Daily Shipping Deals





Monster Single Bar Holder

Monster Vertical Mount Single Bar Holder
Monster Horizontal Mount Single Bar Holder

**WARNING: The Rogue Single Bar Holder should NEVER be mounted below a pull-up bar, and ALWAYS on the exterior of a Rack/Rig/Squat Stand. Failure to follow these guidelines may result in severe injury.

Monster Single Bar Holder

The Monster version of our space-efficient Single Bar Holder includes 1-inch bolts and fasteners, with mounting plate holes 6” on center. Attached to any Monster Series rig, rack, or squat stand, the Bar Holder's 7-inch steel storage tube will work with most standard Olympic barbells, stabilizing the bar upright and protecting its knurling from unnecessary wear and tear.

The mounting plate on this barbell storage system is uniquely designed to give you the option of a vertical mount (recommended on racks and rigs) or horizontal mount (for squat stands). In either instance, the Single Bar Holder should be mounted only on the exterior of the unit, and never directly under the area reserved for pull-up bar use.

Monster Single Bar Holder Specifications:

  • Made in the USA
  • Dimensions: 5 1/4" x 3" x 11"
  • Steel Tube: 7” height, 2” inside diameter
  • 1” bolts and fasteners
  • Holes in Mounting Plates 6” on Center
  • Mounting Hardware Included

Important: This barbell holder is compatible only with Rogue Monster Series Rigs, Racks & Stands. For our Infinity and Monster Lite version, see the standard Rogue Single Bar Holder.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 5 1/4"
Width 3"
Height 11"
Other Product Specs Holes on mounting plate at 6" on center. Mounting hardware included.
Steel Notes 2" Inside diameter steel tube.
Monster Compatible Yes
Monster Single Bar Holder is rated 4.7 out of 5 by 9.
Rated 5 out of 5 by from Make it Fit!! Didn't think about it but my garage ceiling was too short, I couldn't fit the bar in. I have the Monster Lite with the footed base. Attached it to the foot, bar squeezed in! might help somebody with the same rack, and same ceiling height
Date published: 2018-07-26
Rated 5 out of 5 by from Perfect addition to S-2 squat rack Perfect to hold bar on side to utilize the pull up bar or storage.
Date published: 2018-05-30
Rated 5 out of 5 by from Minimalist Rack Accessory I can't believe it took me so long to make this purchase. I believe it's added way more functionality to my garage gym space and keeps things tidy and neat. Overall I would recommend it. I understand that it's not lined and could "scratch" the bar sleeve but we are throwing loads of plates on there anyway so no big deal!
Date published: 2018-05-23
Rated 5 out of 5 by from Great option if you have a limited amount of space I purchased the single bar holder about a month ago. It’s perfect for what I was looking for. Heavy duty construction holds a standard 45 lb bar with ease and is a perfect space saver. My only complaint would be that the holder does not have a protective lining so you may damage your bar if you are not careful.
Date published: 2018-03-17
Rated 5 out of 5 by from Rogue Fitness Landmine Rogue did it again and kicked my workouts up again. I love it.
Date published: 2017-09-14
Rated 5 out of 5 by from Super storage for very small gym I recently reviewed The Strip with the landmine attachment and loved it because it takes up virtually no floor space when not in use. I won't even go into all of the benefits of landmine exercises. Well, same applies to the single bar holder. Instead of leaning it in a corner or tripping over it on the floor the bar now has a safe home with no chance of falling or access. Any small basement/garage gym should consider The Strip and multiple accessories.
Date published: 2017-09-03
Rated 4 out of 5 by from Updated to 4 stars for the Horizontal mount The horizontal mount allows you to have the space to adjust the strap safeties without having to remove the bar from the holder... And thank you to Rogue's excellent customer service for the exchange! a UHMW ring around the cup would make this a 5 star product
Date published: 2016-03-23
Rated 3 out of 5 by from Holds the bar, but has shortcommings It does what it's supposed to do, but needs to be improved imo. 1) the vertical bar holder can only be mounted on the sides due to lower cross members taking up hole real estate at the bottom. you cant bring it up higher on the front or the 7ft bar will be too high up. suggestion: offer slightly longer replacements screws and make the base of the bar holder longer in order to utilize the same holes as the cross members 2) it would be great if there was lining or a UHMW ring around the cup so that it would not scratch up sleeves (specifically specialty bars). 3) for straps or swing in safeties, you have to remove your bar in order to adjust when you have the bar mounted on the side... in hindsight i would have gotten the horizontal bar mount if I had known that. I guess I'd recommend it if you have no storage alternative, but I'd like to see a 2.0 version that addresses point 1 and/or 2 above.
Date published: 2016-02-23
  • y_2018, m_11, d_13, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_XX11363, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue