Gift CardsContact UsOrder Status
Live Chat

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
672 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
672 Reviews
Made in U.S.A.
KB-9LB Rogue Kettlebell - E Coat
$30.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$55.00
KB-35LB Rogue Kettlebell - E Coat
$65.00
KB-40LB Rogue Kettlebell - E Coat
$70.00
KB-44LB Rogue Kettlebell - E Coat
$75.00
KB-53LB Rogue Kettlebell - E Coat
$85.00
KB-62LB Rogue Kettlebell - E Coat
$105.00
KB-70LB Rogue Kettlebell - E Coat
$115.00
KB-80LB Rogue Kettlebell - E Coat
$125.00
KB-88LB Rogue Kettlebell - E Coat
$145.00
Rogue Kettlebell - E-Coat 26-35-70LB Set
$215.00
Includes 1 of each weight: 26, 35, 70lbs
Rogue Kettlebell - E-Coat 35-53lb Set
$295.00
Includes 2 of each weight: 35lb & 53lb
Rogue Kettlebell - E-Coat 9-70LB Set
$595.00
Includes 1 of each weight: 9, 13, 18, 26, 35, 40, 44, 53, 62, 70lbs

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).
Loading

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Note: *Due to the casting process, cast products may have minor variances in the finish.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

MADE IN THE USA - CAST IN CADILLAC
1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

DUCTILE IRON
2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

E-COAT FINISH
3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

GLOSS & BRANDING
4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

WIDE SELECTION
5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

Approved for ACFT
6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 672 Reviews
OleK
★★★★★
★★★★★
1 week ago
quality issues
I received two kettlebells, a 35lb and a 53lb. I’m disappointed with the quality of the 53lb one. The text is poorly legible, and the casting isn’t as refined.
Helpful?
Yes · 0
No · 0
Jabel
Chattanooga TN
★★★★★
★★★★★
1 week ago
Comfy, made in USA
Purchased a 16kg, 24kg and 32kg to use with the simple and sinister program. They are very comfortable and I like that they are manufactured in the USA. So far they are only used for swings and turkish get ups, but i’m looking forward to getting to know these bells better. Haven’t dropped one yet but they feel bulletproof. Quality product. Will purchase more in the future.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
SA Mark
San Antonio, TX
★★★★★
★★★★★
3 weeks ago
Your Basic Classic Kettlebell
When you think "classic kettlebell" styling, you should have this image in mind. The handle is thick and smooth, the way it should be. The look and finish are top notch. I've been using this in my KB Simple workout (ala Pavel) and absolutely love it. Best of all, it's made in America! When it comes time to make the jump to my next weight, I'll be shopping at Rogue again.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Daniel La
Wilmington, DE
★★★★★
★★★★★
4 weeks ago
overall good but some quality issues
Overall well made, however some quality issues. One of bells didn't have coating on part of the handle, which is already prone to rust. Another doesn't have the smoothest alignment on the handle.
Yes, I recommend this product
Helpful?
Yes · 3
No · 0

Response from Rogue Fitness:

4 weeks ago
We're sorry to hear how your kettlebells arrived to you and have made this right.
alcyon
Orange County, CA
★★★★★
★★★★★
May 13
Questionable Quality Control
I have a growing set of these kettlebells and have been gradually adding more sizes over time. Recently picked up both a 44 and 53 lb, and the coating is quite a bit rougher than in the past. Almost sandpaper like. Equally disappointing was there are areas under the handle which are missing paint, as well as spots that look like they were haphazardly patched to cover up manufacturing defects. The kettlebells are expensive relative to other brands and also cost quite a bit to ship. For the price I expect better quality out of the box.
Helpful?
Yes · 5
No · 0

Response from Rogue Fitness:

May 16
Thank you for bringing this to our attention and we're sorry if these arrived with any quality issues. We have reached out to offer our assistance in getting this resolved.
Old Man in Plainfield
Illinois
★★★★★
★★★★★
May 9
Great Kettlebells For the Price
This is the 9th E-coat kettlebell I’ve bought from Rogue. They are all a great value. The finish isn’t real shiny, but is good quality and durable. The handles are a good size for me and the shape works well. My only quibble with the 32 is that the imprinted logo has some rough edges that snag my shorts when I do carries with it.
Helpful?
Yes · 1
No · 0
Bobbie bent over rows
★★★★★
★★★★★
May 8
ROGUE quality armarment! Fire away!!
Great kettlebells. Excellent finish and durability. Should be good for years of physical punishment and body training old school full body workouts. Good job ROGUE! Keep them coming! Jack Lalane and Joe Weider would have loved lifting and twisting with these cannonballs!!
Helpful?
Yes · 1
No · 0
Marc79
Conway SC
★★★★★
★★★★★
May 5
16kg E-Coat review
I recently received a new Rogue 16kg/35lb bell. After a few weeks of use, here’s what I’ve found. Rogue’s customer service is top notch. I wouldn’t hesitate to recommend them to anyone. The handle and horns have been ground smooth with no burrs or deep grooves. The E-Coat finish is nice, but just a bit gritty on the bell. I’ll probably smooth that out with some steel wool. The base is ground flat, but has slight casting imperfections on the outer edge of the base resulting in rough edges and missing material. The weight of the bell using the same bathroom scale I’ve used for all other bells is 36.6 lbs. Overall, I’m happy with my recent purchase.
Yes, I recommend this product
Helpful?
Yes · 3
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery