Rogue Vertical Plate Tree 2.0

★★★★★
★★★★★
4.8
285 Reviews
Made in U.S.A.

Rogue Vertical Plate Tree 2.0

★★★★★
★★★★★
4.8
285 Reviews
Made in U.S.A.
Rogue Vertical Plate Tree 2.0
$230.00
Extra Set of Wheels
$40.00
Includes 4 wheels & hardware

Gear Specs

BrandRogue Fitness
Made In USAYes
Length26" , 12" post length
Width24"
Height50"
Product Description

The simple, old-school plate tree is still the gold standard when it comes to efficient bumper storage at affiliates and garage gyms around the globe. That said, there’s always room for a little refinement. Rogue’s updated Vertical Plate Tree—built in the USA—improves on traditional models with a reinforced triangle-plate base, optional wheels for mobility, and re-positioned posts that enable full-size Oly plate storage on all three tiers. The unit’s new bolt-together design also reduces shipping costs while maximizing overall stability.

Read More

Vertical Plate Tree 2.0

The simple, old-school plate tree is still the gold standard when it comes to efficient bumper storage at affiliates and garage gyms around the globe. That said, there’s always room for a little refinement. Rogue’s updated Vertical Plate Tree—built in the USA—improves on traditional models with a reinforced triangle-plate base, optional wheels for mobility, and re-positioned posts that enable full-size Oly plate storage on all three tiers. The unit’s new bolt-together design also reduces shipping costs while maximizing overall stability.

Compatible with any and all IWF standard Olympic plates, the Vertical Plate Tree 2.0 is equipped with six 12” long storage posts (three on each side) constructed from 1.5” Schedule 40 pipe. Each of the posts on the roughly four-foot tall tree are evenly spaced at 18.275" on center to offer a good mix of versatility and storage capacity.

*Please note that any metal-to-metal contact with the coated storage posts (such as adding and/or removing plates) may cause wear on the finish over time.*

See More: Plate Storage Units Available from Rogue

Gear Specs

SPECIFICATIONS

  • Made in the USA 
  • 26" , 12" post length L x 24" W x 50" H
  • New, Bolt-Together Base Design w/ Triangle Plates
  • (6) 12” Plate Storage Posts – Schedule 40 construction
  • All 3 Tiers compatible with Full-Size 450mm / 1.9" OD Olympic Plates
  • Weight post spacing: 18.275" on center
  • Optional Set of (4) Wheels Available (Imported)
Shipping

ROGUE FAST SHIPPING

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your day.  Order today, track today.

Recommended Products

Reviews

1 - 8 of 285 Reviews
WillInTexas
Grapevine, Texas
★★★★★
★★★★★
5 weeks ago
Creative bolting can expand storage
Great plate tree. It is possible to install four infinity short plate posts (facing inward) and four infinity/m lite horizontal bar holders (facing outward) on the bottom but it requires creative bolting. Basically you will need to buy, cut, or otherwise acquire bolts that are just short enough to go inside the tubing but long enough to pop out and provide enough threads to fit the lock washer and nut. Technically you could fit six mlite bar holders (three on each side) but you should first decide what you want to do with the upright holes. For instance if you put a chain hanger it would probably stick out so far that the bar holder would be unusable. If you want to be able to roll the thing with 1000+ lbs on it you can’t use the stock wheels Rogue sells. You can however use McMaster Carr #9795T55 That part is rated for 750lbs per caster so you will be good. Of course if you have really squishy flooring then don’t bother because nice casters won’t make a difference.
Yes, I recommend this product
Big boy
Helpful?
Yes · 1
No · 0
TriscuitGravy
Austin, TX
★★★★★
★★★★★
April 26
Bubbling coating
I understand that the coating will start to come off, but it started a few months after purchased and has gotten worse. I have only purchased this a few years and started to see the peeling right away. Does the job of store plates.
Peeling coating
Helpful?
Yes · 1
No · 0
An Old Man
Sun Valley, ID
★★★★★
★★★★★
April 26
Solid without question
I have this tree without wheels and it's 100% solid - even with 45 lb plates on the top pins. My only issue is that it would be nice if the pins were smaller in diameter. They are the same size as a weight bar and it can be a two handed job to get plates on/off. A smaller diameter would allow easier single handed on and off.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Gaudette
Quebec
★★★★★
★★★★★
March 6
Very nice
Around 800lbs on it and it looks like it could hold double. Still roll pretty well. Typical rogue stuff (not all weight plates were there on picture)
Yes, I recommend this product
Originally posted on roguecanada.ca
jsaylor525
Tennessee
★★★★★
★★★★★
February 17
Solid but scratchs comp plates
Does a great job of holding my comp plates, 8x45, 8x25, 8x10, and change plates. Unforanetly the comp plates have all been scratched by the bolts on the bottom, where the tree connects.
Helpful?
Yes · 4
No · 1
Touchofstrengh
Florham park nj
★★★★★
★★★★★
January 15
Sturdy
Perfect for my personal training studio. It does the job
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Monroe, NY
★★★★★
★★★★★
Dec 2022
Best plate tree
Awesome so much room and on wheels. Also you can add an arm which brings you up to 7 arms!
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Gonzo432
Midland Texas
★★★★★
★★★★★
Dec 2022
A Monster of a storage rack!
Need a plate storage this is the way to go! Fast shipping. This went great with my purchase of my calibrated plates from Rogue. The wheels were a nice add on as well.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery