The 2x3 Strip® 2.0
The 2x3 Strip® 2.0
Productspecificaties | |
| Merk | Rogue Fitness |
| Kleur | Zwart |
| Gemaakt in de VS | Ja |
| Gewicht | 10.15LB |
| Lengte | 36" |
| Breedte | 3" |
| Staalgegevens | 2 "x 3" 11-gauge Stalen buis |
| Andere kenmerken | Materiaal voor montage aan houten staanders inbegrepen |
Productbeschrijving
The 2x3 Strip® 2.0 is our newly redesigned wall-mount accessory tool—optimized for efficiently holding a wide range of attachments primarily from the Rogue Infinity line.
Meer lezen
The 2x3 Strip® 2.0
The 2x3 Strip® 2.0 is our newly redesigned wall-mount accessory tool—optimized for efficiently holding a wide range of attachments primarily from the Rogue Infinity line.
The Strip 2.0 measures 36” in length and can be positioned horizontally or vertically depending on the function required. Multiple Strips can also be installed in a series so the user can create his or her ideal custom set-up (mounting more than one in sequence, for example, can allow for convenient height adjustments on the Kids Pull-Up Bar).
With this version, The Strip is a square, 2x3” 11-gauge steel tube (rather than a channel), improving its overall strength and secure fit/compatibility with any of the following products:
Each order comes with (1) 5/8" x 4" detent pin and a set of (4) 3/8" x 2-1/2" wood lags for mounting to a stud.* The front of the Strip includes (4) oversized holes to allow for easy tightening of the lags. Holes are spaced 2"-on-center along each side of the Strip.
*Important: If attempting to secure the Strip to a wall construction other than wood stud, the buyer is responsible for using the correct hardware. The Strip is NOT recommended for mounting to drywall or metal studs.
Accessories not included.
See Also: 3x3 Strip 2.0 for Monster Lite Mounts
Productspecificaties
Specificaties
- Amerikaans kwaliteitsproduct
- Wall-Mount Storage Tube - 2x3” 11-gauge steel - Laser-cut Rogue branding
- Per stuk verkrijgbaar
- Finish: Texture Black Powdercoat
- Length: 36"
- Width: 3"
- Weight: 10.15LB
- For use on wood studs and concrete walls (May require the use of a stringer or additional support)
- For use ONLY with compatible 2x3 accessories
- (1) ⅝” x 4” Detent Pin
- (4) 3/8" x 2-1/2" Wood Lags
- 4 front holes on Strip for tightening lags
- Holes spaced 2” on center on both sides of Strip
Verzenden
Rogue Snelle Verzending
Via het Rogue-verzendsysteem kun je je bestelling volgen vanaf het moment dat je de bestelling plaatst tot aan het moment dat deze wordt bezorgd. Bestel nu en volg je bestelling direct.
