Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
593 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
593 Reviews
Made in U.S.A.
Hundo Pricing
KB-9LB Rogue Kettlebell - E Coat
$30.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$50.00
KB-35LB Rogue Kettlebell - E Coat
$60.00
KB-40LB Rogue Kettlebell - E Coat
$65.00
KB-44LB Rogue Kettlebell - E Coat
$70.00
KB-53LB Rogue Kettlebell - E Coat
$75.00
KB-62LB Rogue Kettlebell - E Coat
$85.00
KB-70LB Rogue Kettlebell - E Coat
$100.00
KB-80LB Rogue Kettlebell - E Coat
$110.00
KB-88LB Rogue Kettlebell - E Coat
$140.00
Pounds Away From HundoPricing
500LB
Total Price:
$0.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).
Loading

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Fast Rogue Shipping

Rogue prides itself on fast, professional shipping, often with same-day turnaround times. Your kettlebells will be packaged safely and efficiently, and you’ll be able to follow the progress of your order from our factory floor to your door using the online Rogue Shipping Tracker. Please note, all KBs over 70LB in weight will ship freight.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

Loading
1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

Loading
2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

Loading
3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

Loading
4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

Loading
5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 593 Reviews
TPG8
Byron, GA
★★★★★
★★★★★
3 weeks ago
Decent
If I had to do it over again I would just spend a little extra for the color coded kettlebells. In a group setting the weight is harder to identify and therefore get disorganized much easier.
Helpful?
Yes · 2
No · 0
Leeizzy
New Jersey
★★★★★
★★★★★
July 11
Unexpected but still best quality
I have a few random sets of kb's. Ones that aren't as expensive as rogue, so I didn't have high expectations on the quality- they were my starter/ knock around bells. I ordered my first kb w/ rogue last year and immediately noticed the difference. I appreciated that it arrived in pristine condition and packaged with care. I recently ordered a 44 pound ecoat, and noticed a few dings on arrival. It's nothing to lose sleep over, but I was a little surprised by it. I know it'll eventually earn a few bruises along the way, but I would have preferred to be the one to put them there. I'll chalk this one up to a decent bell from rogue in hopes that my next order will arrive in better condition.
Helpful?
Yes · 2
No · 2
Ventura Ca
★★★★★
★★★★★
July 3
Solid.
It’s a kettlebell lol it’s solid the coating is great for indoor and outdoor. Rogue has the best prices when you factor in shipping. If recommend it for sure.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
The Meetlocker
Kalamazoo, Michigan
★★★★★
★★★★★
July 2
Supporting west michigan made!
We have the E Coat in all sizes and love them, plus the powder coat in 97lbs.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Scaffy
Mitcham Australia
★★★★★
★★★★★
June 25
Perfect for what I needed
I have a whole set & looked for a while for an all black option to match my gyms ascetic & these are great
Yes, I recommend this product
Originally posted on rogueaustralia.com.au
BLC f3
Matthews, NC
★★★★★
★★★★★
June 23
Double Clean & Press ….Kettle Bell 2, 40lb.
A couple of 40’s with the e-coat finish! Bought ‘em to do dbl cleans & presses and they do deliver! Beautiful branding, chip resistant, and they just look gorgeous! A slightly thicker handle than the traditional but I’ve adjusted. The e-coat makes it a little grainier than the black matte finish but that is no problem. Love them and use them several times a week!
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Coimbra, Portugal
★★★★★
★★★★★
June 2
Perfection at 36kg
I bought this a few months ago to add some weight and train unilaterally. It’s a solid, well made piece of equipment. The price is incredible compared to other sites online like, kettlebell kings. Buy a quality on: swing it, clean it, squat it and press it and you’ll be well on your way.
Originally posted on rogueeurope.eu
Jeff 01234
Mi
★★★★★
★★★★★
May 31
Great Kettlebell
Really happy with the purchase. Rogue is top notch. I like the E coat paint, made in Michigan, solid nice piece of workout equipment. Highly recommend.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery