Daily Shipping Deals





Rogue Vertical Bar Hanger

Special Price $32.50

Regular Price: $32.50

Rogue Vertical Bar Hanger

Vertical Barbell Storage Gets Elevated

Available as a single-bar or triple-bar storage accessory, the compact Rogue Vertical Bar Hanger is made in the USA from 0.1875" thick laser cut and formed steel, with a Protective UHMW plastic layer lining. Rather than sliding a barbell sleeve-first into a tube on the floor—like most standard vertical bar holders—this unit allows you to set up a wall-mounted or rack-mounted hanger that can store your bars efficiently above the ground, limiting the risk of any wear and tear during regular stowing and removal.

The UHMW lining helps prevent any harsh contact with the bar’s collar when you set it on the hanger, and additional Protective UHMW plastic layer on the edge of the unit keeps each bar stabilized and secure when not in use.

The rack-mounted version of the Rogue Vertical Bar Hanger comes with all necessary hardware, and is intended for use only with Infinity or Monster Lite Series rigs and racks. For owners of a Rogue Fold Back Rack, the Vertical Bar Hanger is particularly versatile, as you can still store your bars on the outside of one of the panels when the rack is folded in. The Vertical Bar Hanger is NOT recommended for use with specialty bars and the Rogue Beater Bar.

Please Note: The wall-mounted version of the Vertical Bar Hanger does NOT come with hardware. The mounting holes are 0.375" in diameter, so we recommend using 0.3125" diameter hardware.


  • Made in the USA
  • 1-Bar and 3-Bar storage options
  • 0.1875" thick laser cut and formed steel construction
  • Wall-Mount or Rack-Mount (compatible with Infinity or Monster Lite racks/rigs)
  • Mounting Hardware included ONLY for rack-mount version
  • Protective UHMW plastic layer
  • Depth: 4.25" (depth) extension from mounting area
  • Length: Triple Bar - 12"
    Single Bar - 6"
  • Height: 3"
  • NOT recommended for use with specialty bars or the Rogue Beater Bar

See More: Barbell Storage Options Available from Rogue

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight Triple Bar - 6LB
Single Bar - 3LB
Length Triple Bar - 12"
Single Bar - 6"
Width 4.25" (depth)
Height 3"
Other Product Specs Protective UHMW plastic layer
Steel Notes 0.1875" thick laser cut and formed steel
Infinity Compatible Yes
Monster Lite Compatible Yes
Rogue Vertical Bar Hanger is rated 4.6 out of 5 by 46.
Rated 4 out of 5 by from Good I kind of like it but kind of don't like it because of the width. I would have designed it so that the bolts mount on typical 16" centers. It does serve the purpose though.
Date published: 2019-10-04
Rated 5 out of 5 by from Off Label Use...see pics I purchased the triple bar wall mount and single bar rack mount. Great value and very useful. I added support behind drywall before mounting the triple bar hanger so I wouldn’t need to have a stringer visible on the wall surface. I also painted the lag bolts black to blend in. Make sure to use proper mounting hardware...it has to hold up to 3x45lb bars. It’s a great storage solution. I also have the single bar rack hanger. I didn’t like it mounted to the rack bec it would get in the way when using another bar in the rack. I was just going to mount it to the wall as a single bar holder when I found an off lable use for it. I now use it to hold up my hex bar against the wall. It’s mounted just high enough so the hex bar is still sitting on the ground but holds it up against the wall very securely. I mounted a small piece of stall mat with a hole drilled out to hold the bottom of the bar in place. It’s worked really well. I personally didn’t like hanging a bar on my rack but I highly recommend these hangers and the single hanger can hold a hex bar too!
Date published: 2019-09-02
Rated 5 out of 5 by from Just what my home gym needed! Perfect! Fits basically anywhere and super easy to install and utilize. My wife and I love this storage rack!
Date published: 2019-07-30
Rated 4 out of 5 by from Nearly perfect I got lucky and was able to mount it directly onto studs, no stringer needed. First I drilled pilot holes with a 1/4 inch bit, then I used lag screws 5/16 by 3.5 inch (item number 67325 at Lowes) and they worked great. My only issue with this is how sharp the screws on the bottom are. I hang two loadable dumbbells and you need to take care not to hurt yourself when you hang them. I also wouldn't mind if they sent it with some lag screws, but it was only a few dollars to get the ones I needed. I put it 70 inches off the floor (measured to the bottom of the bar hanger) so I can also hang the barbell if/when needed.
Date published: 2019-07-29
Rated 5 out of 5 by from Holds Bars Sturdy, does the job of holding my few Rogue bars. Required installation of a stringer behind it — but I just extended the ones I was installing for my wallmount rack. Would love if Rogue put PDFs of all their products on their web page so we can plan ahead for installations!
Date published: 2019-06-22
Rated 5 out of 5 by from Strong Perfect solution to getting the bars out of the way when you aren't using them.
Date published: 2019-05-29
Rated 5 out of 5 by from Cant beat it! awesome space saver, very secure love it in my home gym
Date published: 2019-04-07
Rated 5 out of 5 by from Perfect Put this up in my garage gym for safe storage and couldn’t be happier.
Date published: 2019-03-04
  • y_2019, m_10, d_15, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_46
  • loc_en_US, sid_RA094, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue