Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
568 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
568 Reviews
Made in U.S.A.
Hundo Pricing
KB-9LB Rogue Kettlebell - E Coat
$30.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$50.00
KB-35LB Rogue Kettlebell - E Coat
$60.00
KB-40LB Rogue Kettlebell - E Coat
$65.00
KB-44LB Rogue Kettlebell - E Coat
$70.00
KB-53LB Rogue Kettlebell - E Coat
$75.00
KB-62LB Rogue Kettlebell - E Coat
$85.00
KB-70LB Rogue Kettlebell - E Coat
$100.00
KB-80LB Rogue Kettlebell - E Coat
$110.00
KB-88LB Rogue Kettlebell - E Coat
$140.00
Pounds Away From HundoPricing
500LB
Total Price:
$0.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description
Gear Specs
Shipping
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Fast Rogue Shipping

Rogue prides itself on fast, professional shipping, often with same-day turnaround times. Your kettlebells will be packaged safely and efficiently, and you’ll be able to follow the progress of your order from our factory floor to your door using the online Rogue Shipping Tracker. Please note, all KBs over 70LB in weight will ship freight.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 568 Reviews
Mike E
Clarksville, TN
★★★★★
★★★★★
1 week ago
Great Kettlebell
As others have stated the finish around the handle is a bit rougher than expected. Overall I was still pleased with these. Happy to purchase American Made!
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Dumpster_jedi
Minneapolis
★★★★★
★★★★★
3 weeks ago
Not a fan
I'm a fan of the imported Rogue powder coated kettlebells but these new e coat are not what I'm looking for. They feel weird (gritty) and they could definitely grind down the edges more. Also the handle on mine had a big divit in it which really annoyed me. These feel better than the yes 4 all bells but not much better.
Helpful?
Yes · 2
No · 0

Response from Rogue Fitness:

6 days ago
We are sorry to hear this and are reaching out to investigate any potential issues.
Duke88
Orlando, Florida
★★★★★
★★★★★
3 weeks ago
E Coat is a bit rough
I bought a pair of E Coated bells, was a little disappointed by the rough finish on the handles. I recommend you go with the powder coat.
Helpful?
Yes · 1
No · 0
Jnice
★★★★★
★★★★★
4 weeks ago
Perfect kettlebell
I am so impressed with the sturdiness of this kettlebell for the price. I paid for dragon door kettlebells in the past and that cost me an arm and a leg. My 44 pound kettlebell is a great tool for swings, presses squats and cleans for a fraction of what DD charges. I highly recommend this KB!!!!!!
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Micah74
Illinois
★★★★★
★★★★★
Dec 2021
Excellent
I bought a 26lbs. Kettlebell 2 months ago. I am a total newbie to the Kettlebell, and I am 40 years old and just getting back into strength training. I was not sure on whether to get the E-Coat or the Powder Coat, but I wound up purchasing the E-Coat. The Kettlebell arrived packaged well, and I am very pleased with the quality. The handle is nice and smooth with no rough edges. I am pleased with the E-Coat. I was worried it might be slippery, but I have found it to be very comfortable, and I am not worried about it slipping out of my hands. The Kettlebell is solid, and I know it will last a lifetime. I am very pleased with the product, and I will be purchasing more in the future. If your new to the Kettlebell like I am, do yourself a favor and buy one of these Kettlebells. You will not be disappointed,
Yes, I recommend this product
Helpful?
Yes · 4
No · 1
Stevemar
SanFrancisco
★★★★★
★★★★★
Dec 2021
Great quality, simply consistent !
Bought this for my wife and she lives the tactile feel.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
ian2727
Reading, PA
★★★★★
★★★★★
Dec 2021
As always, great quality
I have three of the e-coat kettlebells; they are a great value. Other vendors always come in at a higher cost for the same weight of kettlebell. I like the e-coat for workouts and have not corroded at all. I hope to expand my collection with more e-coat kettlebells at some point!
Yes, I recommend this product
Helpful?
Yes · 0
No · 1
coheix
clermont ferrand (fr)
★★★★★
★★★★★
Dec 2021
Extremly cool
a great product for training, it's high quality i love it
Originally posted on rogueeurope.eu
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery