter arms to an existing rack, dependability is always the optimum word-- particularly for athletes training alone in a home gym or garage gym.


Read More

Monster Lite Spotter Arms

Compatible with all Monster Lite racks, Rogue’s heavy-duty 24” Safety Spotter Arms are designed to protect both the weightlifter and the bar itself.

When adding spotter arms to an existing rack, dependability is always the optimum word-- particularly for athletes training alone in a home gym or garage gym. This is why Rogue manufactures its Monster Lite Spotter Arms from 3x3” 11-gauge steel tubing, with welded-on end-plates for additional safety and specially designed hitch-pins to lock the spotters in place. The arms feature a UHMW plastic insert on top to protect  the knurling of your bars.

Like all products in the Monster Lite line, these spotters feature 5/8” holes and a 5/8” pin, rather than the 1” varieties of the standard Monster Spotter Arms.

Gear Specs

SPECIFICATIONS

  • Made in USA
  • Sold in Pairs
  • Steel: 3x3” 11-gauge tubing
  • Length: 24”
  • Weight: 44LB
  • 5/8” bolts and fasteners
  • UHMW plastic inserts
Shipping

ROGUE FAST SHIPPING

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your day.  Order today, track today.

Recommended Products

Reviews

1 - 8 of 313 Reviews
SlowLearner81
Colville, WA
★★★★★
★★★★★
Dec 2022
Multi-Purpose!
Well built and solid. I use them at the bottom, middle, and top of the rack for cable use as well. Still tweaking the 550 cord but it gets the job done.
Yes, I recommend this product
Helpful?
Yes · 8
No · 0
Stealthyyone
San Diego
★★★★★
★★★★★
Dec 2022
Nice arms
Heavy duty quality spotters. Fit my rack as expected. Price could be better for consumer
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Alfredoreo
Davie
★★★★★
★★★★★
Dec 2022
Quality Control didn't go through these
One side was so tight to go in that it scratched up my rack. I had to put it on a vise and open it up about 1/4" for it to slide in.
Helpful?
Yes · 1
No · 1

Response from Rogue Fitness:

Dec 2022
We're very sorry for any issues with your spotter arms. Our team has reached out to get this resolved!
JuniorOK
Norman Oklahoma
★★★★★
★★★★★
Nov 2022
Poor Quality
I’ve bought these same arm several years ago. I was expecting the same built quality. I was disappointed when I took them out of the box. The plastic used on these newer versions looked much cheaper and didn’t cover as much of the arms as my past ones did. Very disappointed in Rogue for what seems like cutting corners to save money. Btw the price is still the same even though the quality is not
Helpful?
Yes · 3
No · 0
turbalf
France
★★★★★
★★★★★
Nov 2022
room for little improvements !
I train alone in my very tiny home gym. I have a 24'' monster lite rack, I use straps inside the rack and I needed security outside. I have to confess that the first time I used the spotter arms i I was very disapointed : I couldn't set them at the right height, I choosed monster lite over monster specifictly to get westside hole spacing to get the best possible height, but useless with spotter arms as one hole out of two dosen't allow to insert the detent pin as the pin find itself under the westside zone, in the middle of 2 regular holes.. So I drilled another hole in the spotter arm exactly one inch lower, and now I can use every single hole of the westside part. I am very surprised that Rogue didn't think about this obvious and cheap hack.(thanks Rogue for the royalties :) ). Another hack, may not for everyone : I don't need the full lenght of the spotter arms, so I cut them for 2 reasons : now I can use or store them inside my 24'' rack (again, an option for shorter arms from Rogue would have been nice), and I can store them face to face in the bottom of the rack, very space saving ! Besides thoses little improvements, very nice quality, as always with Rogue !
Yes, I recommend this product
Originally posted on rogueeurope.eu
Jaeybyrd85
North Carolina
★★★★★
★★★★★
Oct 2022
Heavy duty a tough
They do the job well, stable and very heavy which is good to me. Only improvement I would make is for the edges with raised metal tab had some plastic to protect bar bells
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
crmmoore
OH
★★★★★
★★★★★
Oct 2022
Spotter Arms that Doubles as a Leg Slicer
There is no question that these are built well. My issue is that the edges are sharp and unsafe if you place them outside of the rack as they show and recommend. Two people in my house have had clothes ripped and flesh cut into just grazing these as we walked around them. We had no choice but to move them to inside the rack. Had I know that I would be forced to do that, then I would have just opted for the safety straps. Will reach out to Rogue, hopefully there is a fix/resolution to this.
Helpful?
Yes · 0
No · 0
Ben12
Riverside, CA
★★★★★
★★★★★
Sep 2022
Work great… but not for trolley lever arms
I bought these in hopes to use with the trolley lever arms, but the spotter arms are too short. I have a lite rig and therefore can’t use the spotter arms the monster rigs offer. Wish they made spotter arms long enough to use with the trolley arms.
Yes, I recommend this product
Too short
Helpful?
Yes · 1
No · 5
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery